Top Led Module Board

Seeed Studio LoRa-E5 Development Kit - Based on LoRa-E5 STM32WLE5JC, LoRaWAN Protocol and Worldwide Frequency Supported.

  • ...ard is an easy-to-use compact development toolset for you to unlock the powerful performance of the LoRa-E5 STM32WLE5JC. It consists of a LoRa-E5 Mini Board, an antenna(EU868/US915), a USB type C cable, Sticker and a 1X12pin male pin headers..
  • ✨【Easy Testing and Rapid Prototyping】The sleep current of LoRa-E5 modules on board is as low as 2.1 uA(WOR mode). It is a user-friendly board for easy testing and rapid prototyping..
  • ✨【Full GPIOs Led Out to Rich Interfaces】LoRa-E5 Dev Board also has rich interfaces, including RS-485, Grove, and etc. Developed to unlock the full functionality of the LoRa-E5 module, LoRa-E5 Mini Dev Board has led out full 28 pins of LoRa-E5 and provides with rich interfaces including Grove connectors, RS-485 terminal, male/female pin headers for you to connect sensors and modules with different connectors and data protocols, saving your time on wire soldering..
  • ✨【Long-distance Transmission Range to 10km】LoRa-E5 Mini Dev Board features an ultra-long transmitting range of LoRa-E5 up to 10km in an open area, extremely low chip power consumption, and user-friendly interfaces. Note: Ideal value in open area..
  • ✨【Global LoRaWAN and LoRa Frequency Plan Supported】LoRa-E5 Mini Dev Board embedded with LoRa-E5 STM32WL....
Check Stock

Power Eject Bind RF IR LED Light Bluetooth Board Module Replacement Part for Microsoft Xbox One S Slim

  • Power Eject Bind RF IR LED Light Bluetooth Board Module Replacement Part for Microsoft Xbox One slim.
  • Tips: This is replacement to replace your old damage Power Eject Bind RF IR LED Light Bluetooth Board, don't include instructions, please install it....
  • Broken your Power Eject Bind RF IR LED Light Bluetooth Board ? don't need to change new device, just buy this item and replace your damage Power Eject....
  • Compatible with: Microsoft Xbox One Slim (Please check your model before your purchase).
  • Shipped by Amazon. Any questions, please contact us first, we will try our best to help you..
Check Stock

5V ESP8266 Dual Channel WiFi Relay Module IOT Smart Home Phone APP Remote Switch with 100M Transmission Distance

  • ON-BOARD ESP-01 WIFI MODULE: The relay board is equipped with on-board ESP-01 WiFi module and high performance microprocessor STM8S103..
  • UART DEBUG INTERFACE: The relay has reserved UART debug interface and STM8 SWIM program download interface..
  • SMART CONFIG TECHNOLOGY: The module uses smart config technology to complete the account and password configuration on the APP ESP-01 WiFi module on the mobile phone, and configure the username and password memory functions..
  • ON-BOARD 5V RELAY: This relay module adopts On-board 5V,10A250V AC 10A30V DC relay, which can continuously pull 100,000 times with diode discharge protection and short response time..
  • WORKING STATUS INDICATOR: The module has board mode selection and real-time working status indicator..
Check Stock

Comimark 1Pcs GY NEO 6MV2 GPS Module NEO-6M GY-NEO 6MV2 Board with Antenna for Arduino New

  • This is GY NEO 6MV2 GPS Module NEO-6M GY-NEO6MV2 Board with Antenna for Arduino New，The default baud rate: 9600..
  • Non-brand New Chip, but the use of the same effect.，Module with antenna, mini size with strong signal..
  • EPROM save the configuration parameter data when power down，With data backup，With LED signal lights，Compatible with various flight control....
  • Package Included:1Pcs GY NEO 6MV2 GPS Module NEO-6M GY-NEO6MV2 Board with Antenna for Arduino New(If the number of products received is incorrect,....
  • We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution..
Check Stock

DC 4.5-30V 10Amp Blinking Flasher Module

  • This is a simple and practical blinking flasher module, the ON and the OFF duration can be adjusted separately. The blinking flasher module is suited for both resistive and slightly inductive loads. This blinking flasher module is ideally suited for driving for example LED lamps, hazard lights, warning signs, safety beacons, DC light bulbs, etc .....
  • Operating voltage DC 4.5 to 30V. Maximum current: 10 Amp. Maximum load 300 Watts/at DC 30V, 120 Watts/at DC 12V. (NOTE: this product no step-up, step-down or inverter function, only for DC load).
  • Time-ON 0.01 to 15 seconds and Time-OFF 0.01 to 15 seconds adjustable. The output ON - OFF - ON – OFF… cycle alternates..
  • Two precise 25-turn adjustable potentiometers, you can use a screwdriver to easily adjust the ON and OFF time you need. With LED indication for output status..
  • Compact plastic case and wires connects for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..
Check Stock

ESP32 Development Board Module High Precision Test Burn Fixture for ESP-WROOM-32 Minimum System

  • 【Small Batch Burn 】The fixture doesn't contain ESP32 module, which is suitable for burning test board of ESP-WROOM-32 module.
  • 【Test Burn Fixture】The pin has good contact performance, ensure stable working.
  • 【Precise Burn Fixture】All IO port have led can be used as the minimum system board or small batch burn with fixture.
  • 【Precision Process】This burn fixture is adopted of high quality electronic components, and precision process, ensure for the durability.
  • 【Stable 】ESP32 is a safe, reliable, and scalable to a variety of applications,and Ultra-Low power consumption, works perfectly.
Check Stock

KEYESTUDIO 37 Sensors in 1 Box Starter Kit for BBC Micro bit with Tutorial (Without Microbit Board), Compatible with V1.5, V2 Microbit Sensor Kit Accessories Programming Gift for Kids Adults

  • Specially designed for Microbit board. This kit includes a keyestudio sensor shield fully compatible with micro bit and other commonly used 37 kinds of sensor modules. It's compatible with both microbit v1.5 and v2, microbit board not include!.
  • Designed to learn electronics programming. Great hands on STEM kit to get started with the micro bit. The product needs to be debugged before use, such as an LED display module. Please use an external power supply and debug the backlight brightness..
  • The kit gives 37 kinds of common sensors, such as Digital LED Module, Analog Temperature Sensor, Photocell Sensor, Ultrasonic Module etc, allow you make a lot of interesting projects like Traffic Light, Magnetic Check, Temperature Test, Joystick Test, Photo-interrupter Test, Alcohol Detection and so on..
  • We have detailed tutorial( included introduction, wiring diagram, test code, driver installation, Example Projects...... Step by step to explain how to use on our wiki page..
  • Solder is very clean, everything is aligned nicely, all boards are well packed after function, voltage, current testing, protected in a beautiful box. Up to FCC and CE Standard: made from environmentally friendly components and materials..
Check Stock

HiLetgo TF Card U Disk Play MP3 Decoder Player Module with Audio Amplifier Audio Decoding Player Module Micro USB 5V Power Supply

  • With high quality, onboard 2W single channel power amplifier..
  • 4 buttons on the board for setting operation..
  • Support MP3 format, playing power on automatically, LED indocator light when module is working..
  • Mp3 lossless decoders power amplifier Mp3 player module Mp3 decoder board support TF card and USB..
  • Support TF Card (mobile phone memory card), U disk playback mode With the speaker terminals without welding..
Check Stock

DVD Disc Drive Laser Lens Board Module Replacement Compatible with Nintendo Wii Consoles

  • DVD Disc Drive Laser Lens Board Module Replacement Compatible with Nintendo Wii Consoles.
  • Tips: This is DVD Disc Drive Laser Lens Board Module replacement to replace your old damage DVD Disc Drive Laser Lens Board Module, don't include instructions, please install it by a professional technician..
  • Broken your DVD Disc Drive Laser Lens Board Module, don't need to change new machine, just buy this item and replce your damage DVD Disc Drive Laser Lens Board Module, let your Device work again again..
  • Compatible with: Nintendo Wii Consoles (Please check your machine model before your purchase).
  • Product is fragile, easy to be damage during shipping. So if there are any questions, please contact the seller for help first, we will try our best to help you..
Check Stock

SUKRAGRAHA Infrared LED Light Board Module 3W 850 IR High Power Night Vision Infrared Illuminator Adjustable Resistor for Raspberry Pi Camera Night Vision Module (2pc)

  • Package Includes: 2 X Infrared LED Light Board Module.
  • 3W high-power 850 infrared LED, designed to work for Raspberry Pi camera.
  • Onboard photoresistor, ambient light detector.
  • Allows adding night vision function to RPi Camera (E) or RPi Camera (F).
Check Stock

ELP 100fps USB Camera Night Vision FHD 1080P Infrared Webcam,Wide Angle 3.6mm Lens Auto IR Web Cam,2mp USB2.0 Day Night Security Camera with Mini Housing,High Speed 60fps 100fps USB Camera for Most OS

  • Model:ELP-USBFHD05MT-KL36IR,Day/Night Vision: IR-CUT Filter switched in and out automatically based on light condition (only visible light during the daylight and infrared sensitivity during the night with 850 IR LEDs on).With IR Cut and IR LED for day&night whole day view:ELP usb camera module with 24pcs IR leds,Auto IR usb camera module with photosensitive resistor on the camera board,when the surrounding environment becomes dark,the ir LED will turn on antomatically,On the contrary,it will be closed automatically,too..
  • FHD Resolution: This camera adopts 2MP OV2710 sensor for sharp image,Max. resolution: 1920*1080,support:1280 (H) x 720 (V),640 (H) x 480 (V) USB2.0 Por for fast,smoother, embedded USB camera module convenient compatible for all kinds of device..
  • With 10PCS IR LED for whole day and night image view,Camera support night vision with UVC for all kinds of system,Plug&Play,UVC-compliant, just connect the camera to PC, laptop, Android device or Raspberry Pi with the USB cable without extra drivers to be installed..
  • YUY2 and MJPEG compression format optional:ELP 2megapixel night vision usb camera module with MJPEG/YUY2 compression format optional help to save more storage space,streaming with less demand on your computer provides faster and sm....
Check Stock

Dedicated Aluminum Heatsink for Raspberry Pi Compute Module 4 (CM4), Notched for Antenna

  • Dedicated Aluminum Heatsink for Raspberry Pi Compute Module 4：Dedicated aluminum heatsink, corrosion / oxidation resisting, better heat dissipation.
  • For CM4 & based board：matching with the CM4 on size and mounting holes, fast heat dissipation.
  • Notched for antenna section：no hindrance to the antenna.
  • Using with base board: for Official Compute Module 4 IO Board or Waveshare Compute Module 4 PoE Board.
  • Note: Only HEATSINK,not include base board.
Check Stock