Top Inch Fuel Line

KIPA 5/16\ Inch ID Fuel Line Set - 2 Meter / 6 Foot 5/16\ Inch Fuel Line + 4 Pcs 5/16 Inch Fuel Filters + 20 Pcs 2/5\ ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engines

  • ...old-resistant and ethanol tolerance, petroleum-resistant nitrile tube with a covering that resists weathering, ozone ,heat and can be used for ethanol-laced fuels and diesel fuel. This fuel hose is SAE 30R9-rated that will withstand up to 120 psi and 300 degrees..
  • Fitment: includes 6 Feet 5/16" Fuel Line.
  • 4Pcs x 1/4 Inch & 5/16 Inch Fuel Filters.
  • 20 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. They could be used widely for update your fuel line system, such as outboard boat system, motorcycles, ATVs, UTVs, Go Kart, Auto Vehicle's. Fuel line kit could also be used widely on lawnmower, Generator, power equipment and small engines Tool Etc..
  • Perfect fuel filters, They could effectively Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor & Fuel pump & Fuel Tank, transmiss Steady clean fuel flows and keep engines Running at the top performance...
  • Hose Clamps: They are Made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage, make your fuel line mounting all the safe..
  • Super Pressure rating and permeability. Each KIPA Fuel Line sections are strictly tested to ensure the durable safe and reliable use. K....
Check Stock

EVIL ENERGY 6AN PTFE E85 Fuel Line Hose Nylon Braided 10FT Black(5/16 Inch ID)

  • ID: 5/16". OD: 0.465inch.Length: 10 feet. Please measure before purchase!.
  • PTFE fuel line can be used as fuel injection hose, boost line,carb fuel line, ls engine swap fuel line, fuel return line, vapor return line,fuel supply line, etc..
  • Working Temperature Range: -76℉ to 446℉ (-60℃ to 230℃). Max Working Pressure: 3000 psi. Bursting Pressure: 10000psi..
  • Applicable Medium: all automotive fuels, lubricants, and coolants..
  • PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • ... the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect male, 1pc 6AN to 5/16" hose adapter fitting..
  • 5.Professional installation recommended: PTFE hose relatively hard, it can't be bend and folding in half. Nylon and stainless steel braid for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
Check Stock

EVIL ENERGY 8AN PTFE E85 Fuel Line Hose Nylon Braided 20FT Black(0.394 Inch ID)

  • ID: 13/32". OD: 0.543inch.Length: 20 feet(6M). Please measure before purchase!.
  • PTFE fuel line can be used as fuel injection hose, boost line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, fuel supply line, etc..
  • Working Temperature Range: -76℉ to 446℉ (-60℃ to 230℃). Max Working Pressure: 2500 psi. Bursting Pressure: 8000psi..
  • Applicable Medium: all automotive fuels, lubricants, and coolants..
  • PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • ...olished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We offer 3-month after-sale service for the 6an 3/8 fuel hose fittings kit. Any problem you have, contact us directly by amazon message. Please Noted: Professional installation and Adjustable AN Wrench is highly recommended.
Check Stock

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

  • 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
  • Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

IQIHUI 7PCS AC Fuel Line Disconnect Tool,AC Line Disconnect Kit,Transmission Oil Cooler Line Quick Disconnect Kit for Ford GM Mazda More Vehicles,Size1/4 5/16 3/8 1/2 5/8 3/4 7/8 Inch

  • 【Material】Fuel line quick disconnect heater hose disconnection tools are made of hard plastic to ensure strength and sturdiness..
  • 【Founction】Oil cooler pipeline quick disconnect kit, used to disassemble/disconnect fuel pipeline, heater pipeline, AC cooling pipeline and other quick disconnect fittings..
  • 【Application】The AC fuel line disconnect tool is compatible for most Ford, GM, Chrysler and Mazda models. It is also suitable for some other vehicles, and the automatic transmission line is within the size range..
  • 【Easy to use】The compact size is easy to grasp, and the inclined design allows access to hard-to-reach areas. Place the notch against the fuel line to release the lock and remove it..
  • 【Package】Transmission Line Removal Tool set contains 7 kinds of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
Check Stock

AloneGoer 1/4″ ID Fuel Line + 1/4″ In-Line Fuel Filters + 2/5″ ID Hose Clamps Clips Compatible with Kawasaki Kohler Small Engines ATV UTV Motorcycle Snowmoble

  • SIZE: 1/4″ ID = ID 6mm x OD 12mm Fuel Line.
  • APPLICATION: Transfer petroleum products fuel lines vapor emission lines and vacuum smog control..
  • ADVANTAGE: The Fuel Lines are oil resistant, cold-resistant and ethanol tolerance..
  • Replace fuel line of Kawasaki EZGO Polaris Snowmobile Lawn Mowers Tractors Bike Scooter ATV Golf Cart Motorcycle ect. Power Equipment.
  • Package include: 5 feet Fuel Line Tubing + 20x Clamps Clips + 6x fuel filter.
Check Stock

Five Oceans 3/8 Marine Fuel Line Yamaha Mercury Outboard Fuel Line Boat Fuel Line Hose EPA/CARB Replaces 22-13563A3 22-13563Q3 22-14213M 2214213Q 22-13563Q7 22-13563A7 22-13563A6 22-13563T7

  • COMPATIBILITY: Fuel line hose connector, female, with 3/8 Inch hose barb for use on Force 40 hp & larger (1993 & newer), 9.9/15/25 hp (1998), and all Mercury/Mariner outboards using clip-on type disconnect at engine end & 3/8 Inch I.D. fuel line. All Yamaha/Mercury Outboards and Mercury Fuel Tank Side - 1 End Replaces Original Mercury (OE) Part #: 22-13563A3, 22-13563Q3, 22-14213M, 2214213Q and 1 End Replaces Original Mercury (OE) Part #: 22-13563Q7, 22-13563A7, 22-13563A6, 22-13563T7.
  • PACKAGE INCLUDES: Fuel Line Assembly 3/8 Inch Hose 6 Feet Long, a Premium Primer Bulb, 2 Mercury Female Quick Connectors, and 2 Stainless Steel Hose Clamps.
  • MULTI-LAYER: Low-permeation Primer Bulb 3/8 Inch Hose that provides reliable and efficient priming to help start your boat engine.
  • FUEL COMPATIBILITY: Primarily used for fuel feed. Compatible with gasoline up to 85% ethanol-blended fuels, diesel, and all bio-diesel blends.
  • DURABLE MATERIAL: Engineered and designed with marine-grade material. This Fuel line is weather and UV Resistant. Meets USCG type B1-15 SAE J1527 and ABYC Accepted Standards. Reinforce Hose Approved by Environmental Protection Agency EPA and CARB regulations.
Check Stock

EVIL ENERGY 10AN Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE 10FT Black

  • Application: AN10 braided fuel line widely used as transmission cooler line, fuel return line, fuel supply line, coolant fluid hose, engine cooler line..
  • Nylon and stainless steel braided fuel line can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Inside Diameter: 9/16". Outside Diameter: 0.78inch. Length: 10 Feet. Please measure before purchase!.
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black

  • ▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
  • ▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
  • ▶Length: 20 Feet. Inner Diameter: 5/16" (8.71mm). Outside Diameter: 0.56inch (14.22mm). Please measure before purchase!.
  • ▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • ▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..
Check Stock

ARES 70024-3/8-Inch and 5/16-Inch Scissor Fuel Line Disconnect Tool - Easy Separation of Quick Disconnect Style Fittings - Use on Fuel, Heater, and A/C Line Service on Many Late Model Vehicles

  • ...ing mechanism inside the outer housing that goes over the lip of the fuel filter while the tool gets under the locking mechanism and releases the inner lip..
  • APPLICATIONS: This disconnect tool is necessary for Fuel, Heater, and A/C line service on many late model vehicles. Use it to release locking mechanisms on 3/8-inch and 5/16-inch fuel lines on 1989 and Newer GM, 1990 and Newer Ford, and some 1990 and Newer Mazda Vehicles..
  • TIPS: Relieve the pressure in the fuel line before disconnecting it, and remember to pull on the line after the spring (locking mechanism) has been released. Some Fords have “Blue Clipsâ€� (pictured in this listing) which can be released with a screwdriver, but you'll need this fuel line disconnect tool for the other side of the Ford fuel filter..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Scissor Fuel Line Disconnect Tool, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the fami....
Check Stock