Top Long Anchor Bolt

1 Pcs 12mm Screw Pin Anchor Shackle 1/2 Inch 304 Stainless Steel Shackle for Rigging, Chains Wirerope Lifting.

  • 1/2 Inch Anchor Shackle: Made of 304 stainless steel, one-way screw, bolt design, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, Connect loose ends of cables, chains, tow straps and snatch blocks..
  • Anchor Shackle Size: 1 Pcs 1/2"(12mm) Bow Shape Screw Pin Anchor Shackle, one-way screw, bolt design, Max Open Width: 1" (25mm), Working Load Limit: 1400kg / 3086lbs, Breaking Load: 5500kg / 12125lbs..
  • Easy to Use: Make sure that the pin is properly screwed into the bow shackle hole, tighten it by hand, it with a wrench or other suitable tool, The best use of connection accessories, is perfect for use with ropes..
  • Wide Application: Screw pin anchor shackles, used for sailing hardware, towing, hiking and other outdoor sports, Great for boats, jeeps and other applications for tie downs, towing, could be also used in loading and unloading of goods..
  • Hardware Parts: These shackles hooks for anchoring, binding, rigging all types of hardware, always used together with a expansion hook and stainless steel chain, apply to a variety of boat or household applications..
Check Stock

(100) Drop-in 1/4 x 1 Concrete Expansion Anchor 3/8 Drill Zinc Plated 1/4-20

  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant.
  • BOLT EXPANDS ANCHOR-No setting tool required.
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications.
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters.
Check Stock

Prime-Line 9071458 Lag Shields, Short, 3/8 inch X 1-3/4 inch, Zinc Alloy, (50-pack)

  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant.
  • BOLT EXPANDS ANCHOR-No setting tool required.
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications.
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters.
Check Stock

Double Expansion Anchors for Masonry, Concrete, Brick or Block Zamac Zinc 1/4\-20 x 1-1/4\ Qty 10

  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant.
  • BOLT EXPANDS ANCHOR-No setting tool required.
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications.
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters.
Check Stock

T Anchor, 1/4 x 3 1/4, PK4

  • Price For: Each Includes: Body, Nut, Washer Meets/Exceeds: G.S.A. FF-B-588C, A.N.S.I. A58.1, A.S.T.M. B-633 Anchor Type: Toggle, Gravity Activated Type: T-Anchor Box Count: 4 per pack Head Style: Nut Ultimate Shear (Lb.): 1500 Ultimate Pullout (Lb.): 700 Thread Length (In.): 1.85" Size (In.): 1/4 x 3-1/4 Size: 1/4 x 3-1/4" Shank Length (In.): 3-1/4.
  • Max. Work Thickness (In.): 2-1/2 Hole Dia. (In.): 1/4 Grip Range (In.): 1 - 2-1/2 Bolt Dia. (In.) / Threads/In.: 1/4 - 20 Anchor Length (In.): 3-1/4 Anchor Dia./Drill Bit Sz. (In.)/TPI: 1/4 Country of Origin (subject to change): United States.
Check Stock

T Anchor 3/8 x 4 1/2 PK4

  • Price For: Each Includes: Body, Nut, Washer Meets/Exceeds: G.S.A. FF-B-588C, A.N.S.I. A58.1, A.S.T.M. B-633 Anchor Type: Toggle, Gravity Activated Type: T-Anchor Box Count: 4 per pack Head Style: Nut Ultimate Shear (Lb.): 3000 Ultimate Pullout (Lb.): 1000 Thread Length (In.): 1.8" Size (In.): 3/8 x 4-1/2 Size: 3/8 x 4-1/2" Shank Length (In.): 4-1/2.
  • Max. Work Thickness (In.): 3-1/8 Hole Dia. (In.): 3/8 Grip Range (In.): 7/8 - 3-1/8 Bolt Dia. (In.) / Threads/In.: 3/8 - 16 Anchor Length (In.): 4-1/2 Anchor Dia./Drill Bit Sz. (In.)/TPI: 3/8 Country of Origin (subject to change): United States.
Check Stock

T Anchor 3/8 x 3 3/4 PK4

  • Price For: Each Includes: Body, Nut, Washer Meets/Exceeds: G.S.A. FF-B-588C, A.N.S.I. A58.1, A.S.T.M. B-633 Anchor Type: Toggle, Gravity Activated Type: T-Anchor Box Count: 4 per pack Head Style: Nut Ultimate Shear (Lb.): 3000 Ultimate Pullout (Lb.): 1000 Thread Length (In.): 1.8" Size (In.): 3/8 x 3-3/4 Size: 3/8 x 3-3/4" Shank Length (In.): 3-3/4.
  • Max. Work Thickness (In.): 2-1/2 Hole Dia. (In.): 3/8 Grip Range (In.): 1-7/8 - 2-1/2 Bolt Dia. (In.) / Threads/In.: 3/8 - 16 Anchor Length (In.): 3-3/4 Anchor Dia./Drill Bit Sz. (In.)/TPI: 3/8 Country of Origin (subject to change): United States.
Check Stock

BoltHold - AK-4 Asphalt Anchor & Anchoring Cement Kit - Four 1500lb Pull Rated SP10-38 Chemical Anchors 5/8 x 6 with EPX2 Anchoring Cement - For Installation of Sheds Carports Bike Racks & More

  • ASPHALT ANCHORING KIT: Stop wasting time pouring concrete! BoltHold's industrial in-ground anchors and anchoring grout allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. This AK-4 Kit includes four SP10-38 (3/8"-16 x 6") Zinc-Plated Anchors with a pre-installed 1" long bolt and 1" diameter washer and two bags of EPX2 cement-based Anchoring Grout..
  • LIGHT-TO-MEDIUM LOAD: Pull rated for 1,500 lb! Designed for a light-to-medium load, BoltHold SP10-38 chemical anchors resist at least 1,500 pounds pull and 1,000 pounds of moderate shear force at ground level. Rated for 200 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
  • LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installi....
Check Stock

TOGGLER SNAPTOGGLE BDS Toggle Anchor 304 Stainless Steel Channel Made in US,3/8 to 2-1/2 Grip Range For 1/2 -13 UNC Fastener Size Pack of 25

  • Toggle anchor installs behind 3/8"- to 2-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/2"-13 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 275 lb. in 1/2" drywall with a 1/2"-13 UNC bolt, and 2,038 lb. (material failure) in concrete block with a 1/2"-13 UNC hardened bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

CONFAST 3/8\ Lag Shield Anchor Long (12 per Box)

  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration.
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place.
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications.
  • Ultimate tensile strength is 1,190 lb. in 2,000-psi concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

Qty 12 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor

  • Required hole diameter equals anchor diameter.
  • variation in hole size can be accommodated by turning the expander nut.
  • the bolt is simply re-inserted and torqued to obtain original holding power (the nut stays in the hole).
  • Bolt can be removed and re-used with a new nut after cleaning and lubricating the threads.
  • strength - the highest shear strength of any expansion anchor.
Check Stock

Diversified Fastening Systems GCPT14134 T Anchor 1/4 x 1 3/4 PK4

  • Price For: Each Includes: Body, Nut, Washer Meets/Exceeds: G.S.A. FF-B-588C, A.N.S.I. A58.1, A.S.T.M. B-633 Anchor Type: Toggle, Gravity Activated Type: T-Anchor Box Count: 4 per pack Head Style: Nut Ultimate Shear (Lb.): 1500 Ultimate Pullout (Lb.): 700 Thread Length (In.): .6 Size (In.): 1/4 x 1-3/4 Size: 1/4 x 1-3/4" Shank Length (In.): 1-3/4.
  • Max. Work Thickness (In.): 1 Hole Dia. (In.): 1/4 Grip Range (In.): 1 Bolt Dia. (In.) / Threads/In.: 1/4 - 20 Anchor Length (In.): 1-3/4 Anchor Dia./Drill Bit Sz. (In.)/TPI: 1/4 Country of Origin (subject to change): United States.
Check Stock