Top I2c Adc 1bit

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

  • ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
  • FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
  • This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.
Check Stock

JUNSHUNTONG HF VFO for Ham SDR QRP Transceiver,20K-220MHz RF Generator Superheterodyne Receiver Debugger,Tcxo Clock,S-Meter, 20 Band presets

  • 【HF VFO /RF Generator 】It has 10kHz to 220MHz working ranges. 0.5PPM high precise Tcxo clock, the frequency is more accurate. Tuning step of 1Hz, 10Hz, 1kHz, 5kHz, 10kHz and 1MHz..
  • 【VFO for Ham SDR HAM QRP Transceiver】 Used as a local oscillator on Homebrew radio receivers (such as superheterodyne, SDR, direct conversion and Homebrew QRP transceivers) ， a simple RF/clock generator for calibration reference or clock generation，a common 128x64 I2C OLED SSD1306 display and Si5351 module..
  • 【Adjustable】Intermediate frequency (IF) offset (+ or -) is adjustable.The bar graph of the signal meter through the analogs input (ADC).I2C data transmission, only need 2 lines it can be connected to the display, with high stability and accuracy of frequency generation.
  • 【20 Band Presets】Equipped with generator function mode.Initial frequency, end frequency, sweep-frequency-step can be set. 20 band presets (shortcuts) for BCB and HAM frequencies.RX/TX mode selector for Homebrew QRP transceivers..
  • 【 Guarantee】 We providing 100% satisfactory service to every customer to make sure our customer can purchase with confidence. If you have any questions, please contact us, we will reply and improve in time..
Check Stock

sb components Power Monitoring HAT 3 Channel Current/Voltage/Power Monitor HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero and Zero W, Raspberry Pi Power Monitoring HAT

  • Power Monitoring HAT allows the user to monitor current, voltage, or power in each channel.
  • Standard Raspberry Pi 40PIN GPIO extension header.
Check Stock

WayinTop 3pcs GY-521 MPU-6050 3 Axis Gyroscope and 3 Axis Accelerometer 6DOF Sensor Module 16 Bit AD Converter Data Output IIC I2C for Arduino

  • 【Easy to use】The measured values of the sensor can be interrogated by the I2C interface. The accelerometer can be operated at both 3.3V and 5V.....
  • 【Motion Processing】DMP (Digital Motion Processing) motor reduces the burden of complex fusion calculation data, sensor synchronization, attitude....
  • 【Communication modes】Standard IIC communication protocol chip integrated A / D converters (ADC), 16-bit data output, can precisely digitize the....
  • 【Universal Usable】The sensor can be used to develop various entertaining applications and systems. Ideal for projects with gaming and virtual....
Check Stock

Raspberry Pi Pico Flexible Microcontroller Board Based on The Raspberry Pi RP2040 Dual-core ARM Cortex M0+ Processor, 3pcs

  • 【High-Performance CPU】Raspberry Pi Pico features Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz. With 264KB of SRAM, and 2MB of on-board Flash memory..
  • 【Rich Hardware Interface】Raspberry Pi Pico has 26 × multi-function GPIO pins, 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels..
  • 【Custom Peripheral Support】8 × Programmable I/O (PIO) state machines for custom peripheral support.
  • 【Build Project in Tiny Size】Only 2.1cm*5.1cm ( as small as your thumb). Pico has been designed to use either soldered 0.1" pin-headers or can be used as a surface-mountable 'module'.
  • 【Multiple Software Support】Pico comes with corresponding C/C++ SDK, Micropython SDK resources.
Check Stock

Creality CR-10 Smart Motherboard CR-10 Smart 3D Printer 32-bit Silent Mainboard with TMC2208+A4988 Stepper Driver V1.2 Silent Mother Board for CR-10 Smart

  • The main control uses the ARM-level Cortex-M4 series with a 32-bit dominant frequency of 168 MHz STM32F407ZGT6 chip, performance is greatly improved..
  • Equipped with highly modular open source firmware Marlin2.0, it is convenient for users to DIY and further-development, to avoid the worry of not....
  • Motor driver support :TMC5160,TMC2208,TMC2130,ST820,LV8729, DRV8825,A4988, etc.Display screen support: BIGTREETECH- 2.8 inch TFT,BIGTREETECH-3.5 inch....
  • Support Serial WIFI Online Printing. 6 motor drives, 3 extruders, 3 CNC fans. Reserve extended ports of BL Touch, PWM, ADC, UART, I2C and SPI.
Check Stock

Ingcool Raspberry Pi Pico Senser Kit, Raspberry Pi Pico Microcontroller Board with Flexible Digital Interfaces,Based on RP2040 Microcontroller Chip,Include Humidity,Color,Liquid Sensors

  • RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom.Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz.
  • 264KB of SRAM, and 2MB of onboard Flash memory.Castellated module allows soldering direct to carrier boards.USB 1.1 with device and host support.
  • Low-power sleep and dormant modes.Drag-and-drop programming using mass storage over USB.
  • 26 × multi-function GPIO pins.2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels.8 × Programmable I/O (PIO) state machines for custom peripheral support.
  • Accurate clock and timer on-chip.Temperature sensor.Accelerated floating-point libraries on-chip.
Check Stock

SparkFun RedBoard Artemis ATP Machine Learning Development Board Includes BLE 1 megabyte Flash USB-C Qwiic I2C MEMS Microphone Compatible with Arduino IDE platform Run TenserFlow Models Mega Footprint

  • FCC/IC/CE Certified 8/16/2019 (ID Number 2ASW8-ART3MIS) on the world’s first open-source, US manufactured, BLE module.
  • 1M Flash / 384k RAM gives you plenty of room for your sketches. 48MHz / 96MHz turbo available.
  • Includes 48 GPIO pins - all interrupt capable. 31 PWM channels. Built in technology compatible with Bluetooth low energy 4.0 radio.
  • Features 10 ADC channels with 14-bit precision, 2 UARTs, 6 I2C buses, 6 SPI buses, PDM Interface.
  • Exposed JTAG connector for more advanced users to use the power and speed of professional tools.
Check Stock

SparkFun RedBoard Artemis Machine Learning Development Board Includes BLE One megabyte of Flash USB-C connector Qwiic I2C MEMS microphone Compatible with Arduino IDE Run TenserFlow models R3 footprint

  • The Artemis module has the FCC/IC/CE Certification 8/16/2019 (ID Number 2ASW8-ART3MIS) on the world’s first open-source, US manufactured, BLE module.
  • 1M Flash / 384k RAM gives you plenty of room for your sketches. 48MHz / 96MHz turbo available.
  • Includes 24 GPIO pins - all interrupt capable. 21 PWM channels. Built in technology compatible with Bluetooth low energy 4.0 radio.
  • Features 10 ADC channels with 14-bit precision, 2 UARTs, 6 I2C buses, 4 SPI buses, PDM Interface.
  • Exposed JTAG connector for more advanced users to use the power and speed of professional tools.
Check Stock

Gustard R26 Discrete R2R DAC - R2R+1Bit XMOS DSD512 PCM768kHz LDAC Balanced K2 Clock Decoder with Remote Control(Sliver)

  • Dual architecture: Independent R2R 1Bit,support native PCM native DSD and DSD to PCM..
  • PCM NOS: Without any digital signal processing,bypassing the volume adjustment,raw PCM stream was decoded by the R2R array directly..
  • Native 1Bit DAC,support DSD 512 (via USB)and DSD 1024 (via IIS).The DSD stream decoded by the independent 1 bit convertor without DSD to PCM converting. *Volume is fixed under this mode..
  • Streamer/Renderer: Support roon,upnp and more protocols in the future..
  • Replace the input signal's clock with precision oscillators (local or external). Interference from the input source's clock is avoided..
Check Stock

SparkFun Thing Plus-Artemis Machine Learning Development Board Includes BLE 1MB of Flash USB-C Qwiic I2C MEMS LiPo Charger Compatible with Arduino IDE Platform Run TenserFlow Models Feather Footprint

  • FCC/IC/CE Certification 8/16/2019 (ID Number 2ASW8-ART3MIS) on the world’s first open-source, US manufactured, BLE module.
  • 1M Flash / 384k RAM gives you plenty of room for your sketches. 48MHz / 96MHz turbo available.
  • Includes 21 GPIO pins - all interrupt capable. 21 PWM channels. Built in technology compatible with Bluetooth low energy 4.0 radio.
  • Features 8 ADC channels with 14-bit precision, 2 I2C buses, 1 SPI bus, PDM Digital Microphone.
  • Exposed JTAG pin holes for more advanced users to use the power and speed of professional tools.
Check Stock

SparkFun Qwiic Pro Micro - USB-C (ATmega32U4) - Compatible with Arduino development board 5V/16MHz microcontroller AP2112 3.3V Voltage Regulator Castellated PTH pin pads Reset button Maximum 6V input

  • Small Compatible with Arduino board. Includes Reset button, 9x 10-bit ADC pins. 12x Digital I/Os (5 are PWM capable).
  • Improved version of the SparkFun Pro Micro. ATmega32U4 running at 5V/16MHz Supported under Arduino IDE v1.0.1+.
  • On-Board USB-C connector for programming. AP2112 3.3V Voltage Regulator. PTH Pads w/ Castellated Edges.
  • Hardware Serial Connections. Includes UART (i.e. Rx and Tx), Qwiic Connector for I2C, and SPI. Has onboard Reset Button. Input maximum of 6V. Dimensions: 1.3in x 0.7in..
  • The AtMega32U4 can have the bootloader overwritten if not used properly. There is a way to fix the bootloader if needed and instructions are available online. USB drivers may be needed to be installed on a computer to communicate with the board..
Check Stock