Top Input Voltage Range

Onyehn 2pcs LTC1871 DC-DC Boost Step-up Voltage Converter Module 100W High Power Adjustable Output 3.5-35V Power Regulator Board with LED Voltage Meter

  • No user/operator instructions or data sheets.Find the download data by yourself, please make sure you consider whether you know the operation before buying. Size: 68x42x14mm, LTC1871 IC with External MOSFET..
  • Conversion Efficiency: Up to 96%. Low input voltage or a large difference between input and output voltage will degrade the current capacity and efficiency..
  • Boost voltage to a stable regulated output. Useful for a wide range of applications, such as powering 5V USB devices from a 3.7V lithium cell, powering higher powered electronics from a 12V battery, and a wide range of automotive and electronic projects. Constant voltage regulation, not for raw LEDs..
  • Button to switch measurement of the input or output voltage, and LED indicates the current measurement of the input or output voltage.
  • The nixie tube can be turned off by another button. Mentioned states are able to be memorized, is not lost even if the power is disconnected. (On-board marked "IN" LED is turned on, the nixie tube display input voltage value, "OUT" LED bright display is the output voltage value)..
  • Output voltage must be greater than input voltage, do not apply reverse polarity voltage, voltmeter works only when input is >= 4V..
Check Stock

High Voltage DC-DC Boost Converter 8V-32V to 45V-390V Adjustable ZVS Capacitor Charging Power Supply Module

  • Input voltage: two input voltage range selectable, (jumper selectable through the back of the PCB, default setting 10-32V input): 1) 8V-16V input 2) 10V-32V input.
  • Output voltage: 45-390V continuously adjustable (the default output 50V. This module has regulator function, after adjusted output voltage is stable and unchanging, not with changes in input voltage changes).
  • Output Current: 0.2A MAX (affected by input voltage and dropout voltage,the higher the output voltage, the smaller the output current).
Check Stock

Juried Engineering LM2903P LM2903 Dual Differential Comparator Automotive Grade Breadboard-Friendly IC DIP-8 (1 Piece)

  • The LM2903P devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
  • Single-supply or dual supplies Wide range of supply voltage Maximum rating: 2 V to 36 V.
  • Low supply-current independent of supply voltage: 200 µA per comparator, Output compatible with TTL, MOS, and CMOS.
  • Common-mode input voltage range Includes Ground, Low output saturation voltage.
  • Differential input voltage range equal to maximum-rated supply voltage: ±36 V.
Check Stock

Aideepen 1200W 20A DC Converter Boost Car Step-up Power Supply Module Adjustable Voltage Converter 8-60V to 12-83V

  • 【Features】Input overcurrent protection.
  • 【DIY projects】It adopts 7 electrolytic capacitors and a 33MM high-power iron-silicon-aluminum magnetic ring to prevent over-temperature magnetic saturation under high current conditions. Use a piece of aluminum radiator on the back to dissipate heat ，Reserve fan mounting holes, suitable for more DIY projects..
  • 【Adjustable Voltage 】1200W 20A DC converter boost Input voltage range is DC 10-60V, Output voltage range is DC 12-80V.can be arbitrary adjustable.
  • Input current: 0.5-20A (MAX),Max output power is 1200W.(exceeds 15A, please add fan cooling）.
  • 【Output Power】Input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W，input 60V * 20A = 1200W Note: Do not use the short-circuit output method to adjust the current. It is recommended to use a smaller adjustment range..
  • 【Widely Application】can be used for high power solar street lamp driving, various LED lighting CV driving, vehicle-mounted and mobile device power, DIY adjustable CV CC power, solar power charging, and various batteries charging..
Check Stock

High Speed Comparator High Speed Frequency Meter Front Shaping Comparator for Low-Voltage Applications Conversion Circuit

  • LOW VOLTAGE APPLICATIONS -- The input common mode range is better than the swing input, which is very suitable for low voltage applications..
  • APPLICATION -- Digital module can be used for wide voltage range and periodic signal shaping..
  • FRONT END ADJUSTMENT -- Used as a front end conditioning module in time domain measurements for frequency and phase difference..
  • PARAMETER -- The input voltage is 10 to 1000mV, the input frequency is about 200MHz DC, and the input impedance is 50 ohms..
  • RAIL TO RAIL OUTPUT -- The output level mode is rail to rail output, which can directly drive TTL / CMOS level..
Check Stock

ACEIRMC 3pcs 20A 300W CC CV Step Down Module Adjustable DC 6-40V to 1.2-36V Voltage Regulator Buck Converter Constant Current Power Supply Module

  • Aceirmc buck converter input voltage range is DC 6-40V, adjustable output voltage range is DC 1.2-36V, can be used to convert 24v to 12v 5v, adjustable output current range is 0-20A, max output power is 300W. The step down regulator can apply to constant output current..
  • With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current. The efficiency can be up to 95%,(measured at 20A, converting 24V to 12V)..
  • Short Circuit Protection: Self-recovery(cannot short circuit for long time). Plus, when input and output is common grounded, no-load CV output constant voltage,CC output constant current.
  • Adopting 75V / 80A large current dual MOS tube designed step-down board, Input and output use high frequency low resistance electrolytic capacitor, low ripple, and gives a stable output. Large current 30A connection screw terminals, more convenient to install.
  • Application: DIY stabilized voltage supply, LED car display, mobile power, industrial equipment appliances, LED driver, monitor, solar energy, fans, photovoltaic energy, motor, etc....
Check Stock

Valefod DC to DC High Efficiency Voltage Converter 24V to 12V 40A 480W Buck Converter DIY Power Supply Step-Down Transformer

  • 【High-grade DC-DC Buck Converter】It adopts premium quality electronic components and waterproof (IP68) aluminum housing. Widely used for golf cart, club car, motor, speaker, GPS, car display screen, LED strip light, air-conditioner, electric fan, solar energy, DVD and other devices that requires DC 12V voltage..
  • 【Input Voltage】 DC 24V (Input Range: 18V to 36V). A stable DC power is recommended as the input power supply, and the rated voltage supply should be within the voltage range of 18V to 36V..
  • 【Output Voltage】DC 12V (Output Current: 40A). Please NOTE the output voltage/current/power is rated..
  • 【Multiple Protections】Built-in over-temperature, over-current, over-voltage, output short- circuit protection to ensure your devices safely..
  • 【Easy to DIY】Connect INPUT wires to power source, OUTPUT wires to your load device. The wiring diagram is labeled on the back of buck converter. Please don't power on before completing the circuit and connection, do not reverse the input and output interface. ※ Two INPUT wires = Red wire(positive pole) + Black wire(negative pole). ※ Two OUTPUT wires = White wire(positive pole) + Black wire(negative pole)..
Check Stock

ARCELI Boost Buck Converter,Communication Constant DC - DC Voltage Current Step-Down Power Supply Module Buck Voltage Converter Voltmeter 50V 5ADPS5005+USB+BT

  • buck voltage converter input voltage range DC 6-55V, output voltage range 0-50V, output current range 0-5A, output power range 0-250W, output voltage resolution 0.01V, output current resolution: 0.001A..
  • Wireless & Wire Connection: it can connect with computer by Bluetooth, in the distance range of 5 meters.
  • or can connect by the USB communication board. User can remote monitor, voltage setting and current setting can be operated quickly..
  • Quick Operation: it is easy to operate converter with this, you can do voltage setting and current setting as quickly as possible.
  • you can also set it to cut off output when over voltage, over current and over power..
  • LCD Display: Built with color LCD display, it will be convenient for you to review preset voltage, input voltage, output voltage, preset current, output current, output power and brightness of LCD..
  • Package Including: 1x DC adjustable constant voltage power supply converter.
Check Stock

EC Buying AD620 High Accuracy Low Power Programmable Instrumentation Amplifier Module Voltage Amplifier Module Differential Amplifier Single-Ended/Differential Small Signal/Small Amplifiers Module

  • ♥Introduction: The AD620 is a low-cost, high-accuracy instrumentation amplifier that requires only one external resistor to set the gain over a gain range of 1 to 10,000. Ideal for portable (or remote) applications. With high accuracy, low offset voltage, and low offset drift, the AD620 is ideal for precision data acquisition systems such as electronic scales and sensor interfaces. Also features low noise, low input bias current, and low power consumption. The module has a fixed voltage output..
  • ♥Basic Features: ✭Module Name AD620 Instrument Programmable Amplifier ✭Module size:50mm * 50mm ✭Module power supply: 5V-24V ✭Module input signal type: single-ended signal or differential signal ✭Module signal input and output range: the input signal range is within 100 microvolts of the power supply, and the output signal range is within the power supply ✭Module bandwidth: AD620: 120KHz (G=100), AD623: 800KHz (G=1), AD620/623 is lower than 50KHz at high gain, and higher than 1MHz at low gain.
  • ♥ Other Features: ✭Module gain: When there is no solder slip, the AD620 will zoom by 10 times by default, and the AD623 will zoom by 20 times by default. During welding slip, AD620: G=1+50K/Rg, AD623: G=1+100K/Rg ✭Maximum magnification of the module: ....
Check Stock

DS18 3AVS 14.4V Car Audio Stabilizer Constant Steady Output Voltage

  • DS18 3 amp Volt stabilizer - input any voltage between 6-16v and get steady output at 14.4V..
  • Wide voltage input, steady output voltage @ 14.4V..
  • Strong performance, high reliability, & best preset voltage.
  • Input voltage range: 6-16v. Output voltage: constant 14.4V..
  • Voltage stabilized accuracy: 003c 0.5%. Ripple factor: 003c 0.1%. transfer efficiency: 003e 85%..
Check Stock

UMLIFE 4PCS AC/DC to DC Step Down Buck Converter AC 5-30V DC 5-48V 24V 36V 48V to DC 2.5-35V 12V Voltage Regulator Board 2A Adjustable Volt Power Supply Module

  • 4PCS LM2596HV AC/DC to DC Buck Step Down Converter Module 3v 3.3V 5V 6V 9V 12V 15V 24V DC 5V-50V Adjustable Step-Down 3A Power Supply.
  • Adjustable AC/DC to DC buck converter power supply module Voltage Regulator.
  • Input ac voltage AC5V~AC30V or dc5v-50v. Due to the large fluctuation of ac voltage, the recommended ac voltage range has been reserved..
  • The power module adopts plug-in LM2596HV, LM2596 version of high voltage, the highest input voltage is 50V(limited by filter capacitor voltage) with external radiator, can withstand high current work..
  • Input voltage range: AC 5V-30V, DC 5V-50V Output output range: DC 3.3V-33V.
Check Stock

Bridgold 10pcs LM339 339 Quad Differential Comparator ICS for High Voltage Digital Logic Gate Circuit, DIP14

  • Wide common mode input voltage range, Vic=0～Vcc-1.5V.
  • Input offset voltage is small, VIO=±2mV.
  • The differential input voltage range is very large, even equal to vcc.
  • The output is compatible with TTL, DTL, MOS, CMOS, etc..
Check Stock