Top Key Blade Shell

Replacement Key Fob Case Shell Fit for GM Chevrolet Flip Folding Key Shell Remote Key Case 4 Buttons

  • 【EXCELLENT REPLACeMENT CASE SHELL】This is a brand new keyless entry remote case with uncut blank key for selected vehicles. NO interior (remote/electronics/transponder chips) unit inside..
  • 【DEFINITELY a MONEY SAVER】Best replacement remote shell for a key with broken buttons or worn key case..
  • 【EASY to REPLACE】All you need to do is to switch the internal components from your old remote key fob to our new key case and take the uncut key blade blank to a locksmith or a dealer to be cut to match your car..
  • 【COMPATIBILITY】If your current key remote looks the same as the pictures show,this flip key shell will fit..
  • 【DURABLE KEY SHELL】This remote casing is built to last long. Any issue or question with this keyless remote outer casing,kindly please just feel free to contact us..
Check Stock

Horande Replacement Key Fob Cover Case fits for Mitsubishi Eclipse Galant Lancer Outlander Keyless Entry Key Fob Shell (Pack 2)

  • It is only shell without cricuit board / chip and Blade..
  • Fit for Mitsubishi Eclipse 2006-2012 Endeavor 2006-2011 Galant 2006-2012 Lancer Outlander 2007-2013 Key Fob Accessories..
  • No need to cut the blade, just remove your fob blade to this new case. Save much money and time..
  • No programming is required. Just remove the original electronics to the new key shell..
  • 1 PCS Replacement case and 1PCS screw driver..
Check Stock

for Mazda Key Fob Shell Keyless Entry Remote Control Smart Car Key Fob Case Cover Fit for Mazda 3 6 2014-2018 SKE13D-01 (4 Buttons, Silver)

  • 【Fitment】This key fob case fits for 4 buttons mazda smart key fob. Please make sure your original key remote has the same buttons as the picture shows..
  • 【Great Key Case】Best replacement for broken or worn keys, or great for an additional key..
  • 【Only Replacement Key Fob Shell】This is just an empty replacement key shell ,no electronics or circuit board are included..
  • 【Easy to Assemble】Just cut the key blade,take the internal electronics (include immobilizer/transponder chip) from your original remote and place them to our key shell, then it is OK! No programming needed!.
  • 【Durable Key Fob Case】This key fob cover case is made of durable long lasting material..
Check Stock

Key Fob Case Shell Fit For Ford Explorer Edge Mustange Fusion 5 Buttons Replacement Keyless Entry Remote Smart Key Fob Cover Casing with Button Pad & Uncut Key Blade Blank

  • 【EXCELLENT REPLACeMENT CASE SHELL】This is a brand new keyless entry remote case with uncut blank key for selected ford vehicles. NO interior (remote/electronics/transponder chips) unit inside..
  • 【DEFINITELY a MONEY SAVER】Best replacement remote shell for a key with broken buttons or worn key case..
  • 【EASY to REPLACE】All you need to do is to switch the internal components from your old remote key fob to our new key case and take the uncut key blade blank to a locksmith or a dealer to be cut to match your car..
  • 【COMPATIBILITY】If your current key remote looks the same as the pictures show,this key fob shell will fit..
  • 【DURABLE CAR KEY FOB SHELL CASE】This remote casing is built to last long. Any issue or question with this key fob case,kindly please just feel free to contact us..
Check Stock

KEY GM A6 R4 SHAFT

  • 【Fits】A perfect replacement replacement for your key with broken buttons or worn key blade,Fits Land Rover Discovery 2 TD5 A76 Black..
  • 【High Material】Made of high quality ABS material and very durable..
  • 【Just a Shell】Inner remote is not included and you can use your old remote..
  • 【Easy to Install】No programming require with your old remote..
  • 【Convenience】Easy installation and you need just take the internal electronics from your original remote and place them to our key shell..
Check Stock

KeylessOption Keyless Entry Remote Uncut Car Blank Key Blade Case Fob Shell for Toyota Camry Scion HYQ12BDM

  • KelyessOption replacement keyless entry remote key fob shell case button pad (Not a complete key this is just the shell).
  • Outer cover shell case with blank uncut key blade only - no electronics or circuit board included.
  • For FCC ID: HYQ12BDM, HYQ12BEL, HYQ12BDP (Please match the FCC ID from the original key to confirm this case is correct).
  • Compatible with 4 button remotes with car trunk or SUV hatch button both remotes will fit this case.
  • Constructed with high quality materials for long lasting durability, This is a replacement part to match the original in form and function.
Check Stock

Car Key Fob Keyless Entry Remote fits 2007 2008 2009 Mazda 3 (KPU41794, 41794)

  • Caution Notice: It does not replace the core electronics. Any existing defects of the electronic core will not be fixed by the shell replacement. Only Key Shell, NO interior (remote/electronics/transponder chips) unit inside..
  • Installation step: 1. Fit the uncut blade end to the bottom case. 2. Install the battery and chip into the groove of the bottom case. 3. Put the 4 buttons into the top case, and then put in the white rubber pad to fasten the bottom case, the installation is complete..
  • Fitment: Fit for Mazda 3 5 6 RX-8 CX-7 CX-9..
  • 4 Key Button: Lock, Unlock, Trunk Hold, Panic.
  • Dimension: 113x32x18mm / 4.45"x1.26"x0.71"(L*W*T).
Check Stock

Beefunny Replacement Remote Car Key Shell Case Fob 4 Button for Mazda 3 6 2014-2018 SKE13D-01 (Key Shell ONLY)

  • It's just a remote key shell. (No remote/electronics/ignition or transponder chips).
  • You can easily move the internal components from your old remote to this new replacement smart key case..
  • The key blade needs to be cut at your local dealer or qualified locksmith..
  • Compatible with: for Mazda 3 6 2014-2018.
  • Package Content: 1 Pcs remote key shell.
Check Stock

A Pair New Remote Keyless Key Shell Case Fob fit for TOYOTA Camry Avalon Corolla Matrix RAV4 Venza Yaris 4 Buttons

  • This item isn't a remote key, it's just a remote key shell. NO (remote/electronics/ignition or transponder chips).
  • Pls cut the key blade, take the internal electronics (include immobilizer/transponder chip) from your original remote and place them to our key shell, then it is OK! There's no programming needed.
  • Best replacement for broken or worn keys, or great for an additional key.
Check Stock

Replacement Key Fob Case Shell Fit for Toyota Tacoma Land Cruise Prius V RAV4 2016 2017 Keyless Entry Remote Control Car Key Fob Cover Housing (1)

  • 【EXCELLENT SMART KEY FOB SHELL REPLACeMENT】This is a brand new keyless entry remote key fob case for selected vehicles. NO interior (remote/electronics/transponder chips) unit inside..
  • 【DEFINITELY a MONEY SAVER】Best replacement key shell for a key with broken buttons or worn key case..
  • 【EASY to REPLACE 】All you need to do is to switch the internal components from your old remote key fob to our new key case and take the uncut key blade blank to a locksmith or a dealer to be cut to match your car..
  • 【DURABLE KEY FOB COVER CASE】This key fob case is built to last long. Any issue or question with this keyless remote outer casing,kindly please just feel free to contact us..
Check Stock

Heart Horse Keyless Entry Key for A-UDI A4 A6 A8 S4 S6 S8 TT Fob Remote Shell Case Replace 4D0837231E 4D0837231P MYT8Z0837231 No Chip

  • 【OEM Part Number】MYT8Z0837231, 4D0837231E, 4D0837231P..
  • 【Key Shell Only】This is a brand new keyless entry remote control enclosure with uncut blade blank. There is no internal....
  • 【Easy to install】No programming is required, simply swap your existing electronics inside this shell..
  • 【Blank blade】The key blade needs to be cut at your local dealer or qualified locksmith..
  • 【Fitment】1997-2005 A4/2001-2005 A4 Qu-attro/1997-2001 A6/2001-2005 A6 Qu-attro /1997-1999 A8/2001-2005 A8 Qu-attro /2001-2005 All-road Qu-attro....
Check Stock

Pack 2 Horande Replacement Key Fob Cover Case fit for Honda 2003-2014 Accord 2005-2006 CR-V Ridgeline 2006-2013 Civic 2009-2015 Pilot Keyless Entry Key Fob Shell 3+1 Buttons

  • Brand new key shell replacement for selected honda vehicles.No electronics or circuit board are included..
  • You need to remove your key blade to our case.Easy installation which does not require reprogramming..
  • Best replacement key shell for broken or worn keys, or great for an additional key..
  • This is a replacement part to match the original in form and function..
  • NOTICE: The key case to match your vehicle, this key fob case fits on 2 style inside part, pls check photos before you order it.
Check Stock