Top Inch Case Fan

WMYCONGCONG 10 PCS 10' 4 Pin Fan Extension Power Cable Computer PC Fan Power Extension Cable for PWM Fan Computer ATX Case

  • 4-Pin male to female fan extension cable, compatible with 4pin PMW fan connector and 3pin fan connector..
  • High quality 4 pin fan splitter cable, offers greater flexibility for positioning motherboard and CPU Fans for optimal cooling, for extending fan cables in your case..
  • The fan extension cable is one 4-pin female connector to 4-pin male connector, suits for CPU or PC case fan..
  • Pacakge Content: 10 * for 4 Pin Fan Extension Cable..
Check Stock

MakerFocus Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, with Mini Cooling Fan for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi GPIO 3.5 inch Display

  • Installation instructions video: Please get the link from the product description below. PLZ NOTE: ★This case is not compatible with 3.5 Inch HDMI TFT LCD Display, It is designed to RPI 3.5 Inch GPIO Display, ★The 3.5 inch screen is not included!!!.
  • Dual-use: You can use it only on the Raspberry Pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3.5inch display,Then decide whether to cover the its cover. (Note: The Raspberry Pi motherboard and Raspberry Pi 3.5inch display are not included!!!).
  • Can install mini cooling fan: The case when used without the display screen, you can install mini cooling fan, Snap-in installation, the cooling fan was included in packaging..
  • With GPIO open position: There is a GPIO open position on this case cover,when you use it only with Raspberry Pi motherboard, it can easy to pull up and insert the GPIO pins, don't need to open the cover. This case is easy to install and has good ventilation..
  • With cable guide hole: It reserved cable guide hole for the camera, more convenient to use with camera.
Check Stock

GeeekPi Raspberry Pi 4 TFT 3.5 inch Touch Screen with Case, Raspberry Pi Fan and Heatsinks, 320x480 Resolution LCD Display for Raspberry Pi 4 Model B (Raspberry Pi Board NOT Included)

  • This kit contains an ABS case and a 3.5 inch resistive touch screen. It’s fully compatible with Raspberry Pi 4 Model B. NOTE: Raspberry Pi Board NOT Included! The fan and screen can not be installed at the same time..
  • The 3.5 inch resistive touch screen can be directly inserted into any version of the Raspberry Pi boards, but the ABS case is only compatible with Raspberry Pi 4B.
  • The resolution of 3.5 inch touch screen can be adjusted by software.
  • The screen support 125MHz SPI signal input, the refresh rate is about 50fps which is enough to play the videos or games and display stable without flicker.
  • It supports Raspbian, Ubuntu, and Kali system, the drivers and image are provided freely..
  • Package includes: 1x ABS Case for Raspberry Pi 4B, 1x 3.5 inch TFT resistive touch screen, 1x Aluminum heatsinks, 1x Touch Pen, 1x 30x30x7mm cooling fan (NOTE: this fan can not be installed with 3.5 inch screen at the same time).
Check Stock

Treedix 3.5 inch TFT Touch Screen Module 320x480 Resolution LCD Display Compatible with Raspberry Pi 4B/3B/3B+ with Touch Pen ABS Case and Cooling Fan Compatible with Raspberry Pi 4B

  • The case can be used as raspberry pi case with mini cooling fan and 3.5 inch screen installed. The ABS case is specially designed for Raspberry Pi 4 Model B only..
  • The 3.5 inch LCD touch screen has 480 x 320 resolution, with resistive touch control.
  • The LCD touch screen can use GPIO interface for power supply.
  • The LCD screen has a 2-pin interafce for connecting the cooling fan, which can allow the screen and cooling fan both working at the same time..
  • The LCD touch screen is suitable for Raspberry Pi 4B/ 3B/ 3B+ versions. When used for Pi 4B, it can support for Raspbian system, for kali Linux system. When used for 3B/3B+, it can support for Raspbian system, for ubuntu system ,for kali Linux system..
  • The case features an easy-to-install split design that protects your PI computer and screen, as well as a cooling fan mounted on an aluminum stand and a hot silicon pad for cooling the chip to keep the PI computer and screen cool..
Check Stock

KEYFANCLUB 2-Pack 80mm Fan DC 12V Computer Fan 80mm x 80mm x 25mm 2-Pin High Performance Cooling Fan

  • 【80mm fan PRODUCT PARAMETERS】Dimensions: 80x80x25mm | 3.2 x 3.2 x 1.0inch | Voltage: DC 12V | Current: 0.2Amp | Power: 2.4Watt | Speed: 2800RPM |....
  • 【12v fan WIDELY APPLICATIONS】It is best for cooling the hottest & Narrow spaces | Circulating and exhausting stuffy air | Designed for projects....
  • 【12v dc fan XH2.54-2PIN PLUG】Perfect for Rv refrigerator, desktop computer Case, Power Inverter, Solar Power Battery Box, Greenhouse, Wine Fridge,....
  • 【computer fan TWO WAY INSTALLATION】Blow warm air out of the case | Draw cool air into your case | Push the hot air out of your computer when....
  • 【12v computer fan COMPONENTS & WARRANT】It can be easily mounted with the included metal protective grill and hardware. | 12-month warranty and....
Check Stock

PC Fan Splitter Extension Cable - 1 to 2 PWM Fan Splitter Compatible with 3 & 4 Pin PC Cooling Fans, 10 inch Black Braided Nylon Cable (2 Pack)

  • Simple Installation - Our PWM splitter connects 2 computer case fans to a single fan header. 10 inch pwm fan extension cable gives you greater flexibility between the motherboard and PC fans.
  • Durable Construction - Each computer fan splitter has black braided nylon sleeved cables to provide long-lasting performance as well as to prevent dust and wear on the case fan splitter wires.
  • Increased Cooling - Our CPU fan splitter provides better power supply, supports PWM function, increases airflow, reduces the accumulation of heat within the frame and satisfies all your control needs.
  • 3 & 4 Pin Compatible - Each 4 pin fan splitter has a 4-pin female connector on one end, a 4-pin male and a 3-pin male connector on the other, this can be used with 3-pin pc case fans as a 3 pin fan splitter.
  • Money-back Guarantee - We’re proud of the PC cables we sell. If your fan splitter fails to meet your expectations for any reason, we will go the extra mile to make things right.
Check Stock

Fancasee (4-Pack) 4 Pin PWM Fan Power Supply Cable PC Internal Motherboard Fan Power Extension Cable Adapter Cord Wire for Computer ATX Case 4-Pin / 3-Pin Cooling Fans Cable (10.5 inch)

  • Excellent 4 pin PWM fan power supply extension cable for PC computer atx case internal motherboard fans, make you easier diy PC computer case..
  • Widely Compatible: support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans..
  • Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy..
  • Plug-n-Play, easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans..
  • Package contents: 4 pack black 10.5 inch fan power supply extension cables, male to female connector plug..
Check Stock

PWM Fan Hub Cable 2-Pack 4Pin Computer CPU Case Fan Splitter 5 Port 1 to 5 Fans for 3Pin Computer PC Case Fan 4Pin PWM Fan ITX Mining Rig Frame Case

  • ❤4 PIN INTERFACE: 4Pin motherboad power supply PWM cpu Fan splitter cable can extended 1pcs CPU fan port to 5pcs fan ports to solve the port shortage of computer pc case fans..
  • ❤ FAN EXTENSION CABLE: 3Pin 4Pin fan extension splitter cable can compatible with all 12V CPU fans and computer pc case fans extension..
  • ❤ BLACK NYLON BRAIDED: 12.99 inch 33 cm fan cable hub with black braided sleeve and tinned copper wire,lower resistance,stable and durable quality..
  • ❤STRONG DOUBLE SIDED ADHESIVE : Computer fan hub Comes with self-stick for easy installation..
Check Stock

CERRXIAN 4 Pin PWM Fan Hub Splitter Power Supply Cable 1 to 5 Way PC CPU Cooling Case Fan Power Extension Cable for ATX Computer Case 4-Pin & 3-Pin Cooling Fans(14.8inch)(2-Pack)

  • 4-PIN INTERFACE :4-pin PWM fan power supply splitter extension cable can extend 1 CPU fan port to 5 fan ports to solve the lack of pc case fans ports and reduce the load on the motherboard..
  • EASY TO INSTALL :Just insert the PWM chassis fan splitter cable into the motherboard, and then paste the other end to the chassis with double-sided tape. No need to drive..
  • CONNECTOR TYPE :1 TX4 4-pin Female, 1 TX4 4-pin Male for CPU fan (including Detect tach pin), and 4 TX4 4-pin Male for case fan.Compatible with all 12V 4 pin and 3 pin PC case fans..
  • NYLON BRAIDED CABLE :15-inch fan HUB cable with black braided sleeve and tinned copper wire, lower resistance, stable and durable quality..
  • NOTE ：Only 1 interface supports speed measurement because the motherboard does not support multiple interfaces at the same time.3-pin does not support temperature control..
Check Stock

2 Pack SATA to 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Power Cable

  • 15 pin SATA to 3 pin / 4 Pin 12V PC case fan power adapter cable.
  • Power 3pin or 4pin (PWM Connector) PC case fan with a 15pin SATA connector.
  • High density black sleeving cable, 10.6 inch length, cable is backwards compatible with standard 3-pin fans.
  • Fans will be operated at the fixed SATA voltage of 12V.
  • 2 Pack SATA to 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Power Cable.
Check Stock

Geekworm DC 5V 4007 40MM 4CM 40x40x7MM Cooling Fan for NVIDIA Jetson Nano Developer Kit and Jetson Nano Metal Case/T100 Case/T300 Case

  • Note: This cooling fan does not support PWM and speed feedback.
  • The NVIDIA Jetson Nano Developer Kit is not included in the packing list..
  • This 5V cooling fan supports to install in Geekworm NVIDIA Jetson Nano Metal Case (ASIN: B07RRRX121).
  • T300 Metal Case(ASIN: B07W7CNSR8), T100 Metal Case(ASIN: B07VYKRJQY).
  • This is an ultra-quiet cooling fan for NVIDIA Jetson Nano Developer Kit.
  • it with a 2.54 DuPont connector which is easy to insert. About how the install the fan, please refer to the photo..
Check Stock

Geekworm X820 Metal Case + Power Control Switch + Cooling Fan Compatible with Raspberry Pi 3B+/3B & X820 V3.0 SSD&HDD SATA Storage Board & X735/Rock64

  • Case Size(Installation): 11.3cm x 9.1cm x 6.2cm / 4.45inch x 3.58inch x 2.44inch.
  • Note: the Max. compatible thickness of the 2.5" SATA SSD/HDD is 10.4mm/0.41inch. (The stander 2.5" SATA SSD/HDD is 9.2mm/0.36inch)..
  • This is metal case with super mute cooling fan kit for X820 V3.0 SSD/HDD storage board user, very easy to install, perfectly compatible with Raspberry Pi 3 Model B+/3B/2B/B+/Rock64 & X820 V3.0 Board&X735 Board..
  • Note: Raspberry Pi, X820 board, SSD/HDD and power adapter is not included in the packing list..
  • Installation Video refer to Geekworm WiKi search X820.
  • Power switch with beatiful LED indicator to control the power of X820 V3.0 and the Raspberry pi.
  • Support super mute cooling fan, hundreds of round cooling holes on both side of the case, almost no weekeness for the bluetooth and WIFI signal..
Check Stock