Top Large Diameter Pipe Line

1 CTS Elster Natural Gas Permasert Line Chamfering Tool Version 2 PN 58504

  • Line size: 1 inch CTS Poly Pipe (1-1/8" Outer Diameter) *Please review sizing diagram..
  • Creates a proper O.D. and I.D chamfer which prevent seal damage when stabbing of the PE piping into New 2.0 Permasert couplings. REQUIRED to properly....
  •  IMPORTANT NOTE: There are various pipe sizes described as either IPS or CTS. These are DIFFERENT pipe sizing standards with different OUTER and....
Check Stock

LOKMAN 5 Pack 12 Inch Stainless Steel Hose Clamps Large Worm Gear Duct Clamps Adjustable from 11.5 inch-12 inch / 290mm - 310mm Fuel Line Hose Pipe Clamp for Dryer Vent Hose

  • 12 inch Size is for DIAMETER, NOT FOR circumference. - 304 Stainless Steel Hose Clamps- The whole large duct vent clamp (including the band, housing and screw) are all made of premium 304 stainless steel. Durable, strong and rust resistant..
  • Flexible adjustable size rang- Flexible and durable metal fuel line hose clamp with adjustable diameter size range from 11.5 inch-12 inch. Fit for hose diameter 290-310mm/11.5-12 inch. Secures ducting tightly in place..
  • Widely Use- These large metal hose clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, mechanical, agriculture, boat/marine, shield, household etc. Both indoor or outdoor..
  • Great Value - LOKMAN large quantity set stainless steel hose clamp achieve great favorable price. The large quantity, the more favorable price. You can't miss it if you need a large bunches..
  • Environmentally Friendly- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..
Check Stock

Oatey 30863 Heavy Duty Solvent Cement, 8 Oz, Can, Liquid, Clear

  • Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure.
  • Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements.
  • Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure.
  • Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD).
  • Thick formula fills gaps in large diameter pipe and loose fitting joints.
  • Recommended for potable water, pressure pipe, conduit and DWV.
  • Recommended application temperature 40°F to 110°F / 4°C to 43°C.
Check Stock

KEONG 5-Feet Fuel Line Hose Tube with 4 Size I.D. x O.D. 3/32In x 3/16In 1/8In x 3/16In 1/8In x 1/4In .080In x .140In for Poulan Craftman Chainsaw String Trimmer Blower, 5 Feetx4

  • Adapt to temperature: -30 ° C -120 ° C.
  • The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications..
  • Good to replace it at regular intervals,extra 10 Pcs Mini Fuel Hose Clamps Adjustable with screw-tightening hose clamps for more robust applications. could save you a lot time to find proper clamp in local market..
  • Designed for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors snow blowers dirt bikes and just about all small with 1/4" or 5/16" fuel lines engines..
  • Package includes: 6 Feet 1/4" ID Fuel Line.
  • 10 Pcs 13/32''-15/32''' Mini Fuel Hose Clamps Adjustable. Fuel filters and hose clamps are required for the use of fuel line. The dimensions of the various components within the kit are compatible.You do not need to purchase those part extra!.
Check Stock

EVIL ENERGY 2.75 ID to 3 OD Exhaust Pipe Reducer Adapter 304 Stainless Steel Universal

  • Size: Small Diameter: 2.75" (2 3/4inch) ID/69.85mm (Fits over 2.75" OD Pipe). Large Diameter: 3" OD/76.20mm (Fits inside 3" ID Component). Length may....
  • Fitment: Universal fit for all exhaust / turbo / intercooler / intake piping connection. Welding is recommended..
  • Category: Pipe to Component (Use when your pipe is smaller than your component).
  • Material: 304 stainless steel. Package: 1PC 2.75 inch ID to 3 inch OD exhaust reducer..
  • EVIL ENERGY provides 3-month warranty for this exhaust pipe adapter reducer. Professional installation is highly recommended. Any problem you have,....
Check Stock

Rodeel 24 PCS Fishing Leaders Wire with 49 Strands Tooth Proof Stainless Steel with swivels

  • Package Content:24pcs fishing wire leaders rigs.
  • Length: 25cm/0.82inch,Line Diameter: 1mm/0.04inch,Steel wire Pulling Force:40KG/88.18LB.
  • Material:High-strength stainless steel wire +hot air pipe.
  • Design - 8-ring interface ring solves the winding problem, and use hot air pipe to wrap the snap and swivel, remain stable underwater, fish loading rate is higher.
  • Lamination fishing line- 304 stainless steel 49 stranded wire，very soft and strong. The 49 strand design makes it very durable, and the 304 lamination stainless steel wire used will not rust..
Check Stock

9.85-Foot/3m Length Stretchy 1/4 Inch ID Fuel Line+20pcs 1/3\ ID Hose Clamps for Lawn Mower Tractor Kawasaki Kohler for Briggs & Stratton motorcycle snow blowers Small Engines

  • Product name: ID Fuel Line Kit with 10PCS 2/5" (11mm) ID Hose Clamps..
  • Thickened pipe wall design: The fuel pipe is divided into three levels: inner pipe, middle layer and outer pipe. The inner diameter is about 1/4" (6mm), the outer diameter is about 0.53" (13.5mm) and the wall thickness is about 0.16" (4mm)..
  • Product material: the inner tube is made of rubber, and the middle layer is made of fiber thread. The hose clamp is made of spring steel.
  • Product advantages: comfortable appearance, smooth and flat.
  • high and low temperature resistance, wear-resistant rubber fiber layer can be woven, can make the hose withstand greater pressure, used for connection, fixation, and ensure its stability..
  • Scope of application: suitable for small engines: tractors, lawn mowers, snow machines, power equipment, etc..
Check Stock

Flexible Extension Drain Pipe, Angle Simple Flexible 1-1/4

  • FIX ALIGNMENT OR OTHER PLUMBING PROBLEMS: bathroom sink drain extension pipe is adjustable to fix an offset or other difficult plumbing problems. Inner diameter of the top connection that attaches to a tailpiece is 1-1/4"(32mm), outer diameter of the bottom outlet is 1-1/4"(31mm)..
  • FLEXIBLE & ADJUSTABLE CORRUGATION DESIGN: flexible corrugated pipe can be easily expanded and bended to an "U", "S" or other shapes, with maximum expanded length of 33-1/16"(840mm), 14-9/16"(370mm) long when compressed..
  • PREMIUM AND SOLID CONSTRUCTION: solidly constructed of thick and hard plastic with steel wires wrapped inside for durability, rustproof and corrosion resistant, strong and durable for long term use, not easy to split..
  • FAST DRAINING & NICE CONNECTION: diameter of the corrugated pipe is 1-1/2"(38.6mm), large enough for fast draining, not easy to get clogged, snugly connect to a sink drain with the rubber connection without leaking..
  • EASY TO APPLY & FUNCTIONAL REPLACEMENT: easy to connect the top part to a tailpiece of a standard sink drain stopper (diameter of the tailpiece should be 1-1/4" or 30-32mm), it's a great replacemenf for those metal ones..
Check Stock

General Tools RW122 Replacement Cutter Wheel for Larger Capacity Cutters

  • The General Tools and Instruments RW122 gold standard tubing cutter wheel is the new quality standard replacement cutter for General Tools tubing cutters.
  • General Tool's gold standard cutting wheels are made from tempered, bearing tool steel for smooth, exact pipe cuts.
  • The slim-line surface geometry ensures fewer inner surfaces burrs and less chance for outer surface distortion.
  • The RW122 replacement cutter wheel is designed for larger capacity cutters on iron pipes, PVC pipes, and other tough surfaces.
  • This cutter wheel fits General Tools Model # 120, # 125, and #126.
  • The combination of shape, strength, and durability enable these cutter wheels to repeatedly provide quicker cutting without deforming the pipe's outer diameter and cuts with minimum inner diameter burning.
Check Stock

Burly Brand Narrow Bottom Ape Hanger Handlebar - 12 inch Height, Chrome Finish, For Harley Davidson and Most Motorcycles (B28-349)

  • Fitment: Fit most Harley Dyna Softail Sportster XL 883 1200 & 1994-2022 Road King Model & 1998-2013 Road Glide. Do not fit Harley Electra Glide,Street Glide & 2014-UP Road Glide. Do not fit 2008-2011 Harley Cross Bones FLSTSB with OEM risers..
  • Material: Steel line pipe (Much Stronger than other's Straight Seam Welded pipe handlebar on the market). Finish: Triple Chrome Plating(Copper+Nickle+Chrome)..
  • Handle Bar Specifications: Bar Diameter: 1.5 inch Fat Bar. Center Width: 11-1/2 inch, Clamp Area Width: 5.4 inch & Diameter: 1 inch. Grip Area Bar Diameter: 1 inch. End Rise: 16 inch. Overall Width: 35.5 inch. Pullback/Sweep: 8 inch..
  • Model: Monkey Bagger Bar. Pre-Drilled: Yes..
  • Package include: 1x Chrome 16" Rise Ape Bar Monster Handlebar.
Check Stock

Kinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting

  • ' MIP (Tapped 5/8'' FIP) and a sealing tape. Factory leak tested 100% pass!.
  • 「COMPATIBLE WITH」- A stainless steel gas line hose mainly use for connecting gas stove, gas dryer, furnace, gas water heater. Gas pipe outside dimension of 1'', inner diameter 3/4''. Thicker pipe diameter can transmission gas quickly..
  • 「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
  • 「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
  • 「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused for another gas appliance or at another location. Test for leaks only with leak test solution. Rinse with clean water after leak testing..
Check Stock

RIDGID 21893 SeekTech SR-20 Locator, Line Tracer and Underground Utility Locator, Yellow, Small

  • Passive Radio Trace:4 kHz-15 kHz, 15 kHz-36 kHz.
  • Large LCD screen graphically displays representation displaying proximity signal, signal strength, target line and guidance arrows to quickly identify distortion and help map difficult locates.
  • Omni-Seek technology increases accuracy and efficiency when searching in passive mode- continuously searches passive power and radio bands to locate and avoid unknown metallic lines.
  • Trace any pipe locator frequency from 10 Hz to 35,000 kHz* while utilizing plumbing camera snakes, sonde (beacons), and wire transmitters for better underground utility location and pipe line tracing.
  • 3 antennas offset 120 degrees from each other in each housing and 2 gradient antennas (8 total antennas) make it easier to pick up the signal regardless of orientation and angle.
  • Continual Depth feature increases productivity by showing depth changes of signal from underground pipe in real-time.
Check Stock