Top Large Digital Display Measuring Tool

Michark Digital Caliper Caliper Measuring Tool Electronic Micrometer Calipers Stainless Steel Vernier Caliper with Large LCD Screen/Inch and Millimeter Conversion/Auto-Off with Case, 6 to 7.9 Inches

  • 【Precise Measurement】 Measurement range: 0 - 6" / 0 - 150mm.
  • Accuracy: ±0.03mm/0.001". The knurled thumb wheel and screws ensure smooth sliding and accurate scale positioning. stainless steel accurate digital caliper measuring tool is perfect for household or DIY measurement..
  • 【Extra Large LCD Display】The digital calipers is euiqpped with an easy-to-read 2“x0.8" LCD screen that helps you to get precise results quickly and easily. ON/OFF button is to turn on or turn off display, ZERO button helps to set the reading on display to be zero..
  • 【4 Measuring Modes】 This micrometer can be used to measure inside and outside diameter, depth and step with two sets of jaws and a probe. It comes with 3 batteries in total and it is very easy to install the battery without any tools. One battery can last about one year. Auto off after 5 minutes. When you don't use it for a long time, please tighten the screw to make the caliper fixed to avoid wasting battery power..
  • 【Inch/mm Conversion】One button switches between two units quickly -- inch and millimeter. Home DIY and professional use are both highly recommended. A portable case for this digital caliper measuring tool allows you to take it anywhere and protect it well....
Check Stock

Klein Tools 935DAG Digital Electronic Level and Angle Gauge, Measures and Sets Angles & General Tools T-Bevel Gauge & Protractor - Digital Angle Finder with Full LCD Display & 8\ Stainless Steel Blade

  • ...ty reverse contrast display improves visibility in dimly lit work environments.
  • Product 1: Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces.
  • Product 1: V-groove edges enable optimal alignment on conduits and pipes for bending and alignment.
  • Product 2: ANGLE MEASURING TOOL: There's no more guesswork when it comes to measuring out your angles and cuts, thanks to our metal ruler. Create your layout on a flat surface, grab your slab of wood, your woodworking partner, and start the construction..
  • Product 2: SLIDING BEVEL: Set and transfer interior and exterior angles quickly and accurately with our level tool. We make it easy for you to build cabinetry, furniture, picture frames, and other wood-inspired projects..
  • Product 2: DIGITAL ANGLE GAUGE: Four large control buttons provide five functions, including power on/off, reading hold, read reverse angle, flip display, and clear readout. The automatic shut-off feature preserves battery life on our protractor tool..
  • Product 2: WOODWORKING RULER: This commercial-grade digital sliding T-bevel and digital protractor with an impact-resistant ABS handle features a 360-degree stainless steel blade. The battery-powered gauge includes 1 CR2032 lithium-ion batter....
Check Stock

NEIKO 01401A 6-Inch Electronic Digital Caliper, Stainless Steel, Extra Large LCD Screen, Measurement Conversions for Inches, Millimeters, and Fractions

  • DIGITAL CALIPER MEASURING TOOL: Our 6-Inch Electronic Digital Caliper tool provides you with precise and accurate measurements. Use this digital ruler to find the diameter, depth, and step measurement of the materials you’re working with..
  • DIGITAL MEASUREMENTS: This digital caliper has a 1-button quick-change feature that easily converts between inch, fraction, and millimeter modes. Each number appears on the large and highly visible LCD screen..
  • VERSATILE MEASUREMENT TOOL: Our caliper measuring tool contains 2 sets of jaws and a probe to measure inside and outside depth and step measurements. Use these measuring calipers for wood, jewelry, metal, or other materials..
  • ACCURACY & PRECISION: This measuring caliper tool measures from 0"–6" and 0–150 mm and has a resolution of 0.0005" / 1/128" / 0.01 mm and an accuracy of 0.001" / 0.02 mm. This tool helps eliminate errors and miscalculations..
  • HIGH-QUALITY MATERIALS: Made with polished and hardened stainless steel, the caliper’s frame has a durable feel with a knurled thumb roller and a locking screw for smooth sliding and accurate position locking..
Check Stock

General Tools Digital Caliper #147 - 6\ Precision Measuring Tool - Stainless Steel Ruler

  • AUTO POWER OFF: Fabricated from heavy-duty stainless steel and non-marring carbon fiber, our caliper tool can measure inside and outside diameter, depth, and step measurements. It includes an auto-on/off feature that preserves battery life..
  • DIGITAL RULER: Provides highly accurate calculations for measuring and fitting joints, checking board thicknesses, and setting cutting depths. Perfect for construction jobs and home improvement projects..
  • ELECTRONIC CALIPER: Helps make projects and woodworking jobs easier and more efficient. Our angle indicator includes a conversion chart with instructions, a spare battery, battery cover screwdriver, and a protective foam-lined case for easy storage..
  • GENERAL TOOLS: We have been a recognized leader in the innovation, design, and development of specialized precision instruments for many years. We encourage craftspeople, artisans, and DIYers to work smarter, measure better, and increase productivity..
  • EXTRA LARGE, EASY TO READ TRI-MODE DIGITAL DISPLAY - The Fraction+ Digital Caliper switches between inches, millimeters and fractions at the touch of a button..
  • RUGGED STAINLESS STEEL DESIGN - has heavy duty housing and delivers inside, outside, depth and step measurements.
Check Stock

Digital Caliper, Sangabery 0-6 inches Caliper with Large LCD Screen, Auto - Off Feature, Inch and Millimeter Conversion Measuring Tool, Perfect for Household/DIY Measurment, etc

  • ...IFT: High quality digital caliper, the large and easy-to-read LCD display helps you get precise results quickly and easily, auto turn the digital caliper on when you slide the rail and auto shut off after 5 minutes without using. Powered by battery, comes with a pre-installed battery and 2 spare battery for gift..
  • 4 MEASURING MODES: Sangabery digital caliper can be used to measure inside and outside diameter, depth and step with 2 sets of jaws and a probe. Made of high quality, durable plastic carbon fiber composites, this digital caliper is durable and portable..
  • TWO UNIT CONVERSION & ZERO SETTING FUNCTION: One button quick change between two measuring modes: inch and millimeter. The smart design allows you to set zero with an easy touch of a button and start a new measurement at any point of the scale, ideal for differential measuring, satisfying your needs..
  • PRECISE MEASURMENT: Measurement range: 0 - 6"/ 0 - 150mm.
  • Accuracy: ±0.2mm/0.01". Perfect and accurate caliper measuring tool for household/DIY measurement, et. Please note it's not for technical grade extreme accuracy professional use..
  • SERVICE POLICY: Backed by a Sangabery carefree service for every purchase. If you don't like this product, contact us, we promise to re....
Check Stock

Aluminum Miter Saw Protractor, Thinkor 7\ Angle Finder Featuring Precision Laser Engraved Scales for Carpenters, Plumbers and All Building Trades

  • 2 in 1 Digital Protractor: This Digital Protractor features laser-etched metric and imperial measurements on ruler edge,plus accurate digital readout,can measure both angle and length,ideal for use in carpentry, renovation work, or drawing.
  • High Accuracy & Durable Material: Accuracy of this corner angle finder is ±0.2 degree.Durable stainless steel ruler supports measurement between mm and inch,makes it can measure length (0~400 mm/0~7 inch) convenient and accurately.
  • 0-360°Measuring & Locking Function: A hinge mechanism on the miter protractor allows a full 360 degrees to measure inside outside and reverse angles,and a locking screw can hold any angle when use your miter saw to make your cut.The angle finder will automatically display the reverse angle.
  • Zero Setting & Hold Function: Angle woodworking tool can be zeroed at any point in the swing to find relative angle.Display has a hold function to freeze movement for accuracy.Plus the display can be inverted for easy reading.
  • Large LCD Screen & AUTO OFF: The angle finder ruler has a large LCD display to get quick and clear digital readout. Automatically shut down after 5 minutes of inactivity.Powered by coin battery, comes with 2 batteries as gift.
Check Stock

Digital Caliper Measuring Tool 6 Inch Small Vernier Caliper Electronic Micrometer Machinist Woodworking Tools

  • 【Precise and accurate measurement】: Vodlbov digital caliper measuring range 0 - 6''/ 0 - 150 mm.
  • accuracy up to ±0.001"/0.02mm, resolution up to 0.0005"/0.01mm. The body of the dial caliper measuring tool is made of finely polished stainless steel with knurled thumb rollers and locking screws to ensure smooth sliding and accurate positioning when measuring..
  • 【Three-unit conversion and four measurement modes】: The unit conversion is easy to operate, and the three measurement modes of inch/fraction/mm can be quickly switched with one key.
  • you only need to use one measurement tool to measure internal, external dimensions, diameter, depth and steps..
  • 【Zero Setting Function】 Easy to set zero at any point by pressing the zero button, allows you to start a new measurement at once, ideal for differential measurements. Also zero calibration provides precise results when readouts are not accurate..
  • 【Large LCD Display】: Equipped with an easy-to-read large LCD display that displays instant readings digitally, which is more convenient than any vernier caliper or micrometer caliper.
  • Automatic shutdown after 5-8 minutes of no operation to helps you save battery power..
  • 【Wide application】: Professionals and enthusiasts can use. A great choice for me....
Check Stock

Digital Caliper, Adoric 0-6\ Calipers Measuring Tool - Electronic Micrometer Caliper with Large LCD Screen, Auto-Off Feature, Inch and Millimeter Conversion

  • Precise measurement: Measurement range: 0 - 6''/ 0 - 150mm.
  • Accuracy: ±0.2mm/0.01”. Perfect and accurate caliper measuring tool for household/DIY measurement. Please choose stainless steel digital caliper for more accurate measuring.
  • 4 measuring modes: This digital caliper can be used to Measure inside and outside diameter, depth and step with two sets of jaws and a probe. Powered by battery, comes with a pre-installed battery and a spare battery.
  • Inch/mm conversion: One button quick switch between two units: inch and millimeter, definitely save your time. Made of rugged plastic carbon fiber composites, durable and portable.
  • Zero setting function: The smart design allows you to set zero with an easy touch of a button and start a new measurement at any point of the scale, ideal for differential measuring.
  • Large LCD screen & auto off: The large and easy-to-read LCD display helps you get precise results quickly and easily, auto shutdown for saving battery after 5 minutes if without operation.
Check Stock

Fowler 54-100-024-1, Xtra-Range Digital Caliper With 0-24"/600MM Measuring Range

  • ACCURATE MEASUREMENTS: With a nib size of 0.800" for internal measurements, this caliper has an accuracy of ±0.003"/.07mm and a resolution of 0.0005"/.01mm. Perfect caliper measuring tool for machining or household/DIY measurements.
  • 2 MEASURING CAPABILITIES: This digital caliper can be used to measure inside and outside dimensions with 1 pair of jaws and a zero setting for taking intermediate or differential measurements.
  • KNURLED LOCK: Electronic vernier caliper features a knurled lock screw that holds the sliding jaw in position when required and a jaw depth of 4".
  • a fine-adjustment assembly enables precise adjustments when measuring.
  • TWO-UNIT CONVERSION: Quickly change between 2 measuring modes: inch or millimeter. The hold feature freezes the display for later viewing.
  • LARGE LCD SCREEN: High-quality vernier caliper made with a hardened stainless steel frame for long life and resistance to corrosion.
  • easy-to-read, single-value display shows inch or metric units for added versatility when measuring.
Check Stock

Digital Angle Finder Protractor Angle Measurement Tool, 2-in-1 Digital Protractor for Woodworking/Construction/DIY, Stainless Steel 360 Degree with Large LCD Display 7inch

  • ANGLE MEASURING TOOL: There's no more guesswork when it comes to measuring out your angles and cuts, thanks to our metal ruler. Create your layout on a flat surface, grab your slab of wood, your woodworking partner, and start the construction..
  • SLIDING BEVEL: Set and transfer interior and exterior angles quickly and accurately with our level tool. We make it easy for you to build cabinetry, furniture, picture frames, and other wood-inspired projects..
  • DIGITAL ANGLE GAUGE: Four large control buttons provide five functions, including power on/off, reading hold, read reverse angle, flip display, and clear readout. The automatic shut-off feature preserves battery life on our protractor tool..
  • WOODWORKING RULER: This commercial-grade digital sliding T-bevel and digital protractor with an impact-resistant ABS handle features a 360-degree stainless steel blade. The battery-powered gauge includes 1 CR2032 lithium-ion battery..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

Digital Caliper, APMIEK Electronic Digital Caliper, High Accurate 6'' Electronic Vernier Calipers Micrometer Measuring Tool, LCD Screen, Inch Millimeter Conversion for Household/Home DIY Measurement

  • [ PRECISE MEASUREMENT ] Measurement range: 0 - 6''/ 0 - 150mm.
  • Accuracy: ±0.2mm/0.01”. Perfect and accurate caliper measuring tool for household/DIY measurement. Please choose stainless steel digital caliper for more accurate measuring..
  • [ 4 MEASURING MODES ]: This digital caliper can be used to measure inside and outside diameter, depth, and step with two sets of jaws and a probe. Powered by a battery, With a spare button battery..
  • [ INCH/MM CONVERSION ]: One-button quick switch between two units: inch and millimeter, definitely save your time. Made of rugged plastic carbon fiber composites, durable, and portable..
  • [ ZERO SETTING FUNCTION ]: The smart design allows you to set zero with an easy touch of a button and start a new measurement at any point of the scale, ideal for differential measuring..
  • [ LARGE LCD SCREEN & AUTO OFF ]: The large and easy-to-read LCD display helps you get precise results quickly and easily, auto shutdown for saving battery after 5 minutes if without operation..
Check Stock

Antstone Digital Vacuum Gauge HVAC Micron Gauge Vacuum Tester Micron Meter with 6 Units 7/16'-20UNF(1/4' SAE)

  • [Wide Measurement Range] – The measuring range of the vacuum gauge is 99999~0.1Pa(740000~0.75Micron). Accuracy is ±5%(at 20℃)..
  • [Professinal Quality] – The digital vacuum gauge uses a professional Pirani vacuum sensor, which makes the measurement accurate and fast..
  • [6 Units] – This Vacuum Tester has 6 conversion units: Pa, mBar, mmHg, mTorr, InHg, Microns. Units can be converted as needed..
  • [Humanized Design] – 1)When the set target vacuum is reached, there will be a buzzer alarm. 2)It automatically shuts down after 10 minutes of inactivity. 3)The compact tool bag makes it easy to carry. 4)Large screen electronic digital display, high-definition 720p luminous display..
  • [Complete Accessories] – The packing list includes a vacuum gauge, 3 AA batteries, an extension connector, and a portable tool bag..
Check Stock