Top Low Profile Servo Board

Zoty 15x21x4mm Bearing 6702-2RS Rubber Sealed Hobby RC Vehicle Servo Bearings Pack of 10pcs

  • ABEC-3 Grade Hobby RC Vehicle Servo Bearings.
Check Stock

3pcs M0090 9G Metal Gear Mini Servos 1.9KG Torque RC Servo Analog Servo Motor Micro Servo for RC Model Car Robot Flight Controller Toy Product

  • ✔️【High Speed Servo】Torque: 1.7kg-cm/4.8V.
  • 0.08sec/60°/6.0V Mini Analog Servo M0090 13g/1.9kg-cm/0.08sec.
  • ✔️【High performance】rc helicopter servo.Precision metal gears forms a strong and solid framework..
  • ✔️【High-strength】M0090 RC Servo Suitable for use in planes, helis, cars and robots. Mini Analog Servo M0090 13g/1.9kg-cm/0.08sec. Interface Type: JR .
  • ✔️【Metal Gear Servo Motor】Over-spec refined design out performs ordinary micro size servo.Weight:13g / 0.5oz (not include wires weight).
  • Dimension:22.4*12.5*22.8mm³ / 0.9*0.5*0.9in³.
  • ✔️【Good Quality Servo】Strict production and quality control of plastic components.High reliability,good stability,strong adaptability, Low noise,small vibration,smooth operation long life.
Check Stock

FOSA EMAX ES9051 4.3g Digital Micro Servo Plastic Gear 0.8kg Torque Servo RC Parts for 3D F3P RC Airplane, for FUT/JR Plug

  • Micro servo motor is designed for 3D F3P airplane. Easy to install and disassemble.
  • Digital micro servo is fast and precise to react, which can achieve the best control state when used with RC models.
  • Mini gear servo is high efficiency, low noise and low power consumption during operation.
  • Metal gear rc servo Gear is made of high-quality materials, very wear-resistant, light weight, can not be easily damaged.
  • Plastic gear is shock resistant and durable, practical, stable performance.
Check Stock

FEETECH 35KG Servo Motors FT5330M High Torque RC Servo Full Metal Gear Digital Servo,Aluminium Case, Control Angle 180° for Scx24,1/8 1/10 RC Cars,TRAXXS x4, Baja, RC4WD, GTR and More

  • BRAND SERVO-FEETECH 35KG digital rc servo, high sensitivity, stable and low-noise. High quality PA aluminum case, more sturdy. Hard iron shaft, provide higher stability..
  • EXCELLENT SERVO PERFORMANCE-High precise upgrade metal gear, with better accuracy and longer service life.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • UPGRAD SERVO-Upgraded high torque rc servo, high rotation – well-controlled 180° (at 500→2500μsec) large steering angle, when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable. React quickly and accurately. No stuck problem..
  • MATCHING SERVO ACCESSORIES-This mini micro servo is equipped with metal mount and servo horn, replaces the original plastic accessories. No need to order accessories with more trouble..
  • WIDE-APPLICATION-Perfect for Axial scx24, 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system. The servo size is 55X20x43mm..
Check Stock

FURITEK Iguana 20A/40A Brushed ESC for AXIAL SCX24 with Bluetooth Combo

  • The FURITEK IGUANA esc is designed to work with BOTH stock brushed motor and sensored/sensorless brushless motors of your favorite on the Axial SCX24 crawlers..
  • Designed with FOC (Field-oriented control) technology, it provides insane slow speed with powerful stable torque, low noise, high efficiency, and has a high-speed dynamic response..
  • And with bluetooth module option, you can run telemetry and all amazing parameters on smart phone apps..
  • The difference between this IGUANA esc and TEGU Main Board for Axial SCX24 Crawler is that the TEGU main board includes servo out for extra application and LED control capability which the IGUANA does not have. The IGUANA also has smaller BEC than the TEGU..
  • - Support sensorless brushless DC and brushed DC motor (config via app, default is brushed).
Check Stock

Mad Catz The Authentic R.A.T. AIR Wireless Power Gaming Mouse with Charging Pad - Black

  • ...ow-friction hard side designed to fit a variety of playstyles.
  • 16” diagonal of available playing space on activation board.
  • dimensions: 14.06 in x 11.18 in x .24 in.
  • Multi-button functionality for maximum precision and control: Scroll wheel, Left click, Right click, DPI button, Forward, Backward, Precision button, Profile button, Side scroll wheel - customize within software for extra functionality.
  • Precision button instantly increases or decreases sensitivity - ideal for in-game sniping.
  • F.L.U.X. software lets you customize your settings - create unlimited user profiles, program buttons, customize lighting and more.
  • works with Windows Operating Systems only, available for download..
  • Store your favorite 4 user profiles on mouse using on-board memory - quickly switch using Profile button.
  • Industry-leading OMRON switches - 50 million click lifetime.
  • Adjustable palm rest - side button releases palm piece for customizable comfort.
  • extended wing thumb rest - ergonomically designed to be comfortable even through hours of game play.
  • Low friction PTFE glide feet provide smooth, fast movement without dragging.
  • chameleon lighting strip - lighting strip illuminates activation board and is configurable using inclu....
Check Stock

6Pcs ShareGoo JR Style Servo Splitter Cable, 2.75' Servo 1 Male to 2 Female JR Y Harness Y Cable Extension Wire for RC Models Car Airplane Helicopter Drone Boat

  • Used for RC cars trucks airplanes helicopters rc boat servo connection, receiver connection and flight control board..
  • This servo Y-cable allows you to control two servos with one radio channel..
  • Material: 22AWG silicone wire.Wire Length: 7CM/2.75".
  • 3Pin wire cable.Male JR plug to 2 Female JR plug Y Harness cable..
  • Pack of 6 JR style servo splitter cable,unique design, professional quality JR style connectors..
Check Stock

AGFRC 55KG Digital-Steering-Servo High-Torque Programmable - Full Metal Gear Brushless Servo for 1/8 1/10 RC Models, Control Angle 180° (A86BHM)

  • 【UPGRADED & PROGAMMABLE】This upgrade high torque servo is programmable by the AGF-SPV2/V3 servo programmer (not Include) to change the torque, speed, angle, etc..
  • 【HIGH PRECISION & MONSTER TORQUE】Stable, low noise, dust-proof, advanced linearity and accuracy. The maximum torque of this steering servo is up to 55kg/cm (764oz-in) @8.4V and speed up to 0.110sec/60°@8.4V. Size: 40*20*41.5mm(1.57*0.79*1.63in).
  • 【HIGH QUALITY & PERFORMANCE】Standard 55KG high torque servo equipped with patent reinforced steel gear with PINS, three ball bearing, full Aluminium housing with groove surface for fast heat dissipation, accuracy with precision potentiometer..
  • 【APPLICATION & 180 DEGREE ROTATION】AGFRC RC steering digital servo motor uses high-precision production technology to reduce production deviation and improve product tightness, ideal for 1/8 1/10 Buggy /Monster Trucks/RC car/boat/plane/helicopter/robot..
  • 【SATISFIED CUSTOMER SERVICE】Please read the detail description of this RC car brushless servo motor first, if any ideas about our high torque digital servo, contact us first & We will provide you a better solution, and make you satisfied..
Check Stock

PNY NVidia Quadro K1200 (Low Profile) PCIE 2.0 x 16 DP Graphics Cards VCQK1200DP-PB

  • Compatibility with system enclosures ranging from compact SFF desktops to traditional desk side ATX towers.
  • Up to 2x the graphics performance of competing products.
  • Large 4GB GDDR5 GPU memory capacity and memory interface is 128 bit.
  • Supports AutoCAD and SOLIDWORKS advanced photorealistic rendering.
  • Superior CAD graphics performance for value line business PCs.
  • Support for four monitors including 4K displays for signage applications.
  • Highest Highest performance low-profile professional graphics board currently available low-profile professional graphics board currently available.
Check Stock

AGFRC 100KG High-Torque 1/5-Scale RC-Servo-Motor - 12V Waterproof Metal Gear Brushless Servo for 1/5 RC Models, Control Angle 180° (A280BVSW(3S/4S))

  • 3S / 4S LiPo Direct Connection - 1/5 scale high torque servo is with 3S / 4S LiPo high voltage application, available to connect with 3S / 4S LiPo battery directly without BEC. Ideal for 1/5 scale buggy, monster trucks, RC car, crawler, boat, plane, helicopter, on road, off road, etc..
  • IP67 Waterproof Design - Stable, low noise, dust-proof, advanced linearity and accuracy. With IP67 waterproof design, which makes servo still work normally when immersed up to 1 Meter depth of 30 minutes. Size: 65.8*30.0*59.0mm (2.59 x 1.18 x 2.32 in).
  • High Precision & Monster Torque - AGFRC 1/5 scale giant steering digital servo motor uses high-precision production technology to improve product tightness. The maximum torque of this HV servo is up to 125kg - cm (1738 oz-in) @ 16.0V and speed up to 0.080sec / 60° @ 16.0V..
  • High Quality & Performance - Waterproof 100KG high torque metal gear servo equipped with patent reinforced steel gear with pins, five ball bearings, full CNC Aluminium housing with groove surface for fast heat dissipation, accuracy with precision magnet angle sensor..
  • Satisfied Customer Service - Please read the detail description of this waterproof brushless servo first, if any ideas about our servo, contact us first & we will provide you a better solut....
Check Stock

ZOSKAY 1X DS3218 Update servo 20KG Full Metal Gear Digital servo Baja servo Waterproof servo for Baja Cars(Control Angle 180)

  • DS3218 20KG Large Torque Digital Servo with precision potentiometers,stable,low noise,waterproof: IP66.
  • High-precision metal gears with hard anodizing, CNC aluminium middle Shell, Dual ball bearings.
  • Large Torque&speed – 18.5kg.cm (0.16S/ 60°)@5V,maximum 21.5 kg.cm (0.14S/60°)@6.8V Operating travel:180°（PWM 500-2500μs）.
  • High performance digital standard servo for any crawler.
  • and for robot joint activities,TRX 4 Traxxas， SMT10 Mega Truck， SCX10 II，ARRMA Nero 1/8…..
  • Package Included: 1 x Digital Servo 1.58x0.79x1.60inch (40x20x40.5mm).
  • Weight: 60g (2.12oz) 1 x 25T Adjustable metal servo arm.
Check Stock

Carved-Top Table

  • A modern low profile coffee table with a functional side compartment for all your storage needs.
  • Product is made of medium fiber board construction.
  • side compartment with flip down door panel.
  • To clean, use damp cotton cloth to wipe clean.
  • Measures 47.20-inch wide by 21.70-inch deep by 12.80 inch high.
  • 30-days hassle-free replacement parts warranty.
Check Stock