Top Isy994i Z Wave

HomeSeer HS-DS100+ Z-Wave Plus Door/Window Sensor

  • 3 in 1 Zwave Sensor: Door and window sensor, temperature sensor and humidity sensor 3 in 1. Protect your home by detecting accidental opening/closing of doors, windows, cabinets and drawers. Check the battery level of the device, temperature and humidity through the app..
  • Safe and Reliable: Built-in Z-Wave 700 series, Z-Wave Plus V2, faster wireless speed, longer battery life and longer range than Z-Wave 500 series. SmartStart included, with standard S2 security features, is not only easy to install (auto-recognition via a quick scan of a QR code), but also secure..
  • Long-Life Battery: This smart sensor is powered by a CR2450 battery (battery included, no need to bring your own). The lifespan is 3 years. The sensor’s power saving mode extends battery life compared to other sensors..
  • Customized Events: Personalize how your Z-Wave devices talk to each other: when the front door is opened in the evening, automatically turn on the welcome lights. When a backdoor is opened unexpectedly, trigger a Z-Wave alarm siren..
  • Z-Wave Hub Compatibility: This z-wave door sensor works with certified Z-Wave gateways, Fibaro, SmartThings, Vera..
Check Stock

Zooz Z-Wave Plus Power Switch ZEN15 for 110V AC Units, Sump Pumps, Humidifiers, and More

  • POWERFUL PLUG: The only Z-Wave Plug that lets you safely control and monitor heavy-duty 110V appliances from your Z-Wave smart home system. Connect your refrigerator, humidifier or dehumidifier, AC unit, fan, sump pump, or a gas clothes dryer to Z-Wave. NEW: 45 degree angled plug so you can fit 2 Smart Switches in a single receptacle!.
  • POWERFUL Z-WAVE: With built-in Z-Wave Plus signal repeater and range test tool, the Power Switch will boost your whole Z-Wave network while keeping it protected with AES signal encryption..
  • POWERFUL CONTROL: Monitor energy use of connected appliances in live mode or over time with W, kWh, A, and V reports (your Z-Wave hub needs to support this feature). NOTE: It is NOT a power outage monitor! Quick status reports to the controller and on/off state recovery after power failure..
  • POWERFUL HARDWARE: Made from high-quality components that will last, even when it's very cold or very hot (14 - 104F, indoor use only). ETL certified: complies with North American electrical safety standards. Extra-thick flexible cord is perfect for installations with no immediate access to a receptacle..
  • COMPATIBILITY: Use the Power Switch with any certified Z-Wave gateway for simple on/off control (Wink, Z-Wave alarm panels). Advanced settings and....
Check Stock

Optex TD-20U Indoor/Outdoor Wireless Infrared Transmitter

  • Works with Windows / Mac / Linux / Raspberry Pi 4 (2020 upgrade) to create a zwave hub for control of Z-Wave plus and Zwave devices, Tiny but powerful.
  • 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices. package: 1x Z-Stick Gen5, 1x Manual, the others are not included.
  • Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.
  • Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included.
  • Z-Wave Plus certified. Certification number: ZC10-15060006.
Check Stock

EATON RF9640-NDW Z-Wave Plus Universal Dimmer, White

  • Compatible Z-Wave controller/hub required.
  • Z-Wave Plus devices can be controlled through voice assistants such as Amazon Alexa or Google Home when used with compatible Z-Wave controller/hub.
  • Compatible with Z-Wave Plus accessory dimmer (RF9642-Z) for wireless 3-way control, eliminating the need for traditional 3-way wiring or dedicated traveler wire.
  • Can be associated with up to 5 other Z-Wave Plus devices.
  • Dimmable seven step blue LED display alongside push pad indicates selected light level - even in full daylight (coordinates light level status with associated dimmer accessory).
Check Stock

Aeotec Z-Stick Gen5 Plus Z-Wave Plus USB to Create Your Own Z-Wave Hub SmartStart and S2 Enabled Works with Raspberry Pi 4 Compatible with SmartThings HomeSeer and Others

  • Works with Raspberry Pi, Windows, Mac, Linux to create a z wave hub for control of Z-Wave and Z-Wave Plus devices.
  • Easier device setup than standard Z-Stick Gen5. Now supports SmartStart device installation when used with compatible software connect Z-Wave devices....
  • More secure than standard Z-Stick Gen5. Upgraded to offer Z-Wave Security 2 (S2) encryption, this Plus edition of Z-Stick is enhanced with AES 128-bit....
  • Faster than standard Z-Stick Gen5. Plus edition offers a 50% speed performance when communicating securely vs. non Plus edition. And can be used to....
  • Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included.....
Check Stock

Minoston Z-Wave Plug 700 Plug-in Outlet Built-in Repeater Range Extender, Z-Wave Hub Required, Alexa and Google Assistant Compatible(MP31Z)

  • This Z-Wave plug is compatible with those Z-Wave hub: SmartThings, Vera, Wink, Fibaro, Homeseer, Ring, Honeywell, 2GIG, Hubitat(change device type). ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS！Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • Z-Wave plug in outlet is 15A Max Loading for using with most of home lighting devices and home appliances..
  • Timer schedule: Control lights to come on or turn off via a schedule at certain times of the day to reduce your electricity bill, set up custom scenes with other devices enrich intelligent life..
  • Z-Wave 700 series chip for Smart Start and for most of Z-Wave hubs..
  • Easy to Setup: No wiring required. Simply plug in the device to a wall outlet and connect to your hub for convenient smart outlet features..
Check Stock

Minoston Z-Wave Outdoor Dimmer Plug, Outdoor Smart Outlet Switch, Z-Wave Hub Required, Weatherproof, Built-in Repeater, Work with SmartThings, Wink, Alexa, Black(MP22ZD)

  • This Z-Wave outdoor dimmer plug compatible with those Z-Wave hub: SmartThings, Vera, Wink, Fibaro, Homeseer, Ring, Honeywell, 2GIG, Hubitat(change device type). ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS！Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • 0-100% Dimming and Voice Control: This Z-Wave outdoor dimmer for string lights can adjust the light brightness from 0-100% by voice commands. Just say:“Hey Alexa, set the led strip lights to 75%”..
  • Ideal for Outdoor: IP65 weatherproof housing. Ideal for Garden, Backyard, Kitchen, Bathroom, Porch, Balcony, Garage, Basement, Patio or Electric grill, Sprinkler, Washing machine, Christmas tree, landscape lighting, fountains, lamps, pumps, and other outdoor or indoor-use electric appliances..
  • Schedule and Timer: You can set automatic daily timers or create on/off routing so that the Z-Wave plug can turn on and off automatically. And saving energy when the plugged-in appliances are not needed or are left on by accident..
  • 400W Max Power Z-Wave Dimmer Plug: The Z-Wave plug-in smart dimmer plug works with dimmable string lights in LED, INC bulb. Please make sure your string lights are dimmable and the total power is less than 400W. 150W Max for....
Check Stock

Aeotec Siren 6, Z-Wave Plus S2 Enabled Zwave Siren Safety Speaker, Wall-Mounted Sound & Light Security Intruder Zwave Alarm with Backup Battery, 110dB

  • Aeotec Zwave Siren 6 is your home smart indoor siren. Built with Z-Wave Plus S2 to be a smart home security siren, it features a 110dB speaker coupled with 1,000 lumens visual light alert strobe. Can be used as siren for security alarm, smoke sensor, and CO sensors via Z-Wave.
  • Pre-loaded 6 security sounds, 8 safety sounds, and 30 tones in total. Each tone is volume adjustable between 80dB and 110dB.
  • 4-hour backup battery lets Siren 6 work even when power is turned off.
  • Can also be used as doorbell by pairing with Aeotec Button. Can use up to 3 zwave buttons, each sold separately.
  • 5-Compatible with certified Z-Wave gateways including: Samsung SmartThings, HomeSeer, Open Z-Wave, Zipabox and more(Not compatible with Vera). Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-19046417..
Check Stock

2gig GD00Z-5 Z-Wave Garage Opener Door Contact Sensor Black

  • Go control Z-wave products provide up to 100 feet range between the wireless controller and/or the closest Z-wave device.
  • Nortek security & control/go control has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide....
  • Add Z-wave control to your current garage door opener. Compatible with virtually any automatic garage opener w-section garage door.
  • Linear Z-wave products provide up to 100 feet range between the wireless controller and/or the closest Z-wave device.
Check Stock

Nortek GoControl WD500Z5-1: Z-Wave Wall Dimmer Switch 500W 908.42 MHz 120VAC 15A

  • The WD500Z5-1 Wall Mounted Dimmer allows remote ON/OFF control and dimming of connected lights. The Z-Wave Wall Mount Dimmer is easily wired in place of a standard wall dimmer. This device requires a Neutral connection. The Wall Mounted Dimmer integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range)..
  • Replaceable Trim Ring The WD500Z5-1 Wall Mount Switch has a field replaceable trim ring - the color of the device can be altered with the Trim Ring Kit model in black, brown, almond and ivory. Auto-Sense: Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status..
  • Maximum Load: 500 Watts for control of permanently installed lighting fixtures only (Not for control of receptacles) Signal (Frequency): 908.42 MHz Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device Input: 120v 15A 60Hz.
  • Network wide inclusion Scene: Command class Security beaming Requires a Neutral Auto-Sense feature built-in Replaceable trim ring design.
Check Stock

Aeotec Z-Stick Gen5 Z-Wave Hub Z-Wave Plus USB to Create Gateway (Ordinary White)

  • Works with Windows / Mac / Linux / Raspberry Pi 4 (2020 upgrade) to create a zwave hub for control of Z-Wave plus and Zwave devices, Tiny but powerful.
  • 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices. package: 1x Z-Stick Gen5, 1x Manual, the others are not included.
  • Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.
  • Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included.
  • Z-Wave Plus certified. Certification number: ZC10-15060006.
Check Stock

Enbrighten 55256 Z-Wave Plus Smart Receptacle, Works with Alexa, Google Assistant, Tamper-Resistant, 1 ZWave 1 Always On Outlet Hub Required, White

  • "ALEXA COMPATIBLE - REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
  • Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required.
  • Wirelessly control lights or appliances by turning them on and off, schedule a timed event, or create a custom scene from anywhere in the world, at any time of the day. Works with all LED, CFL, Halogen, and Incandescent bulbs..
  • Features one always-on pass-through AC outlet and one Z-Wave enabled outlet with tamper resistant outlets..
  • Requires in-wall installation with hard-wired connections - Neutral wire is REQUIRED (wall plate not included).DescriptionTransform any home into a smart home with the GE Z-Wave plus wireless smart lighting control Duplex receptacle. The GE Z-Wave Duplex receptacle enables wireless control of on/off functions from the Z-Wave controlled outlet, and is compatible with incandescent, LED, xenon, halogen....
Check Stock