Top Ir Repeater Cable

ENSIGEAR IR Repeater Kit, ir repeater system，IR Remote Control Extender Remote ，Control 1 to 18Devices.IR Extender 100 Feet，20KHz-60KHz Dual Sensors Mini Receiver,Super compatibility

  • 1）With Most IR Remote Controls. Tested to work with Amplifier, Cable Box, Stereo Receiver, Game Console, Satellite TV receiver, CD/DVD Player, Blu-Ray Player and other streamers as well as most A/V devices..
  • 2）This 1x6 IR Repeater system makes it possible to control multiple IR devices while these are in a closed cupboard or in a remote location out of sight. This IR Block also features an Ethernet (CAT5 or higher) input on a terminal block connector for applications where the IR receiver needs to be further up to 120 meters away. To use Ethernet extension, an extra terminal block , sold separately, will also be required that the IR receiver will then plug into..
  • 3） Connection without having to install the software, simple and convenient for you to achieve Remote Control. This product allows you to control A/V equipment with your existing IR remote controller..
  • 4）Use Double IR Emitter x 6pcs，expandable up to 12.Use Triple IR Emitter x 6pcs，expandable up to 18. .Home theater devices kept in a closed cabinet or in another room with this IR Infrared Remote Control Extender Repeater System. Additional IR Emitters sold separately . It is compatible with almost all the IR electronic appliances in the market with its wide frequency range ....
Check Stock

TNP IR Infrared Remote Control Extender Repeater Cable (8.2 Feet) - IR Signal Receiver & IR Emitter Blaster Extension Cable Wire Cord USB Powered System Kit

  • IR remote control cable extends the signal to a video source like a Blu-ray player, DVD player, STB box, AV receiver or other A/V source with an infrared sensor so it can be controlled from your HDTV.
  • Simple installation IR Repeater cable allows you to control home theater components located behind closet cabinet doors.
  • Place the IR emitter blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger power supply (sold separately).
  • Compatible with most A/V equipment with infrared sensors (not RF).
Check Stock

OBVIS IR Infrared Remote Control Extender Repeater Cable (10 Feet) - IR Signal Receiver & IR Emitter Blaster Extension Cable Wire Cord USB Powered System Kit - Black

  • This Infrared Repeater Cable applies to all remote control devices from 38 to 56 khz.
  • IR Repeater Extension controls Audio Video Components in Entertainment Cabinets or Equipment Closets using Existing IR Remote Controls.
  • Come with adhesive backing sticks directly onto different devices.
  • 1 Receiver, 1 Emitter, Connects to USB port on TV or home theater device for power.
Check Stock

CMPLE - IR Emitter Extender Mini Stick-On Infrared Emitters Blink Eye, Remote Control Extension Cable 3.5mm 10 Feet

  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Two emitters on a single plug,Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Dual Heads allow you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers..
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
Check Stock

SZBJ IR Repeater, IR Remote Repeater, Infrared Remote Control Extender Kit

  • Upgraded repeater: SZBJ ir repeater kit is compatible with ALL IR controlled devices and all other brands of components.
  • Devices control : you can control up to 8 infrared devices (Expandable to 12 devices) from one location with the included IR Receiver (Expandable to 3 receivers). Extra Receivers and transmitters sold separately in our store ..
  • Out of sight : SZBJ ir remote repeater allows you to place any IR controlled devices out of sight (hidden behind doors or in other rooms)of the remote control and still be able to control it..
  • High sensitivity : Real time transmission of the infrared remote signal without any delay with the high sensitivity sensor..
  • Warranty&support : 100% free replacement for any manufacturing defects, and 100% money refund for any unsatisfaction within 30 days. Contact us any time for any problem!.
Check Stock

IR Infrared Emitter Extension Cable 1.5m Long 45 Degree Emission Angle 3.5mm Jack Single Red Head 5pcs

  • ... etc. (not compatible with Yamaha RX-V677)).
  • ★ 10FT CABLE – 10 feet long cable with 3.5mm plug allows you to extend the infrared signal into 49.21ft, horizontal half angle 45 degrees, self-adhesive backing let you paste on wall and remote control all devices with a IR range of 38-56kHz..
  • ★ CLEAN LOOK – Our IR Repeater system cable is ideal for those who want to conceal their A/V component equipment inside a closet or cabinet for a clean, stylish look. Epoxy resin packaging type and shell can filter visual interference..
  • ★ FLEXIBLE+ RISK-FREE PURCHASE – You can now control your home theater, cable boxes, etc. from behind thecabinet, closet or even the other room. If for any reason, you are not 100% satisfied with the product, you can send it back to us, and we will refund your money!.
Check Stock

SZBJ IR Emitter Extender Cable Extension 3.2 Feet - Dual Head 3.5mm Infrared Red Transmitter Pure Copper Wire Cord Compatible with IR Repeater Extender System Kit Xbox One 2 IR Emitter

  • Passes IR communication: Used with an IR Repeater kit or other electronics has emitter output to control a device.Adhesive backing allows the emitter....
  • 3.2 ft overall length of Infrared Emitter cable between the emitter heads and the mini-plug, extend remote control ability to any room any where in....
  • Control A/V component by the existing IR controller: such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD....
  • Easy to use : Sticks directly onto the AV equipment, and quad Heads allow you to control multiple pieces of equipment with only one IR output..
  • Plug into IR OUT port for use with IR extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers..
Check Stock

TNP IR Emitter Extender Extension Cable 10 Feet - 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit Xbox One 1 IR Eye Emitter

  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Quad Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with IR extender extension system, Xbox One, IR....
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD....
Check Stock

TNP IR Emitter Extender Extension Cable (10 Feet) - Quad 4 Head 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One

  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Quad Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with IR extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
Check Stock

IR Emitter Remote Control Extender Cable, 4 Heads 3.5mm Plug Infrared Red Transmitter Blaster Blink Eye IR Extending Cable for IR Repeater/TV/DVD/Bluray Player/Xbox One (4 Heads, 10FT)

  • PASSES IR communication: used with an IR repeater kit to control a device.
  •  Remote control ability to stretch to any room in the house.
  •  Self-adhesive back allows the spotlights to be attached to the IR eye by a device.
  • Quad heads allow you to control over several pieces of devices with only one IR output.
  •  For use with IR extender extension system, Xbox One, IR connector blocks and home automation controller.
  • The mini stick-on emitter includes a 10 m cable between the emitter heads and the mini-plug.
  • Can you through the existing IR controller, control A / V components such as amplifier, cable box, HD DVR, stereo receiver, SAT TV receiver, CD player, DVD player, BluRay player or other components By IR signal.
Check Stock

SZBJ IR Repeater, IR Remote Repeater, Infrared Remote Control Extender Kit (IR Repeater kit 3 New)

  • Upgraded repeater: SZBJ ir repeater kit is compatible with ALL IR controlled devices and all other brands of components such as: Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more..
  • Devices control : you can control up to 8 infrared devices (Expandable to 12 devices) from one location with the included IR Receiver (Expandable to 3 receivers). Extra Receivers and transmitters sold separately in our store ..
  • Out of sight : SZBJ ir remote repeater allows you to place any IR controlled devices out of sight (hidden behind doors or in other rooms)of the remote control and still be able to control it..
  • High sensitivity : Real time transmission of the infrared remote signal without any delay with the high sensitivity sensor..
  • Warranty&support : 100% free replacement for any manufacturing defects, and 100% money refund for any unsatisfaction within 30 days. Contact us any time for any problem!.
Check Stock

IR Extender Infrared Remote Control Repeater Emitter Stick-On Mini Receiver Transmitter IR Blaster Extension Cable for TV/DVD/DVR/CD Player/Bluray Player (Single Heads, 10FT Long)

  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal. NOTE: Your device must have 'IR' port so the product could work!.
  • Passes IR communication: Used with an IR Repeater kit to remote control a device, extending remote control ability to any room in the house. NOTE: Your device must have 'IR' port so the product could work!.
  • Two emitters on a single plug, adhesive backing allows the emitter to be easily attached to the IR eye of your device..
  • Multiple heads optional allows you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers..
  • The mini stick-on infrared emitter includes a 10 ft cable between the emitter heads and the mini-plug, easily meet your expectation of extending..
Check Stock