Top Hydraulic Directional Drilling Rig

Chief G Series P80 Hydraulic Directional Control Valves - Hydraulic Speed Control Valve - 3 Spool, 21 GPM, 4 Way 3 Pos Spring Center, SAE 10 Inlet and Work Ports, SAE 12 Outlet Ports, 3625 PSI

  • Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
  • 5 Spool Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
  • Double Acting - This control valve comes with 5 spools and SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
  • High Efficiency - The relief valve range is up to 3600 PSI and the maximum flow is up to 13 GPM.
  • Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, log splitters, and more.
Check Stock

CROSS Manufacturing SBAF2J 143430 SBA Series Cast Iron Double Spool Monoblock Hydraulic Directional Control Valve with joystick, 1st Spool 4-Position Float, 2nd Spool 3-Position, Open Centered, 3/4\ x 3/4\ x 1/2\ NPT Female, 2500 psi, Grey

  • Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
  • 2 Spools Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
  • Double Acting - This control valve comes with 2 spools and #8 SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
  • Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, and more.
  • Max Pressure: 3600 PSI, Inlet Port: SAE 10, Outlet Port: SAE 12, Working Ports: SAE 10, Fluid Temperature: 5 to 176℉, Valve Type: 4 way 3 positions, Mounting: 3 bolts m8 needed.
Check Stock

CS Unitec ETN 162/3 P - 6-3/8" Capacity Concrete Core Drill - Wet/Dry Diamond Core Drill - 3-Speed For Concrete, Brick, Block, and Stone - MADE IN GERMANY - 110V

  • Heavy-duty, light-weight hand-held core drill rig with 6-3/8" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
  • Powerful 19.5 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 3 speed gear box (0-510/0-1150/0-2500 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
  • Only 15 lbs., Collar Diameter 60mm collar for easy mounting, rig mounting kits available. Easy Changeover for wet / dry drilling with integrated connections..
Check Stock

Hydraulic Loader Directional Control Valve LV22RFSTKAB Joystick Regen - 10GPM 4000PSI

  • SPECIFICATIONS: Our 2 spool directional control valve for double-acting hydraulic rams has 21 GPM, 3 position spring center and 4 positions, SAE 10 inlet and work ports and SAE 12 outlet ports. This hydraulic flow control valve has 4-way valving, adjustable 1500 with 3625 PSI..
  • VERSATILE: This G series P80 DCV has a 3 position spring center and 4 positions that allows an actuator to open and close. This 2 spool control valve can be used in any hydraulic circuit..
  • PRECISE FLOW: Simple and compact, the hydraulic joystick valve has one spool with a 21 GPM flow rate that precisely controls the direction of the flow of hydraulic fluids. This plow valve has a wide range of applications, including in log splitters..
  • MANUAL CONTROL: This high-pressure control valve comes with a joystick lever actuator for controlling the spool. You can control the log splitter valve manually, without an external, additional control system..
  • TANDEM CENTER: This adjustable relief valve is equipped with a spring tandem center. Since the fluid directly flows back to the hydraulic tank the hydraulic orbit motor prevents overheating and reduces noise during operation..
Check Stock

RuggedMade 25 GPM Hydraulic Log Splitter Directional Control Valve, Auto Return Detent Lever Handle, 2750 PSI (1/2\ Work Ports)

  • SPECIFICATIONS: This 2 spool valve from Chief’s G Series is a directional control valve with a joystick, 2 spool spring to neutral tandem center, 10 GPM flow rate, SAE 8 work, and SAE 10 inlet/outlet ports. Its maximum working pressure is 3625 PSI..
  • HIGH UTILITY: Our hydraulic valve 2 spool has wide-ranging utility since it can be effortlessly shifted in 3 different positions, providing increased directional control of the actuators. The 3 pos setup also reduces heat buildup..
  • CONSISTENT: The log splitter valve has a spring to neutral tandem center and is therefore consistent, making it a great support for fixed-volume pumps. It is not only economical but also low maintenance..
  • MADE TO LAST: With an alloy steel body, this directional control 4-way valve is highly corrosion resistant and withstands even melting temperatures. It is extremely ductile and can outlast other similar products available in the market..
  • EASE OF USE: With a joystick control in tow, our hydraulic joystick valve offers a single push-pull and up-down control on all valves. It cuts down the force feedback from the system to the operator..
Check Stock

Tolsous 1 Spool Directional Control Valves 11 GPM 3600 PSI MAX High Pressure Integral Valve Double Acting for Small Tractors Tractors Loaders Log Splitters

  • SPECIFICATIONS: Our 3 spool directional control valve for double-acting hydraulic rams has 21 GPM, 4-way 3 pos spring center, SAE 10 inlet and work ports and SAE 12 outlet ports. This hydraulic flow control valve has 4-way valving, adjustable 1500 with 3625 PSI..
  • VERSATILE: This G series P80 DCV has a 3 position, 4-way valving that allows an actuator to open and close. This 3 spool control valve can be used in any hydraulic circuit..
  • PRECISE FLOW: Simple and compact, the hydraulic joystick valve has one spool with a 21 GPM flow rate that precisely controls the direction of the flow of hydraulic fluids. This plow valve has a wide range of applications, including in log splitters..
  • MANUAL CONTROL: This high-pressure control valve comes with a joystick lever actuator for controlling the spool. You can control the log splitter valve manually, without an external, additional control system..
  • TANDEM CENTER: This adjustable relief valve is equipped with a spring tandem center. Since the fluid directly flows back to the hydraulic tank the hydraulic orbit motor prevents overheating and reduces noise during operation..
Check Stock

Irish Setter Work Men's 83912 Marshall 11" Pull-On Steel Toe Waterproof Work Boot,Brown,10 D US

  • Heavy-duty, light-weight hand-held core drill rig with 6" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
  • Powerful 15 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 3 speed gear box (600/1300/2800 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
  • Only 16 lbs., Collar Diameter 60mm collar for easy mounting, rig mounting kits available..
Check Stock

CS Unitec END 1550 P - 2-5/8' Capacity Concrete Core Drill - Wet Diamond Core Drill - for Concrete, Brick, Block, and Stone - Made in Germany - 110V

  • Heavy-duty, light-weight hand-held core drill rig with 2-5/8" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
  • Powerful 13 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 1800 - 4400 rpm load speed dial control - concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
  • Only 7 lbs., Collar Diameter 52mm collar for easy mounting, rig mounting kits available..
Check Stock

Dymoece 2 Pairs Bicycle Disc Brake Pads for Shimano Deore Tektro TRP(Resin,Semi-Metallic,Sintered Metal) SCP-S

  • [Safety protection] The integrated hydraulic cylinder design ensures the sensitivity of the brake. It only needs to gently pull the brake lever to stop instantly, ensuring safe riding..
  • [No noise] Mountain hydraulic brakes are equipped with resin pads, which have super abrasion resistance and will not make any noise during braking..
  • [Dual Piston Brake] Bi-directional drive, increase the friction area to provide amazing power, the braking force is stable, and the rotor is prevented from being damaged..
  • [Easy installation] mountain hydraulic brake set is equipped with IS/PM universal mounting adapter, no need to assemble, it can be installed out of the box..
  • [Size]mountain bike hydraulic disc brake set The left side controls the front, the right side controls the rear, the front length is 1000mm, and the rear length is 1700mm. Default adaptation 160mm rotor..
Check Stock

OTC Tools 4278 100 GPM Hydraulic Flow Meter

  • Tests hydraulic oil circuits on your machinery with high accuracy and measures flow from 2.5 to 100 gpm.
  • Flow Accuracy to +/- 1 percent of indicated value and Pressure accuracy of +/- 1.6 percent of full scale.
  • Pressure range up to 6,000 psi and Temperatures up to 250 deg F.
  • Standard burst disc protection system prevents spillage of hydraulic fluid in the event of an overpressure condition.
  • Accommodates bi-directional flow, reads flow in both directions, pressure on the high side of valve and Port is 1-5/16" -12UN #16 SAE ORB.
Check Stock

CS Unitec ETN 2001 P Up to 4\ 2-Speed Hand Held/Rig Mounted - Wet/Dry Concrete Core Drill - for Concrete, Brick, Block, and Stone - Made in Germany - 110V

  • Heavy-duty, light-weight hand-held core drill rig with 4" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
  • Powerful 15 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 2 speed gear box (0-800/0-1570 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
  • Only 15 lbs., Collar Diameter 52mm collar for easy mounting, rig mounting kits available..
Check Stock

CS Unitec END 130/3.2-6\ Capacity Concrete Core Drill - Wet Diamond Core Drill - 3-Speed For Concrete, Brick, Block, and Stone - MADE IN GERMANY - 110V (END 130/3.1 PO)

  • Heavy-duty, light-weight hand-held core drill rig with 6" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
  • Powerful 15 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 3 speed gear box (600/1300/2800 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
  • Only 16 lbs., Collar Diameter 60mm collar for easy mounting, rig mounting kits available..
Check Stock