Top Jaws Chuck

LittleMachineShop.com 0XA Quick Change Tool Post Set for 8x12, 8x14 Lathe (4083)

  • 【EXCELLENT QUALITY】：The dedicated pen drilling lathe chuck body is made of high-quality steel. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck..
  • 【APPLICABLE WORKPIECE SIZE】：The clamping range of the lathe chuck is approx 8×8 to 23×23mm for square shaped material.Weights 1.43 pounds, and 2.5" diameter..
  • 【FREE ACCESSORIES】：We will provide you 2 tightening levers allows you easily to tighten and loosen the jaws..
  • 【HIGH PRECISION DESIGN】：This chuck has a special V- slot design inside the jaw,which is more suitable for clamp square material. The jaws are attached to the chuck body through an I-shaped structure which has high precision and firmness..
  • 【WIDE APPLICATION】：Applicable to pen-making square material clamping, auxiliary drilling, end milling.With a 1-Inch x 8TPI Thread, which is suitable for most woodworking lathes on the market..
Check Stock

HD Chuck HEAVY DUTY 5/8' (16mm) Magnetic Drill Chuck with 3/4' Weldon Shank Adapter by BLUEROCK Tools

  • 5/8" Heavy Duty Chuck for Magnetic Drill Press.
  • 3/4" Weldon Shank adapter (The jacobs taper end press fits into the chuck, opposite end is 3/4" weldon shank).
  • Please confirm your drill is compatible with a 3/4" Weldon Shank.
  • 51mm WIDE x 86mm Long (Jaws Extended) 69mm (Jaws Receded).
Check Stock

PSI Woodworking Products CSCPENCHK Dedicated Pen Drilling Lathe Chuck

  • Chuck weighs 1.2 lbs., and is 2.5" in diameter..
  • The jaws will secure blanks up to 1" across, and 4" long..
  • The chuck is pre threaded to 1" x 8 tpi to match your spindle..
  • Includes two tommy bars to tighten and loosen the jaws..
Check Stock

MILLING INDEXING 4'/ 100 ROTARY TABLE QUALITY PRECISION HORIZONTAL VERTICAL WITH SUITABLE M6 CLAMP KIT & SMALL CHUCK (WITH 65 MM 3 JAWS SELF CENTERING CHUCK)

  • Quality Tool Set of 4" Regular Rotary Table with a 65 mm 3 jaws Self Centering Chuck with Back Plate & fixings T nut Bolts & M6 clamp kit.
  • Chuck Body is High Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground..
  • Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table..
  • It can be mounted both in Horizontal & vertical position. Hand wheel is graduated in divisions of 10 min & can be set to zero..
  • QUICK FAST DELIVERY THROUGH EXPEDITED SERVICE WITH A TRACKABLE AWB NO. TO USA & WORLWIDE..
Check Stock

JET Lathe Chuck Set 1'x8TPI, 5 Sets of Jaws

  • Fits JET Lathe Models JWL-1015, JWL1221, JWL1440 and other models with a 1"x 8 TPI spindle thread..
  • Packed securely in a hard plastic JET case with EVA foam..
  • Includes 5 sets of interchangeable jaws with self centering chuck for varying tasks.
  • Stainless steel T-Handle adjusts jaws concentrically.
Check Stock

VEVOR 2.75-Inch Wood Lathe Chuck, 4-Jaw Precision Self-Centering Keyed Lathe Chuck Set, 1-Inch x 8TPI Thread Mini Lathe Chuck, Woodturning Chuck Jaws, Wood Lathe Accessories for Bowls Vases

  • Applicable Workpiece Size: The wood turning chuck is ideal for mini and lathes. Inner jaws tighten around workpieces varying from 0.9" to 1.9". Outer jaws spread inside of workpieces with pilot holes ranging from 1.4" to 2.5". Comes with a set of accessories, including 1 x chuck key, 1 x Screw Chuck Stud, and 1 x wrench to facilitate your work..
  • High-performance Chuck: Each jaw can be adjusted to the center with superior gripping force. Self-centering improves the flexibility. Clamping most shaped workpieces can also be performed..
  • Simple Operation: This complete lathe chuck set includes a precision jaw and a set of installation tools, which bring much convenience to your operation. The chuck has 1" x 8 TPI Thread and 3/4" x 16 TPI Adapter (Mounted on the Chuck).
  • Compact and Stable: Our mini wood lathe chuck is well-designed and made of high-quality steel. Both sides of jaw teeth and chutes are ground to be sturdy. It is coated with antirust oil to prolong the service life..
  • Versatile Application: Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..
Check Stock

Erie Tools 7 x 14 Precision Bench Top Mini Metal Milling Lathe Variable Speed 2500 RPM & Digital Readout with 5 pc. Cutter Kit

  • Includes the lathe, chuck key, five-piece carbide tipped cutter kit, internal chuck jaws and external chuck jaws, 11 feed rate gears and owners manual.
  • Drill, cut and turn metal, wood and plastic parts with precision..
  • Erie Tools variable speed 7 in. x 14 in. benchtop mini metal lathe creates precision parts..
  • Variable speed motor adjusts to 2500 RPM in either rotational direction allows left-handed threads..
  • Thread indicator helps users turn screw threads anywhere from 12 to 52 TPI. Metric or imperial..
Check Stock

Aogbra 3.75-Inch 4-Jaw Wood Turning Lathe Nickel Plated Chuck and Laser Etched Jaw Set with T Bar Wrench and 6 Point Star Fasteners (1 Inch x 8TPI Thread)

  • [PREMIUM QUALITY] The chuck body and bearings are made of high-quality, high-performance steel that is precisely machined to industry standards..
  • [HIGH-PERFORMANCE JAWS] Multiple jaw sets provide great flexibility to the Aogbra chuck. The self-centering jaws provide superior gripping force, allowing for turning workpieces in a variety of different shapes and sizes..
  • [PRECISION POLISHED COATING] Premium nickel plating and solid construction greatly reduce rust and maintenance, providing a smooth, accurate and beautiful addition to your lathe..
  • [COMPLETE ACCESSORY SET] This complete lathe chuck set includes the Aogbra chuck, 5 jaw sets and necessary installation tools, and a woodworm screw to provide ultimate flexibility to your projects..
  • [WIDE APPLICATION] This chuck set has numerous applications for your shop: General Lathe Use, Grinding, Milling, Drilling, Woodworking, and much more!.
Check Stock

VEVOR Wood Lathe Chuck, 3.75\ Woodturning Chuck, 4-Jaw Gear Chuck, 1In x 8TPI Thread Mini Key Chuck, Precision Self-Centering Woodturning Chuck Jaws, Wood Lathe Accessories for Bowls Vases

  • Applicable Workpiece Size: The wood turning chuck is ideal for mini and lathes. Inner jaws tighten around workpieces varying from 2" to 2.5". Outer jaws spread inside of workpieces with pilot holes ranging from 2.4" to 3.1". Comes with a set of accessories, including 1 x chuck key, 1 x Screw Chuck Stud, 1 x Allen key, and 1 x wrench to facilitate your work..
  • High-performance Chuck: Each jaw can be adjusted to the center with superior gripping force. Self-centering improves flexibility. Clamping most shaped workpieces can also be achieved..
  • Simple Operation: This complete lathe chuck set features an adaptor that change 1''x 8TPI into M33 x 3.5TPI. A set of installation tools can bring much convenience to your operation..
  • Compact and Stable: Our mini wood lathe chuck is well-designed and made of high-quality steel. Both sides of jaw teeth and chutes are ground to be sturdy. It is coated with antirust oil to prolong the service life..
  • Versatile Application: Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..
Check Stock

VINWOX SCR4-4 Wood Lathe Chuck, 4-Jaw Self-Centering Chuck, with 1\x8TPI thread & 3/4\x16TPI Adapter, 3 Years Warranty

  • ✅Products include: Included Chuck body, a set of Tightening Levers, T allen wrench, Screw chuck, adapter converts 1'' x 8TPI to 3/4" x 16TPI and Free Automatic Spring Loaded Center Punch, MAKE SURE check your wood lathe FIT first..
  • ✅Internal jaws tighten around workpieces varying from 1-1/2" to 3" (or 3" Square Block). External jaws spread inside of workpieces with pilot holes ranging from 2" to 3-5/8" Included screw chuck provides even more options for supporting your projects.
  • ✅4" sturdy steel body with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground and hardened for long and stable service life. All guideways and bearing surfaces are precisely machined.
  • ✅Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects. Widely used for machine tools and accessories for general lathes and industrial machines.
  • ✅Stable Service and Long Life: VINWOX Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life.
Check Stock

WEN LA4444 4-Inch 4-Jaw Self-Centering Chuck Set with 1-Inch x 8TPI Thread

  • Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects.
  • Internal jaws tighten around workpieces varying from 1.6 to 2.8 inches in size.
  • External jaws spread inside of workpieces with pilot holes ranging from 2 to 3.2 inches.
  • Included screw chuck provides even more options for supporting your projects.
  • Features a 1” x 8 TPI thread for compatibility with the majority of wood lathes on the market.
Check Stock

uxcell Drill Chucks, 1.5-10mm Capacity 3/8-24 UNF Threaded with Chuck Key for Electric Impact Corded Cordless Drill

  • [SIZE] - Clamping Range: 1/16"-3/8"(1.5-10mm), Mounting Thread: 3/8"-24UNF.
  • [CHUCK TYPE] - Keyed Drill Chuck, can be quick and easily replaced drill bits with chuck key(chuck key is included in the package).
  • [3-JAW] - Classic 3 jaws design drill chuck with excellent clamping capability. Quenching hardening and precision grinding to assure good wear-resistant.
  • [APPLICATIONS] - Suitable for drilling equipment such as portable drilling machine, bench drilling machines, milling machines, lathes, etc. It is compatible with many different types of drilling machines.
  • [MAINTENANCE] - Clean up the mechanical waste and foreign matter left in the drill chuck in time after using it. Use the appropriate chuck key for disassembly. Improper installation or disassembly of the drill chuck will increase the accuracy and runout value.
Check Stock