Top Hydraulic Bale Press

Dulytek Retrofit Heat Caged Plate Kit 3 x 8 Anodized Aluminum Plates for 15-30 Ton Hydraulic or Air-Operated Shop Presses

  • 3" x 8" Dual Heating Insulated Plates For 15 - 30 Ton Hydraulic or Air-Operated Shop Press.
  • High Pressure Operation Makes Pressing At Lower Temperature To Obtain Pretty Good Consistency.
  • For Pairing with Powerful Hydraulic or Air-Operated Shop Presses.
  • Precise Two-Channel Digital Controller with Temperature & Press Timer and Magnetic Feet.
  • Fahrenheit and Celsius Temperature Scale Options.
  • Caged Plates (DHPK38), Control Unit, AC Power Cord and Operation Manual Enclosed.
Check Stock

Dulytek Retrofit Two Channel Heat Plate Kit 3 x 6 Anodized Aluminum Caged Plates Working with 10-20 Ton Hydraulic or Air-Operated Shop Presses

  • 3" x 6" Caged Two Channel Dual Heating Insulated Plates For 10 - 20 Ton Hydraulic or Air-Operated Shop Press.
  • High Pressure Operation Makes Pressing At Lower Temperature To Obtain Pretty Good Consistency.
  • Paired with Powerful Hydraulic or Air-Operated Shop Presses.
  • Digital Controller with Temperature & Press Timer.
  • Fahrenheit and Celsius Temperature Scale Options.
  • Caged Plates (DHPK36), Control Unit, AC Power Cord and Operation Manual Enclosed.
Check Stock

Dulytek DHP7 Hydraulic Heat Press Machine 7 Ton Pressing Force Dual Heat 6 Plates Precise Two-Channel Control Panel - [Starter Kit Included]

  • 14000 psi Ram Hydraulic Jack Ensures Successful Pressing at Relatively Low....
  • Leak-Free Removable Hydraulic Bottle Jack for Easy Replacement.
  • Reinforced Jack Handle to Add Strength and Durability.
  • Upgraded Body Frame to Hold Up To 12-Ton Force.
  • Ergonomic Handle Design Allows You to Move the Press Conveniently.
Check Stock

Mophorn Hay Spear 49\ Bale Spear 3000 lbs Capacity, Bale Spike Quick Attach Square Hay Bale Spears 1 3/4\ Wide, Red Coated Bale Forks, Bale Hay Spike with Hex Nut & Sleeve with 2 Stabilizer Spears

  • Durable Quality: This hay bale spear is made of high-strength spring steel.
  • it is sturdy and durable, with a bearing capacity of up to 3000lbs, and can be used to move any size of hay bales..
  • Special Design: Our 49-inch hay spear went through special heat treatment. Thus it is not easily deformed. In addition, the spear's surface is powder-coated for corrosion-resistance..
  • Easy to Install: Our bale spear can easily attach to and remove from the quick attach hookups and hitches the receiver of your equipment due to the convenient bolt and nut system..
  • Strong Penetration: With its sturdy steel rod and sharp taper-shaped point, the hay bale spike can easily penetrate your bales without pushing them off of their stack and quickly getting out..
  • Wide application: Our hay bale spear is compatible with various implements, such as tractors, loaders, cranes, telehandlers, etc. It is a perfect tool for your farm work or agribusiness..
Check Stock

Bonvoisin 10T Hydraulic Cylinder Jack Porta Power Mini Hydraulic Ram Multi-Acting Low Profile Lifting Cylinders for Machinery Shipbuilding (Cannot Retract Automatically)

  • [Ultra-thin & Portable] - This hydraulic cylinder is portable, small in size, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces..
  • [Note] - After the pressure is relieved, the piston of the jack ram CANNOT retract by itself! You must use gravity to press the jack to retract, which is not a quality problem..
  • [Used with Pumps] - The porta power should be used with hydraulic pumps. The 10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2)..
  • [Wide Applications] - This hydraulic jack can be widely used in power, chemical, steel, bridges, shipbuilding, machinery and other industries! However, it does NOT apply to cars..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the cylinder jack, you can replace it for free..
Check Stock

Hydraulic Fruit Wine Press - Electricity-Free/Water-powered Cider Wine Bladder Press Natural Juice Making 5.3 Gallon with Filter Bag/Splash Guard

  • ...ormal domestic water supply and turn the tap on. The tap water expands the rubber diaphragm inside the press and presses the ground fruit against the mesh basket. The pressure and pressing time can be regulated by turning on the tap more or less..
  • Easier to Use - Simply grind fruit, grapes or berries and fill up the hydraulic press, turn the tap on and watch as the pressure of the incoming tap water compresses the ground material from the inside to the outside against the mesh basket.(Supplied with 1 pack filter bag and splash guard against splash water).
  • Multifunction Hydraulic Press - This Bladder presses are suitable for pressing juice from pre-shredded apples, grapes, red currants and many other fruits, vegetables and berries. It can also be used for pressing rhubarb, honeycomb, tomatoes, macerated tobacco or citrus fruit..
  • HIGH JUICE YIELD/LESS WASTE - The rapid pressing and the short flow distance preserve the vitamins.
  • the juice has a wonderfully fresh aroma. Due to the high pressure applied, you achieve an exceptionally high juice yield, even if the press basket is only partially filled..
  • Advantages:Much quicker than a traditional press/Easier to clean/Less oxidation of juice/Less effort as the water does all the work/Works off a standard mains t....
Check Stock

Hydraulic Fruit Wine Press - Electricity-Free/Water-powered Cider Wine Bladder Press Natural Juice Making 10.7 Gallon with Filter Bag/Splash Guard

  • ...ormal domestic water supply and turn the tap on. The tap water expands the rubber diaphragm inside the press and presses the ground fruit against the mesh basket. The pressure and pressing time can be regulated by turning on the tap more or less..
  • Easier to Use - Simply grind fruit, grapes or berries and fill up the hydraulic press, turn the tap on and watch as the pressure of the incoming tap water compresses the ground material from the inside to the outside against the mesh basket.(Supplied with 1 pack filter bag and splash guard against splash water).
  • Multifunction Hydraulic Press - This Bladder presses are suitable for pressing juice from pre-shredded apples, grapes, red currants and many other fruits, vegetables and berries. It can also be used for pressing rhubarb, honeycomb, tomatoes, macerated tobacco or citrus fruit..
  • HIGH JUICE YIELD/LESS WASTE - The rapid pressing and the short flow distance preserve the vitamins.
  • the juice has a wonderfully fresh aroma. Due to the high pressure applied, you achieve an exceptionally high juice yield, even if the press basket is only partially filled..
  • Advantages:Much quicker than a traditional press/Easier to clean/Less oxidation of juice/Less effort as the water does all the work/Works off a standard mains t....
Check Stock

SWAG Off Road 20 TON Finger Brake Heavy Duty DIY Builder Kit

  • Attach to Most Standard 12-Ton or 20-Ton Hydraulic Shop....
  • Upper Die Mounting Cup Inside Diameter: 41....
  • Overall Dimensions: 14.50 in. Wide x 7.50 in. Deep x 9.25 in. High JEGS 81492 Press Break Attachment for 12-Ton or 20-Ton hydraulic shop presses makes....
  • Bends mild steel and aluminum with a maximum width of 12 in. and thickness of 3/8....
Check Stock

YUEWO 5.8Gal/22Litres Stainless Steel Still Wine Making Kit Water Distiller Home Brewing Kit for DIY Whisky Wine Brandy Gin Vodka Alcohol (Produce 92% ABV)

  • ...ormal domestic water supply and turn the tap on. The tap water expands the rubber diaphragm inside the press and presses the ground fruit against the mesh basket. The pressure and pressing time can be regulated by turning on the tap more or less..
  • Easier to Use - Simply grind fruit, grapes or berries and fill up the hydraulic press, turn the tap on and watch as the pressure of the incoming tap water compresses the ground material from the inside to the outside against the mesh basket.(Supplied with 1 pack filter bag and splash guard against splash water).
  • Multifunction Hydraulic Press - This Bladder presses are suitable for pressing juice from pre-shredded apples, grapes, red currants and many other fruits, vegetables and berries. It can also be used for pressing rhubarb, honeycomb, tomatoes, macerated tobacco or citrus fruit..
  • HIGH JUICE YIELD/LESS WASTE - The rapid pressing and the short flow distance preserve the vitamins.
  • the juice has a wonderfully fresh aroma. Due to the high pressure applied, you achieve an exceptionally high juice yield, even if the press basket is only partially filled..
  • Advantages:Much quicker than a traditional press/Easier to clean/Less oxidation of juice/Less effort as the water does all the work/Works off a standard mains t....
Check Stock

Mophorn Hydraulic Hose Crimper Hydra-Krimp 71500,Manual AC Hose Crimper Kit Air Conditioning Repaire Handheld,Hydraulic Hose Crimping Tool with 7 Die Set for Barbed and Beaded Hose Fittings

  • Durable Crimping Tool: Our crimper is made of aluminum alloy material, ensuring its durability. Stamper hardness can reach up to 53 HRC to bear a....
  • Integral Hydraulic: This hand-held integral hydraulic press A/C hose crimper is made for easy use. The hydraulic tool is designed with exquisite....
  • Instant Setup: Our hydraulic crimper can be installed according to the following steps: First, select the correct die to insert, insert the pin, then....
  • Lightweight & Compact: One-person operation saves your time and energy. Besides, the crimping tool kit is stored in a plastic toolbox, reducing the....
  • Wide Application: The crimping tool has a base that can be mounted to a bench for easy use, or the base can be held by any vise. It is compatible with....
Check Stock

Knob for Bottle Jack Valve Release Screw On Harbor Freight Hydraulic Press Made of 6061 Aluminum (3/8\)

  • hydraulic jack valve release screw knob comes in two sizes to either the jack screw with a 3/8" and 7/18" diameter valve release screw.
  • It is machined from a solid bar of 6061 aircraft quality aluminum, The knob also has a longer knurled section ,for extra grip..
  • It slides on over the release screw, turns 1/4 turn then secured in place with a set screw (included) from the end of the knob. You will need to use a 5/32 hex key (Allen wrench).
  • This particular part is designed for the Harbor Freight Hydraulic Bottle Jack used in the 6, 12 & 20 ton arbor presses but will work on any bottle jack with a 3/8 and 7/18" diameter valve release screw having a.
  • DO NOT USE WHEN LIFTING VEHICLES: ONLY TO BE USED ON HYDRAULIC PRESS APPLICATIONS!.
Check Stock

Standlee Hay Company 1200-20021-0-0 Timothy Bale 50 lb Red

  • Great for using around the farm or stable.
  • Timothy Grab N Go Compressed Bale Of Forage.
Check Stock