Top Industrial Servo Controller

Juki LU-1508NS Industrial Walking Foot Sewing Machine, Vertical Axis Hook, Servo Motor

• ✅The Juki DDL-8700 is a single-needle, straight stitch, industrial sewing machine. Manufactured by Juki, a world leader in sewing quality and technology, this machine is perfect for sewing light to medium weight fabrics (not intended for leather or other heavy materials)..
• ✅Included accessories in the machine DDL-8700 head: : Bobbin Winder ___Thread Stand ___Machine Oil ___ Instruction Manual ___ Oil Pan ___Knee Lifter ___V Belt.
• ✅Juki DDL-8700 Single Needle Lockstitch Industrial Sewing Machine ( NOT a walking foot).
• ✅Up to 4500 stitches per minute Identical to and replaces DDL-8500 models Replaces popular DDL-MS and DDL-888 models, but has more speed Single-needle Lockstitch Maximum foot lift: 13 mm Maximum stitch length: 5 mm Maximum stitches: 6 stitches per inch. Needles: 9-18 DBX1 (16x231) up to size 19 Sewing Speed max.: 5,500 spm Stitch Length max.: 5 mm Presser Foot Lift by hand, max.: 5.5 mm.
• by knee, max. 13 mm Needle Bar Stroke 30.7 mm Hook: auto-lubricating full rotary hook Industrial Sewing Machi.
• ✅It comes complete with sewing machine table and Electronic DC Servo Motor 3/4 H.P, 1 PHASE, 110 VOLT, 0 ~3300 RPM,(drawer, belt, tools, led lamp and instruction manual PDF format ) brand new ✅ Includes: Thread Stand Bobbin Winder O....

MMOBIEL Micro Servo Motor Kit MG995 55g 360° for RC Drone / Car / Airplane / Helicopter / Vehicles / Robots / Compatible with Arduino Projects and Raspberry Pi Incl. Screws and 4 Servo Arms

• ... Parts Available and Put Together with Care. to give You the Best Experience in Controlling Your Remote Controlled Vehicle. Interface Type: Compatible with JR & FUTABA interface..
• Servo Motor Specs: No Load Running Speed: 0.09±0.01 sec/60° Degree at 4.8V.
• Stall Torque (4.8V): 152,76 oz/inch / 11kg/cm, Type: Analog Controller, Operating Voltage: 4.8V - 6.0V, Left & Right travelling Angle deviation: ≤ 6° Degree, Centering deviation:≤ 1° Degree, Maximal Angle 120° Degree Neutral position: 1500 μsec, Dead band width:7 μsec (microsecond), Rotating direction: Counter Clockwise (900→2100μsec), Pulse width range: 900→2100 μsec, Operating Temperature Range: 0℃～55℃elcius.
• Compatibility: Compatible with Remote Control Drones, Helicopters, Cars, Boats, and all sorts of RC Toys and hobby projects. Can also be used with any type of Arduino project, Raspberry Pi, Futaba, JR, Sanwa and Hitec remote system..
• Set Contains: 1x MG995 Micro Servo Motor 55G, 1x 3 Colored Cable (Brown / Yellow / Red) with a Futaba Connector Plug, 4x Servo Horn Steering Arms (Star, Arm, X, Wheel), 4x Stainless Steel Screws..
• High quality product by MMOBIEL: Each part is tested before shipment. Item in Stock..

Robotic xArm 6DOF Full Metal Programmable Arm with Feedback of Servo Parameter Wireless/Wired Mouse Control Mobile Phone Programming

• Robotic controller uses ARM core CPU, built-in Bluetooth,16M storage memory,single action group can hold 510 action. Better experience programming....
• Support wireless handle and free Android/iOS APP.
• Uses serial bus servo motor with feedback of angle, temperature and voltage, motor shaft lock protection, the LX-15D serial servo have extra long life.
• Simple wiring design， plug and play Suction cup design.

ALMOCN 8PCS SG90 9G Micro Servo Motor Kit Mini for RC Robot Arm Helicopter Airplane Car Boat Controls Project

• Application Fields: remote control helicopters, micro robot, robot arm and boats. ALL kind of R/C Toys and Arduino project..
• Stall Torque (4.8V): 17.5oz /in (1kg/cm).
• Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Maximum....
• Amplifier Type: Analog controller. Operating Voltage: 4.8V～6.0V.
• NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW....

Flysky FS-GT3C 2.4GHz 3-Channel 3CH Surface Radio R/C RC Car/Boat Transmitter TX

• FLYSKY GT3C Radio Controller and Receiver is designed for most of popular rc cars, rc truck, and rc boat, it will work with digital servo, and analog servos..
• 2.4G Radio Controller Radio Transmitter & GR3E Receiver.
• Comes with a rechargeable battery a USB charge cable..

MACH3 Controller USB MACH3 100Khz Motion Controller Card Breakout Board Controller Card for CNC Engraving Servo Motor Stepper Motor Servo motor

• 【Functions】The function of this motion control card includes that it supports automatic probe tool, emergency input, limit switch, and supports....
• 【4-axis Linkage】Usb interface board supports for 4-axis linkage, you can connect four stepper motor drives or servo drives. 4 general-purpose....
• 【Wide Use】The maximum step-pulse frequency of motion control card is100KHz, which is very suitable for CNC Engraving, Servo Motor, Stepper Motor....
• 【Advantage】The motion controller needs using external 24V DC power to isolate USB and external port, and to make the system more stable. And it....
• 【Drive Output Interface】The 4 general-purpose isolated relay drive output interface can drive four relays for controlling the spindle starts,....

Celestron Focus Motor for SCT and EdgeHD, Black, 94155

Celestron CGX Computerized German Equatorial Mount and Tripod

HOBBYMATE Flysky RC FS-GT3C Remote Controller Radio Controller 3 Channel Radio Transmitter & FS-GR3E Failsafe Receiver - for Rc Car Rc Truck Rc Boat

• FLYSKY GT3C Radio Controller and Receiver is designed for most of popular rc cars, rc truck, and rc boat, it will work with digital servo, and analog....
• 2.4G Radio Controller Radio Transmitter & GR3E Receiver.
• Comes with a rechargeable battery a USB charge cable..

WEISHUJI 25T Servo Horn Steering Arm, Servo Horn 25T Steering Arm, Aluminum 25T Servo Horn Steering Arm for Traxxas TRX4 Axial SCX10 Tamiya 1/10 RC Crawler Truck (Red-Black)

• 25T Servo Horn Steering Arm fits for Traxxas TRX4 Axial SCX10, SCX10 ii 90046 1:10 scale rc crawler, and Servo Horn 25T Steering Arm is CNC machined..
• 25T Servo Horn Steering Arm has 18mm and 22mm threaded mounting holes for adjustability, and Servo Horn 25T Steering Arm is of high quality..
• 25T Servo Horn Steering Arm is Red-Black, and Aluminum 25T Servo Horn Steering Arm is of small size and lightweight..
• 25T Servo Horn Steering Arm works on Futaba, Savox, Emax, HSP, Power HD, Xcore, Aluminum 25T Servo Horn Steering Arm works on other popular prand servos motor (Except Hitec and JR Servos)..
• Package of 25T Servo Horn Steering Arm includes: 1 x 25T Servo Arm (Red-Black), Servo Horn 25T Steering Arm, Aluminum 25T Servo Horn Steering Arm.

Havcybin HOTRC CT-600 RC Transmitter and Receiver 6 Channel 2.4ghz Hand Controlled RC Car Boat Tanks Remote Controller (Transmitter and Receiver)

• 【One-handed Controller for Beginners】this rc controller and receiver kit designed with Ergonomic pistol-grip and steering wheel, which let the beginners can control the car or boat within limited speed rang, With throttle speed limit adjustment, brake and fail safe, out of control protection function.Creative Integrated design One-handed Controller..
• 【2.4Ghz Stable Signal】2.4GHz 6CH remote controller with CT-600 receiver are perfect used for RC Car Boat Tank models. 2.4GHz Frequency and 3ms Receiver responses. Stable control your model 400-500M, make good works and protect when it out of control..
• 【Powerful 6Channel】This RC receiver with 6CH can be set to runaway protection, 1-2CH can be set to mix control mode, 3-4CH can control Servo, 5-6CH can control light. fine-tuning button can be set to lock..
• 【High Quality】The RC transmitter and receiver with standard sponge wheel, exquisite electroplating of the hand wheel, high-grade PVC panel, every detail is finely processed. Comfortable silicone strips on both sides, exquisite leather pattern design, comfortable hand feel, not easy to sweat..
• 【Buy with confidence】the package contnet 1 x CT-600 Remote Controller, 1 x CT-600 4+2channel Receiver, 1 x User Manual, 1 Year Warranty. If you have....

WEISHUJI 10PCS 25T Aluminum Servo Horns Arms, M3 Threads Metal Steering Arm for Towerpro, HSP, HD power, Futaba, Axial, Savox, Xcore, Standard Servos Motors, MG995 MG996R MG946R, S3003 etc servo (Red)

• 25T Aluminum Servo Horns Arms are suitable for mostly 25T Standard Servo Motor, and M3 Threads Metal Steering Arm is compatible with Towerpro HSP HD power Futaba Axial Savox Xcore Standard Servos Motors MG995 MG996R MG946R S3003 etc servo..
• 25T Aluminum Servo Horns Arms are made of strong aluminum, 25T Aluminum Servo Horns M3 Threads are hard to break..
• 25T Aluminum Servo Horns Arms are of dimension 35x15x6mm, and Metal Steering Arm behaves very well on your RC models..
• 25T Aluminum Servo Horns Arms are djustable type servo arm, and M3 Threads Metal Steering Arm have two steel bolts to secure the split-clamp onto the servo output..
• Package of 25T Aluminum Servo Horns Arms include: 10 x 25T Aluminum Servo Horn-Red, M3 Threads Metal Steering Arm, 25T Aluminum Servo Horns M3 Threads some hardware.