Top Lathe Turning Tool Set

Accusize Industrial Tools 1/2 x 1/2 x 4 in. (Width by Height by Oal) Hss+5% M35 Cobalt Lathe Tool Bit, 5095-0032

  • M35 Cobalt (HSS + 5%) square lathe tool bits blank, much harder and more durable than M2 high-speed steel lathe tool bits.
  • Ground for heavy-duty cuts on casting and forgings. It has significantly higher wear resistance than M2 HSS。.
  • You may machine it to turning tools to do any lathe turning operations. The possibilities are infinite..
  • Step turning, taper turning, chamfer turning, contour turning, facing, grooving, parting, cut-off, internal threading, outside threading, boring, knurling, etc..
Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

OSCARBIDE 5/8\Shank 7 Pieces/Set Indexable Lathe Turning Tool Holder,CNC Metal Lathe Tools Heavy-Duty for Turning Grooving Threading Nickel Plated Cut Off Set, Tin Coated Carbide Inserts

  • OSCARBIDE 5/8" Heavy-Duty Turning tool set including 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external lathes turning holder, 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder.
  • Turning Holders are made of high quality steel with Nickel Cotated, Cutters are made of carbide with Tin-coated, moistureproof, dust-proof,for long time use.
  • Metal Lathe Cutting Tools Used for semi-finishing/roughing steel, Metal,Fit for Turning,grooving or threading.
  • Replacement Cutter of this kit , please search the Asin of this item: B07R9ZXG5J on Amazon to buy it..
  • 7pcs lathe cutting tool holders with 2pcs of keys packed in a premuim aluminium carrying case,easy to carry.
Check Stock

OSCARBIDE 5/8”Shank 9 Pieces/Set Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Nickel Plated indexable Insert Holders for Turning Grooving Threading Cut Off

  • 5/8” Metal lathe cutting tools includes 1pcs External Parting&Grooving Tool Holder QA10R-30 , 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S10R-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • All metal lathe cutting tools and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

OSCARBIDE 3/4”Shank 9 Pieces/Set Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Nickel Plated indexable Insert Holders for Turning Grooving Threading Cut Off

  • 3/4” Metal lathe cutting tools includes 1pcs External Parting&Grooving Tool Holder QA12R-30, 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S12S-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • All metal lathe cutting tools and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

5/8\ 2PCS CNC Lathe Carbide Indexable Threading Turning Tool Holder SER1616H16 + SEL1616H16 with 2PCS 16ER/IR AG60 BP010 Indexable Carbide Turning Insert Blade

  • PACKAGE INCLUDES : You will receive 1 pieces SER1616H16 5/8”/16mm shank diameter lathe turning tool holder , 1pcs SEL1616H16 5/8”/16mm shank diameter lathe turning tool holder,1pc 16ER AG60 threading carbide turning insert,1pc 16IR AG60 threading carbide turning insert and 2pcs T15 wrenches..
  • Material : The SER/L1616H16 5/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 3mm..
  • If you need more inserts,you can search for ASIN:B07FFR8K53(16ER AG60) or B07FFPFT93(16IR AG60) ..
Check Stock

INTBUYING Inch and Metric Metal Lathe Benchtop Lathe Machine 8"X32" High Precision Mini Table Lathe 1100W Variable Speed 2500rpm MT5 Spindle Taper 110V

  • ...ivided into two adjustable gears, respectively 50-1250rpm and 1250 -2500rpm.The panel can observe the rotation speed in real time, which is flexible and convenient..
  • ⚙【Easy to operate】The Mini Lathe can switch between metric and inch systems without changing gears automatically❥.There are three ways to start turning: manual start, automatic start, delay automatic start.❥Indexing function: you can switch the direction of turning tool through "DIR" button.❥Angles can be cleared with one click.Control panel set parameters after saving and start can realize reciprocating turning function and turning thread..
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

OSCARBIDE 3/4 Shank 7 Pieces/Set Nickel Plated Indexable Lathe Turning Tool Holder,CNC Heavy-Duty Metal Lathe Tools for Turning Grooving Threading Cut Off Holders Set,Tin Coated Carbide Inserts

  • OSCARBIDE 3/4" Heavy-Duty Lathe Turning tool set include 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external turning tools holder, 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder.
  • Turning lathes Holders are made of high quality steel with Nickel Cotated, inserts are made of carbide with Tin-coated, moistureproof, dust-proof,for long time use.
  • Used for semi-finishing/roughing steel,metal,Fit for Turning,grooving or threading.
  • Replacement cutter of this kit , please search the Asin of this item: B07R9ZXG5J on Amazon to buy it..
  • 7pcs lathe cutting holders with 2pcs of keys packed in a premuim aluminium carrying case,easy to carry.
Check Stock

Upgraded Mini Lathe 7\X14\

  • 【GREAT CONSTRUCTION & POWERFUL】- The mini metal lathe is made from high grade iron with a powerful lathe motor:550W. High grade iron construction makes it more sturdy during turning, drilling, threading and cutting processing.Two rails provides smooth and durable moving..
  • 【NEW UPGRADE DESIGN】-This upgrade mini lathe uses metal gear instead a nylon one,increase service life.Adopts aluminum handwheel is more durable than plastic handwheel,and not easy to be damaged.Digital display screen is convenient for you to follow up the processing.Add automatic power-off protection switch to make the operation safer.An extra lamp can help you finish processing in places with insufficient light.We provide one extra gear belt and free 7PCS lathe carbide tool..
  • 【PRECISION DESIGN】-Power metal lathes has large center distance 350mm(13.78") and swing over bed:180mm (7.09"),spindle bore: 21mm(0.82"). A accurate self-centering 3-jaw is supplied,for holding a variety of round or square cylindrical materials stability.The metal lathe features forward and reverse design. The variable speed of MT4 Spindle range 0-2500RPM, two speeds are available for meet your different metal workings: Low Speed 0-1250RPM, High Speed 100-2250 RPM..
Check Stock

Carbide Tipped Wood Turning Lathe Tools Set, 30' 4Pcs Upgrade Sharp Lathe Rougher Finisher Swan Neck Hollower Tools with Durable Free Combination Alloy Handle Include Round Square Inserts

  • 【High Efficiency Tool】MYKASEN lathe turning tools is developed for experienced or novice woodworkers. It can keep sharp for a long time. When the tool becomes dull, the tool can be replaced in just a few seconds, without the need to sharpen it. It is a high-efficiency tool..
  • 【Value Pack】The carbide turning tools set includes 4 types of tools (rough/detail/finishing/) to meet different grinding needs. Equipped with 1 handle and 1 extension handle at the same time, which can be used alternately. We also thoughtfully prepared a pair of protective gloves to ensure your safety during use..
  • 【Dimension and Material】Matched with 4Size Carbide Cutters Inserts(1pcs Square11 × 11 × 2.0mm-30°, 1pcs Round 12 × 2.5mm-30°, 1pcs Round 8.9 × 1.85mm-30°, 1pcs Diamond 10×30mm with Radius Point), We provide high-quality products, hard alloy blades, stainless steel rods, aluminum alloy handles and shells. Everything in this tool set is dynamic and reliable..
  • 【Interchangeable Grip Handle】We provide two smart and interchangeable handles. They can be used alone or connected together. The length of a single root is 280mm, and the combined length can reach 500mm. Clever design. However, for safety reasons, be sure to tighten the two tool rods before use..
Check Stock

OSCARBIDE 1/2\ Shank Nickel Plated Indexable Lathe Turning Tool Holder 7 Pieces/Set,CNC Heavy-Duty Metal Lathe Cutting Tools for Turning Grooving Threading Parting Cut Off Holders Set

  • ❤This carbide lathe turning set Includes two 95° bits (SCLCR 3/8-2 and SCLCL 3/8-2), one 93° bit (SDJCR 3/8-2), one 90° bit (SWGCR 3/8-2.5), one 62.5° bit (SDNCN 3/8-2), one flat threading bit (SER 3/8-2) and one grooving bit (MGEHR 3/8-2). Recommend for CNC and traditional milling machines..
  • ❤Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general metal lathe cutting tools. The set is used for semi-finishing/roughing steel , metal , great for turning, grooving or threading..
  • ❤Each tool holder comes with a TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action. And swap out or rotate the indexable carbide tips to maintain a sharp and precise cut..
  • ❤Metal lathe accessories designed for easy material removal, perfect for aluminum, brass, bronze, cast iron, steel, stainless steel, plastic, titanium and more.The entire set is contained in a premuim aluminium storage case that protects and organizes each tool and stacks and stores easily..
  • ❤TJATSE is a leading manufacturer of production cutting tools for industry. Our goal is to provide to our customers cutting tools that are On Spec and On Time and tha....
Check Stock