Top Kayak Mounts For Trucks

Spring Creek Manufacturing Hydrodynamic Kayak Stabilizer Float Package (Gray, 40)

  • ...er to make the best kayak stabilizer on the market. Each float weighs 4lbs and has a 27lb per float buoyancy. The universal receiver bar weighs between 7 and 8.5lbs depending on the size. Each Stabilizer Package comes with 1 Universal Receiver Bar, 2 Stabilizer Floats, 2 Telescoping Arms, and 1 set of Kayak Adapter Mounts..
  • Hydrodynamic Design for minimal drag through the water and excellent stability. Easily adjustable with locking cam lever arms. Color options: Gray, Red and Yellow. Each float measures 37" from tip to tip..
  • UNIVERSAL RECEIVER SIZING (LISTED AS "DISPLAY LENGTH"): The Universal Receiver Crossbar is made in different lengths to fit all canoes and kayaks. Standard sizes are 30″, 36″, 40″ and 45″. To size your kayak for a Unversal Receiver Crossbar, first, measure your kayak at the desired mounting point. We reccomend that you have them mounted far enough away from the sitting position so they are not in the way of the paddle stroke..
  • Once measured, order the size that is one bigger then the measured distance. (Example: Measurement=34" Order the 36" Universal Receiver Crossbar.....
Check Stock

Perception Kayak Sponge | Kayaking Water Absorbing Sponge | Absorbs up to 1 Liter, Yellow, One Size

  • The Kayak Rudder Size - Size: Approx. 47 *15.5 * 14.2cm / 18.5 * 6.1 * 5.6 in (L * W * H)； Rudder blade length: Approx. 45cm / 17.7in.
  • Sturdy & Tough - Material: Nylon & 304 stainless steel；Pin measures approximately 1.8" in length and 0.4" in diameter..
  • Installation And Use - Able to be secured when in the raised position to prevent the rudder from self deploying.
  • Wires run from the blade to your foot brace which are used to control the rudder during paddling..
  • The Controlling Direction - Mounts on the stern of your kayaks vertically.
  • Gain control of your kayak in windy or turbulent conditions..
  • Use Widely - Work with foot control (Not Included) to achieve the effect of direction change and designed for seayak, kayak, canoe, angling boat, etc.
Check Stock

Dometic SeaStar Cable Clip DS 035531

  • Stainless steel mounting hardware is included with the outriggers/stabilizer kit, as shown in the listing’s picture. The stabilizer kit consists of 2 durable PVC float kits in red and off-white color, 2 aluminum arms/poles (together with lock nuts), and 2 Side/Deck Mounts that are made of durable, high impact fiber-reinforced structural quality PP (Polypropylene)..
  • Measurement of: PVC Float Kits – 27-1/2” (L) x 5” (W).
  • Aluminum Arms/Poles – 31-1/2” (L), 1-3/16” Diameter.
  • Side/Deck Mounts Screw Holes Distance — 3-1/4” (L) x 1-1/4” (W). Net Weight of the set: 5lb..
  • The large, easy-gripping lock nuts offer simple adjustment on the outriggers. It has a red button as quick release lock to lock and unlock the outriggers and stabilizers in order to secure the position. Simply press the red button to detach..
  • This outrigger/stabilizer system has an ONE (1) Year Limited Product Warranty. Disclaimer: This listing sells only the outrigger/stabilizer system and the kayak displayed is only for reference and is not for sale. Item Number: PE401001..
Check Stock

Pactrade Marine Boat Kayak Canoe PVC Outrigger Arms Stabilizer System Fishing

  • Stainless steel mounting hardware is included with the outriggers/stabilizer kit, as shown in the listing’s picture. The stabilizer kit consists of 2 durable PVC float kits in red and off-white color, 2 aluminum arms/poles (together with lock nuts), and 2 Side/Deck Mounts that are made of durable, high impact fiber-reinforced structural quality PP (Polypropylene)..
  • Measurement of: PVC Float Kits – 27-1/2” (L) x 5” (W).
  • Aluminum Arms/Poles – 31-1/2” (L), 1-3/16” Diameter.
  • Side/Deck Mounts Screw Holes Distance — 3-1/4” (L) x 1-1/4” (W). Net Weight of the set: 5lb..
  • The large, easy-gripping lock nuts offer simple adjustment on the outriggers. It has a red button as quick release lock to lock and unlock the outriggers and stabilizers in order to secure the position. Simply press the red button to detach..
  • This outrigger/stabilizer system has an ONE (1) Year Limited Product Warranty. Disclaimer: This listing sells only the outrigger/stabilizer system and the kayak displayed is only for reference and is not for sale. Item Number: PE401001..
Check Stock

SportRack Mooring 4-in-1 Kayak & SUP Carrier

  • Carries both kayaks and SUPs in different configurations.
  • 4 ways to carry: 1 kayak in a j-cradle, 1 kayak in the saddle, 2 kayaks vertically using a stacker or SUPs in the saddle.
  • Includes two pairs of bow and stern tie downs and four load straps.
  • Accommodates kayaks up to 36" (91cm) wide.
  • Maximum single boat load should not exceed 75 lbs (34 kg) and maximum dual boat load should not exceed 130 pounds (59kg).
  • Mounts directly to most factory and aftermarket roof racks (max. 3.5 inch crossbar diameter).
Check Stock

QWLWBU Kayak Rudder Fishing Watercraft Canoe Boat Rudder,Kayak Rudder Kit with 6.6FT Elastic Rope Replacement Parts Foot Control Steering System Kayak Accessories(Black,Size:19.09 x 4.72inch)

  • 【FOOT CONTROL】This is a kayak rudder with foot control, which can be used with foot control (not included) to achieve the effect of direction control. designed for kayak, canoe, angling boat, etc..
  • 【LIGHTWEIGHT AND FOLDABLE】The canoe rudder is light and portable. Due to its foldable design, it is convenient to carry, easy to store, easy to install, and save time and space..
  • 【DURABLE AND STURDY】This canoe rudder is made of high-density nylon, strong, practical and durable. Can be used for a long time. With a 2m/6.6ft elastic rope and 20pcs POM buckle. Easy to use.kayak rudder (L x W) 48.5 x 12cm/19.09 x 4.72inch elastic rope length 2m/78.74inch, diameter 4mm/0.16inch hook hole diameter 5mm/0.20inch.
  • 【DIRECTION CONTROL】This canoe rudder is finely machined, has a firm structure, and has strong directional control capabilities.Mounts on the stern of your kayaks vertically.
  • Gai n control of your kayak in windy or turbulent conditions..
  • 【WIDE USAGE】 Achieve the effect of direction change and designed for seayak, kayak, canoe, angling boat, fishing boat, etc. Suitable for all types of kayaks or boats. Universal and convenient to use..
Check Stock

Glide Gear 1X Dual Offset Fishing Rod Spreader Outrigger Boat Trolling Holder

  • Stainless steel mounting hardware is included with the outriggers/stabilizer kit, as shown in the listing’s picture. The stabilizer kit consists of 2 durable PVC float kits in red and off-white color, 2 aluminum arms/poles (together with lock nuts), and 2 Side/Deck Mounts that are made of durable, high impact fiber-reinforced structural quality PP (Polypropylene)..
  • Measurement of: PVC Float Kits – 27-1/2” (L) x 5” (W).
  • Aluminum Arms/Poles – 31-1/2” (L), 1-3/16” Diameter.
  • Side/Deck Mounts Screw Holes Distance — 3-1/4” (L) x 1-1/4” (W). Net Weight of the set: 5lb..
  • The large, easy-gripping lock nuts offer simple adjustment on the outriggers. It has a red button as quick release lock to lock and unlock the outriggers and stabilizers in order to secure the position. Simply press the red button to detach..
  • This outrigger/stabilizer system has an ONE (1) Year Limited Product Warranty. Disclaimer: This listing sells only the outrigger/stabilizer system and the kayak displayed is only for reference and is not for sale. Item Number: PE401001..
Check Stock

RAD Sportz Kayak Rack Storage System- Boat Dock Wall Mounts Made from Durable Steel for Indoor or Outdoor Storage in Garage, Shed, or on Any Wall (83-DT5112)

  • CONVENIENT- Store your bulky kayak, surf board, or other water craft off the ground and out of the way until you use it! Keep it safely secured without taking up much shed or garage space. These docking mounts hang right up onto a wall, indoors or out..
  • STRONG BUILD- This kayak hook system is made with durable steel tubing, making it viable for indoor or outdoor use! The strong steel lets this canoe cradle hold up to 150lbs, making it ideal for any larger, heavier kayak or canoe..
  • DESIGNED TO PROTECT- The strong, steel arms that hold up your boat are coated with a thick foam to protect the vessel while docking or undocking. Mounting your boat off the ground also provides protection from potential damage while not in use!.
  • ADDED SECURITY- Tough adjustable safety straps keep the kayak secured into the hook system for extra security and peace of mind..
  • PRODUCT DETAILS- Dimensions: (L) 34.6” x (W)14.4”x(H) 2.8”. Weight capacity- 150 lbs..
Check Stock

EASYBERG Long Tube Headers 1 3/4' Conversion Swap Compatible with Chevy C10 LS Truck LS1 LS2 LS3 LS6

  • ➹Fitment:C10 Pickups: Chevy & GMC Trucks 1960+.
  • ➹Fitment:1988-1998 C1500 Trucks (Silverado, Sierra) 1"" Offset Back Motor Mounts Required.
  • ➹Fitment:(1960-1966 C10 Trucks require slider engine mounts to clear the front crossmember)Except 86 C10.
  • ➹We stand behind our headers in saying you will not find a better fitting, quality built, budget header for your vehicle..
  • ➹Our headers are mandrel bent, tig welded, and feature polished stainless steel construction..
Check Stock

AA Products Model X35 Truck Rack with 8 Non-Drilling C-Clamps and 2 Sets Folding Kayak J-Racks with Ratchet Lashing Straps

  • Non-Drilling X35 Truck Rack with 8 C-Clamps included, NOT COMPATILE with trucks with Utility Track Systems.
  • Easy Installation – Fast setup and take down when not in use.
  • Heavy Duty Extended bolts added for extra security.
  • Heavy Duty Securing Ratchet Straps tight on your kayak, Canoe, 16 Ft long (4 Pack), 2200 Lbs Tested, easy and safe for your transport. Ratchet Kayak and Canoe Bow and Stern Tie Down Straps Adjustable Rope Hanger (1/4″ x 10′, 4 pcs, 300 LBS/Pair).
  • 2 Pair of Steel Folding Kayak J-Racks (4 racks for 2 kayaks).
Check Stock

AA Products Model X35 Truck Rack with 8 Non-Drilling C-Clamps and 2 Sets Double Folding Kayak J-Racks with Ratchet Lashing Straps

  • Non-Drilling X35 Truck Rack with 8 C-Clamps included, NOT COMPATILE with trucks with Utility Track Systems.
  • Easy Installation – Fast setup and take down when not in use.
  • Heavy Duty Extended bolts added for extra security.
  • Heavy Duty Securing Ratchet Straps tight on your kayak, Canoe, 16 Ft long (4 Pack), 2200 Lbs Tested, easy and safe for your transport. Ratchet Kayak and Canoe Bow and Stern Tie Down Straps Adjustable Rope Hanger (1/4″ x 10′, 4 pcs, 300 LBS/Pair).
  • 2 Pair of Steel Double Folding Kayak J-Racks (4 racks for 2 kayaks).
Check Stock

AA-Racks Model X35 Truck Rack with 8 Non-Drilling C-Clamps and 2 Sets Kayak J-Racks with Ratchet Lashing Straps & Ratchet Bow and Stern Tie Down Straps

  • Non-Drilling X35 Truck Rack with 8 C-Clamps included, NOT COMPATIBLE with trucks with Utility Track Systems.
  • Easy Installation - Fast setup and take down when not in use.
  • Heavy Duty Extended bolts added for extra security.
  • Heavy Duty Securing Ratchet Straps tight on your kayak, Canoe, 16 Ft long (4 Pack), 2200 Lbs Tested, easy and safe for your transport. Ratchet Kayak....
  • 2 Pair of Kayak J-Racks (4 racks for 2 kayaks).
Check Stock