Top Hydraulic Forging Press

Chamber Wax Pen Red

  • 14000 psi Ram Hydraulic Jack Ensures Successful Pressing at Relatively Low....
  • Leak-Free Removable Hydraulic Bottle Jack for Easy Replacement.
  • Reinforced Jack Handle to Add Strength and Durability.
  • Upgraded Body Frame to Hold Up To 12-Ton Force.
  • Ergonomic Handle Design Allows You to Move the Press Conveniently.
Check Stock

VEVOR Hydraulic Cylinder Liner Puller 15 Ton Liner Puller Tool, Both Dry-Type and Wet-Type Fit Diameter of 80mm-140 mm, Universal Cylinder Liner Puller Tool Set for auto Repair and Disassembly

  • 15t Hydraulic Puller: Max Capacity: 15T. This hydraulic cylinder puller is suitable for all cylinders with a diameter of 80-140 mm. Both dry type and wet type can be used. It's ideal for the disassembly of internal combustion engine and cylinder liner..
  • Superior Quality: The hydraulic puller is made of premium steel and processed by precision forging. It is sturdy, corrosion-proof, and has stable performance. The support seats, lead screw, and screw nut are all thickened, which will be more durable..
  • Complete Puller Kit: A complete set of tools required for removing the internal combustion engine and cylinder liner. Every part is included, and they are easy to assemble. Our cylinder-pulling artifact can easily remove the cylinders without damage the original parts..
  • Easy Operation: This 15t cylinder liner puller is very simple to use. All you need to do is adjust the inner diameter of the cylinder liner that you need to pull out, and you can use it directly—no need to take down the crankshaft..
  • Wide Application: Suitable for the removal of internal combustion engines and cylinder liners. Also, suitable for pulling hubs, flanges, gears, bearings, and more. It is a great helper for the auto repair shop, garage, automobile maintenance..
Check Stock

uxcell PHSB8 Rod End Bearing 1/2-inch Bore Pre-Lubricated Bearing 1/2-20 Female Thread Right Hand

  • Type: 1/2" Hole x 1/2-20 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensure long service life..
  • Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell POSB8 Rod End Bearing 1/2-inch Bore Pre-Lubricated Bearing 1/2-20 Male Thread Right Hand

  • Type: 1/2" Bore x 1/2-20 right-hand male thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearing 3/8-inch Bore Pre-Lubricated Bearing 3/8-24 Female Thread Right Hand

  • Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

OTC 1834 25-Ton Capacity Shop Press with Air-Driven Hydraulic Pump

  • OTC's tough, economical, 25-ton capacity press features heavy steel construction with a durable powder coat finish and is ideal for pressing rear axle bearings, piston pins, and much more.
  • Large 30 inch x 46 inch work area under ram makes positioning of even bulky work easy.
  • Pneumatically driven hydraulic pump with simple foot operation keeps both hands free.
  • press bed is raised or lowered with a hand crank, allowing one-person set-up and operation.
  • Complete with No. 4020 Air-Driven Hydraulic Pump, No. 9652 Gauge, No. 24815 Tee, No. 9768 Hose, No. 51426 Hydraulic Ram with 6-1/4 inch stroke.
  • Unit stands 69-1/2 inches tall, 40-1/2 inches wide, and 28 inches deep.
  • frame extension holes are on 4 inch centers.
  • backed by OTC's Lifetime Marathon Warranty.
Check Stock

NA Black Hydra Krimp 71500 AC Hose Crimper

  • The lightweight hand-held hydraulic press is very portable..
  • Crimping pipes and fittings in an easy and labor-saving way..
  • The kit is applicable for beadlocking fitting and barrier A/C hose..
  • The dies snap quickly into the press fixture requiring no pins or screws..
  • Wide Application: The hydraulic crimper is ideal for shop and field operations, crimping pipes and fittings in an easy and labor-saving way. Customize....
Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Right Hand 2pcs

  • Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Left Hand 2pcs

  • Type: 3/8" Bore x 3/8-24 left-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell POSB4 Rod End Bearings 1/4-inch Bore Pre-Lubricated Bearings 1/4-28 Male Thread Right Hand 2pcs

  • Type: 1/4" Bore x 1/4-28 right-hand male thread rod end. Maximum angular misalignment: 13 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 6.6KN Static Load Capacity, 4.5KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

CNCEST Press Heat Machine, 5T Hydraulic Jack Heat Press Machine 2.4X4.7 Inch Dual Heated Platens 900W Heat Press Plates w/Precise Pressure Gauge & LCD Controller for Efficient Press

  • 【Wide Application】Hydraulic tech heat press machine is widely used for extraction of PU leather,plastic particles,dry flowers and plants.Maximize your starting material’s potential and desired outcomes. For each starting material, easily experiment and record your notes for future reference..
  • 【High Quality Heat Plate】The heat press comes with 4cm thick solid aluminum heating element, uniform heating, and smooth surface, heating plate size 6*12cm (2.4"*4.7")..
  • 【Manual Hydraulic Jack】The heat press machine is equipped with 5 tons manual hydraulic jack, high pressure pumping oil.
  • Continuously update the process, pass thousands of durability tests, continue to simplify operations,the convenient switch of heat press make it easier for you to use.
  • 【Accurate LCD Controller】The controller box is movable, the heating speed is faster, and the touch LCD screen can accurately display the time and temperature, with good performance..
  • 【Service Guarantee】Fast shipping from Amazon.
  • Satisfied problem solutions response within 24 hours.
  • Assured promise for return,replacement,refund based on quality & shipping problems(please keep efficient contact through amazon with us if needed)..
Check Stock

AMZCNC Hydraulic Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/8" 3/16" Cable –Wire Swaging Tool 8 Ton and Stainless Steel Cable Cutter

  • Compatibility : Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Maximum crimping power:10 tons. Stroke : 12mm. The hydraulic crimper is suitable for power wires, electrical cables, battery cables and welding cables. Cable Cutter Cuts up to 5/32" stainless steel cable..
  • Material: Made of durable materials with high strength and good toughness. Dies are made of hardened steel with chrome finish.Vinyl-dipped grip for comfort and easy control. Cable Cutter: Using SK5 high carbon steel Seiko forging, durable..
  • Size: Hydraulic Hand Crimper Tool: Length:approx.12.2 inches, Weight:approx.N.W3.8lb G.W6.6lb. Cable Cutter: 8.1 x 2.8 x 1.4 inches, Weight:11.2 ounces..
  • Easy to use: On/Off control for fast operation, easy crimping and arm retraction when crimping aluminum or copper wire. A return spring is installed on the handle for easy one-handed operation of the tool.The C-style head makes side entry easier to change the dies..
  • What you get: Includes die positioning pin, seal rings, strong protective carrying case, cable cutter and pair of work gloves..
Check Stock