Top Led Display Power Module

IRONWALLS Storefront Lights for Business, 120FT 240PCS 3 LED Module Light, SMD5050 Window LED Lights Strip, Multi-Colors Store Advertising Lights for Letter Sign Lighting, Car, Home Decor

  • ✨【Storefront Lights Super Bright for Business】Each LED module of IRONWALLS storefront lighting including 3pcs premium SMD5050 LED beads and the beam angle is up to 120°, which can offer enough brightness to your store front, shop, advertisements or advertising letter signs. Furthermore, there are 7 colors with the light and various modes optional, and all of these are effortlessly controlled by a wireless remote control..
  • ✨【Business Decorative Lights with Sufficient Length】This store window led lights set includes 20pcs x 12 strings per pack, totally 240pcs LED module, the overall length is 120ft/36.5m. Long enough to decorate your storefront window, countertop, advertising sign or anywhere you need attractive & eye-catching light. Besides, the LED module strip light can be cut to any length for your different needs..
  • ✨【Enough Power】Since only 1 set of the controller and power supply to connect too many modules will make your lights gradually darken, there are 3 sets of LED controller and power supply included in the package to ensure all the module has stable and same brightness for you. 12V DC input voltage, 60W per power supply. Consta....
Check Stock

12V to 5V Direct Current Converter Buck Module USB Output Power Adapter Direct Current Power Adapter Converter Regulator Car Power Converter (3)

  • Parameter: these usb buck module input voltage range DC 12V and output voltage default DC 5V, the maximum output current is 3A, no-load current is 10mA and the maximum output power will reach 15W.
  • USB and high conversion: this DC to DC converter module has USB charging ports, DC to DC buck converter has integrated switch thin regulator module, the conversion rate is as high as 96%.
  • Intelligent protection: this 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature and short circuit, it can be auto protection.
  • Wide application: DC converter module 12V to 5V is widely applied for GPS navigation, driving recorder, electronic dog, car radio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED, etc..
  • Warm prompt: the power of devices must be lower than 15W when using this DC to DC converter 12V to 5V, and not compatible with partial Samsung phones.
Check Stock

HiLetgo 2pcs 0.36\ 4-Digit Tube LED Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Arduino UNO R3

  • 4-digit LED display module with LED brightness adjustable and clock point..
  • Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable..
  • The driver IC is TM1637, only two signal lines can make MCU control four Digit 8-segment LED. Can be used to display decimal, letters and so on..
  • Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
Check Stock

12v to 5v Converter Buck Module USB Output Power Adapter Dc Power Adapter Converter Direct Current to Direct Current Regulator Car Power Converter (1)

  • Parameter: these usb buck module input voltage range DC 12V and output voltage default DC 5V, the maximum output current is 3A, no-load current is 10mA and the maximum output power will reach 15W.
  • USB and high conversion: this DC to DC converter module has USB charging ports, DC to DC buck converter has integrated switch thin regulator module, the conversion rate is as high as 96%.
  • Intelligent protection: this 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature and short circuit, it can be auto protection.
  • Wide application: DC converter module 12V to 5V is widely applied for GPS navigation, driving recorder, electronic dog, car radio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED, etc..
  • Warm prompt: the power of devices must be lower than 15W when using this DC to DC converter 12V to 5V, and not compatible with partial Samsung phones.
Check Stock

LCD Touch Panels Touchpanel Analog For DOGXL160 (EA TOUCH160-1)

  • ♛ The Display Module is 5V compatible, use with 3.3V or 5V logic.
  • ♛ The Display Module can support analog S P I and hardware S P I.
  • ♛ The Display Module is designed with one socket for sd card.
  • ♛ With P C B plate (including power supply IC, SD), compatible with 5110 interface.
  • ♛ This is a new 2.8 inch serial S P I color display module without touch function.
Check Stock

IRONWALLS 2 Packs Storefront Light 100ft, 400 Pieces 3 LED SMD5050 LED Module Light for Windows, Colorful Waterproof Window Strip Light Business Decorative Light for Advertising Sign, Store, Party

  • ✨【Super Bright LED Module Light】IRONWALLS rgb led module light is designed with 3pcs premium SMD5050 LED beads for each module, which offers stable & bright lights to your store front, shop, advertisements or advertising letter signs. What’s more, the working voltage of this super bright LED strip lights is DC 12V.
  • working power is 150W (0.72W per module), super low power consumption..
  • ✨【Business Decorative Lights with Sufficient Length】This storefront led lights set includes 2 packs of window led lights 100ft/30m per pack, which the overall length is 200ft/60m. LED module quantity: 20pcs x 10 strings per pack, totally 400pcs LED modules. Long enough to decorate your storefront window, countertop, advertising sign or anywhere you need attractive & eye-catching light. Besides, the LED module strip light can be cut to any length for your different needs..
  • ✨【Color & Mode Adjustable】There are 20 different color forms with the lights: red, white, green, blue, yellow, purple, turquoise, etc.
  • various dynamic modes: Gradual Change 7/3 Colors.
  • Flash. And all of these are effortlessly controlled by a wireless remote control. Different festivals, events, occasions, you can choose different colors to decorate your store or....
Check Stock

Icstation DC 12V Programmable Temperature Controller, Smart Home Incubator Aquarium Car Improvement Mini Digital Thermostat Regulator Switch Module Waterproof Sensor -58℉ to 230℉

  • 【Celsius & Fahrenheit Display】Programmable mini digital temperature control unit with -50℃ to 110℃ (-58℉ to 230℉) measuring range.
  • Thermostat regulator switch module has dual LED display the set temperature and current temperature, with waterproof NTC (10K 0.5%) temperature sensor probe, on-board tactile push button set the trigger temperature and alarming temperature.
  • 12V 1CH relay control the power on/off when the ambient temperature reach the set value, low power sumption <.
  • Easy installing and setting in 30 minutes, splotting size 46 X 26.5mm/1.81 X 1.04inch (L*W).
  • Power Supply: DC12V 200mA, Module Size: 48 X 29 X 32mm/1.89 X 1.14 X 1.26inch (L*W*H).
  • Cable Length: 30cm/12inch, Probe: 2cm/0.8inch.
  • Widely used at smart home, industrial control, automatic irrigation, indoor ventilation and protection equipment. Such as temperature control of production workshop, car or automobile, hatching aquaculture, tobacco industry, printing house, aquarium, fish tank, heater, cooling equipment, bedroom and so forth.
Check Stock

ALAMSCN LED Display Module TM1637 0.36'' 4-Digit 7 Segment 4 Bits Red Digital Tube for Arduino Driver Board (Pack of 4)

  • 4-digit LED display module, red highlights, with adjustable LED brightness and clock point, can display decimals, letters, etc..
  • The driver IC is TM1637, compatible with Arduino..
  • The digital display tube can be controlled with only two signal lines, simple and easy to use..
  • Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
  • 4 M2 screw holes, easy to install, locate and combine modules..
Check Stock

Getting Started with the micro:bit: Coding and Making with the BBC's Open Development Board (Make)

  • Specially designed for Microbit board. This kit includes a keyestudio sensor shield fully compatible with micro bit and other commonly used 37 kinds of sensor modules. It's compatible with both microbit v1.5 and v2, microbit board not include!.
  • Designed to learn electronics programming. Great hands on STEM kit to get started with the micro bit. The product needs to be debugged before use, such as an LED display module. Please use an external power supply and debug the backlight brightness..
  • The kit gives 37 kinds of common sensors, such as Digital LED Module, Analog Temperature Sensor, Photocell Sensor, Ultrasonic Module etc, allow you make a lot of interesting projects like Traffic Light, Magnetic Check, Temperature Test, Joystick Test, Photo-interrupter Test, Alcohol Detection and so on..
  • We have detailed tutorial( included introduction, wiring diagram, test code, driver installation, Example Projects...... Step by step to explain how to use on our wiki page..
  • Solder is very clean, everything is aligned nicely, all boards are well packed after function, voltage, current testing, protected in a beautiful box. Up to FCC and CE Standard: made from environmentally friendly components and materials..
Check Stock

4-20mA Generator, DROK Adjustable Signal Generator, DC 0-10V 0 4-20mA Current Voltage Analog Simulator for Value Adjusting PLC Panel LED Testing

  • AMP & VOLT DUAL SIGNAL GENERATOR: Multifunctional DROK signal generator kit is able to generate ampere & voltage by one module, which generate 0/4 – 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy..
  • CLEAR LED DISPLAY: Our 4-20ma signal generator has bright and clear 3-digit LED digital display screen, which can be used to monitor the output current and voltage. You just need to push the switch below the monitor easy to switch the display..
  • AMP & VOLT DISPLAY CALIBRATION: There are current and voltage display calibrating potentiometer on the back of the module. If the display is accurate, you can calibrate the display value of current voltage by yourself..
  • WIDE APPLICATION: Our signal adapter can be used as signal generator, valve adjustment, inverter control, PLC debugging, panel debugging, LED testing, simulating the output of transmitter..
Check Stock

HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot

  • ☆ Premium Quality: Made of premium material, this lcd module display is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • ☆ TFT LCD Serial Port Module : The lcd display module is a new 2.8 inch serial SPI color display module. Designed with one socket for sd card and PCB adapter for LCD.
  • ☆ Come With PCB Plate: With PCB plate (including power supply IC, SD), pcb display module is compatible with 5110 interface. Resolution: 128x160.
  • ☆ Support Analog & Hardware SPI: This tft display module supports analog SPI and hardware SPI, less I/O port need. It can be driven by 8051 / AVR / PIC /ARM/STM32. It can be driven with at least four IO.
  • ☆ What You Will Get: If you need the document to download, please contact us. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.
Check Stock

ACEIRMC 5pcs 12 Bit WS2812 WS2812B Full Color 5050 RGB Lamp Panel Round LED Ring Lamp Light for Arduino (12 Bit)

  • 4-7V Intelligent reverse connect protection.
  • the power supply reverse connection does not damage the IC The control circuit and the LED share the only power source Control circuit and RGB chip are integrated in a package of 5050 components.
  • form a complete control of pixel point Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate Built-in electric reset circuit and power lost reset circuit Each pixel of the three primary color can achieve 256 brightness display.
  • completed 16777216 color full color display, and scan frequency not less than 400Hz/s Cascading port transmission signal by single line Any two point the distance more than 5m transmission signal without any increase circuit When the refresh rate is 30fps, cascade number are not less than1024 points Send data at speeds of 800Kbps The color of the light were highly consistent, cost-effective.
  • Wattage:0.7W Applications Full-color module, Full color soft lights a lamp strip LED decorative lighting, Indoor/outdoor LED video irregular screen.
Check Stock