Top Low Torque Driver Shaft

Zipper Gap Buckle compatible with Neverfull Pochette Little Pouch Chain Strap Connective Buckle (Gold)

  • 【30 Series Torque Converter Clutch Kit】 This 3/4" Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts..
  • 【For your convenience this kit comes with both sprockets】This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life..
  • 【The Belt Feature】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
  • 【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
  • 【Go Kart Torque Converter Kit comes with】1 x 3/4" Drive....
Check Stock

COMOWARE 20V Cordless Drill, Electric Power Drill Set with 2 Batteries & Charger, 3/8” Keyless Chuck, 2 Variable Speed, 280 In-lb Torque, 18 Position and 22pcs Drill/Driver Bits

  • 【20 Voltage & 2 Variable Speeds】Higher voltage means more torque-spinning strength to overcome resistance. 2 variable-speed ( 0-350 & 0-1350 RPM) power drill with an adjustable clutch gives you versatility for drilling different materials and using a variety of bits. The low speed is for driving screws, the high speed for drilling holes..
  • 【18+1 Position Clutch & 280 In-lb Max Torque】 The drill's clutch gives a user more control over the amount of torque applied to a screw to prevent sinking a screw too deep, stripping out the head of a screw or even breaking a screw shaft. 18 Torque allows for various tasks and additional 1 torque for drilling..
  • 【2 x 1500mAh Batteries & 60min Fast Charger】20V 1500mAh Lithium-Ion battery packed with higher capacity indicator let you finish your job smoothly with long lasting performance. 1.5A 1-hour fast charger keeps your drill constantly running..
  • 【3/8” Keyless Metal Chuck & LED Work Light】A 3/8-inch cordless drill accepts a wide range of bits, making it versatile for common tasks around the house. Drill has keyless chuck that you can tighten or loosen by hand. The Forward/Reverse switch allows you to either screw or replace/remove bits on your purposes. LED Light for increased visibility in enclosed ....
Check Stock

Klein Tools 631M Tool Set, Magnetic Nut Drivers Sizes 3/16, 1/4, 5/16, 11/32, 3/8, 7/16 and 1/2-Inch on 3-Inch Full Hollow Shaft, 7-Piece

  • Nut Drivers' full hollow shaft designed with Rare-Earth magnetic tips facilitate work on long bolt applications.
  • Tool Set contains Nut Driver Cat. Nos.: 630-3/16M, 630-1/4M, 630-5/16M, 630-11/32M, 630-3/8M, 630-7/16M, 630-1/2M.
  • Cushion Grip handles allow for greater torque and comfort and internal flanges provide solid, twist-resistant shaft anchor.
  • Tip-Ident quickly identifies nut driver hex orientation and size by color coding the handle ends so you can easily engage the nut driver with the fastener.
Check Stock

Hyper Tough 50 Piece Drill and Driver Bit Set with Bubble Level in Red Carrying Case

  • [Multifunctional Battery Pack] : 20V 1.5Ah Lithium-ion battery pack with USB output compatible for phone charging and real-time capacity indicator..
  • [15+1 Position Clutch] : 15+1 torque (280 In-lbs) settings provide precise control for driving in/out screws to prevent stripping, and drilling into wood, ceramics, plastics, and even metal with ease. Max torque for drilling into wood 13/16-Inch(20mm) or steel plate 3/8-Inch (10mm)..
  • [Ergonomic Design] : Compact and lightweight design with superior motor minimize fatigue in most daily screwing and drilling tasks, the rubber-covered handle provides a comfortable grip for being breezily operated in one hand..
  • [Efficient Working] : A flexible shaft could be used in some places where driver bits are hard to reach.
  • LED light illuminates dark working areas.
  • Variable speed（0-550RPM）with electric brake function provides precise operation..
  • [What's Included] : 10pcs drill bits, 10pcs driver bits, an extension bar and a magnetic flexible shaft for hard-to-reach places, US-based customer support..
Check Stock

Klein Tools 32561 Multi-Bit Screwdriver / Nut Driver, 6-in-1 Stubby Screwdriver with 2 Phillips, 2 Slotted Bits, 2 Nut Drivers

  • Multi-bit stubby screwdriver / nut driver with compact interchangeable shaft holds 4 universal tips and converts to 2 nut driver sizes.
  • INCLUDES: non-magnetic nut driver sizes 1/4-Inch (6 mm) and 5/16-Inch (8 mm) and Screwdriver sizes #1 and #2 Phillips, 3/16-Inch (5 mm) and 1/4-Inch (6 mm) slotted.
  • Compact design features standard 1-1/4-Inch (32 mm) shaft allowing easy access to tight work spaces.
  • Cushion-Grip handle provide greater torque and comfort.
  • Replacement bits available: Cat. Nos. 32396, 32398, 32412.
Check Stock

MOOSUN GO-KART TORQUE CONVERTER CVT CLUTCH 3/4" COMET TAV2 30-75 218353A Manco 12T #35 and 10T #40 41 420

  • 【30 Series Torque Converter Clutch Kit】 This 3/4" Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts..
  • 【For your convenience this kit comes with both sprockets】This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life..
  • 【The Belt Feature】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
  • 【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
  • 【Go Kart Torque Converter Kit comes with】1 x 3/4" Drive....
Check Stock

COMOWARE 20V Cordless Drill, Electric Power Drill Set with 1 Batteries & Charger, 3/8” Keyless Chuck, 2 Variable Speed, 266 In-lb Torque, 17+1 Position and 34pcs Drill/Driver Bits

  • 【20 Voltage & 2 Variable Speeds】 Higher voltage means more torque-spinning strength to overcome resistance. This 2 variable-speed ( 0-350 & 0-1300 RPM ) cordless drill with an adjustable clutch gives you the versatility for drilling different materials and using a variety of bits. The low speed is for driving screws, the high speed is for drilling holes..
  • 【25+1 Position Clutch & 266 In-lbs Max Torque】 This cordless drill's clutch provides precise control for drilling, which helps to prevent sinking a screw too deep, stripping out the head of a screw or even breaking a screw shaft. 17-Torque allows for various applications and additional 1-torque for drilling..
  • 【1500mAh Batteries & 60min Fast Charger】20V 1500mAh Lithium-Ion battery packed with higher capacity indicator lets you finish your job smoothly with long lasting performance. 1.5A 1-hour fast charger keeps your drill constantly running..
  • 【3/8” Keyless Metal Chuck & LED Work Light】A 3/8-inch cordless drill accepts a wide range of bits, making it versatile for common tasks around the house. Drill has keyless chuck that you can tighten or loosen by hand. The Forward/Reverse switch allows you to either screw or replace/remove bits for your purposes. LED Light for increased visibility....
Check Stock

212CC Torque Converter 6.5 HP 3/4 Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain Predator Driver Pulley Replacement Set - 30 Series

  • 【Brand new predator 212cc 6.5 hp go kart torque converter clutch kit】 This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts..
  • 【TAV2 30 Series Go Kart Clutch Kit】This torque converter fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2-8hp. 30 series Asymmetrical design. Bring your off-road machine to life..
  • 【30 Series Toruqe Converter Belt for 6" Driven】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
  • 【This clutch will help you get more power out of your small engine by reducing engine load】 A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
  • 【For your convenience this kit comes with】1 x 3/4" Driver Pulley.
  • 1 x 10 Tooth Sprocket for #40/41/420 Chain.
  • 1 x 12 Tooth Sprocket for #35 Chain(Chain not inclu....
Check Stock

Kohree High Torque DC Motor, 12V 60 RPM Electric Gear Box 37mm Centric Output Shaft Gearbox Motor

  • Benefiting from high torque and low noise..
  • This motor is solidly constructed and ready to install in numerous applications.DescriptionSpecifications:.
  • 1 x Mini 12V DC 60 RPM High Torque Gear Box Electric Motor.
Check Stock

DAEWOO Lithium Ion Cordless Drill 20V Variable Speed 0-1500 RPM w/ 21 Accesories

  • What is Included: 10pcs drill bits, 10pcs driver bits, an extension bar for sticking on fastener and a magnetic flexible shaft for hard-to-reach....
  • Maximum power with 20V Lithium Ion Rechargable Battery Pack.
  • Ergonomic Design: Compact and lightweight design with superior motor minimizes fatigue in most daily screwing and drilling tasks.
  • Efficient Working: A flexible shaft could be used in some places where driver bits are hard to reach.
  • LED light illuminates dark working areas.
  • 3/8’’ AUTO CHUCK, 18+1 CLUTCH & VARIABLE SPEED: 18+1 Position Clutch: 18+1 torque (25 Nm) settings provide precise control for driving in/out....
Check Stock

Pinemeadow Yukon 3 Fairway Wood (Right-Handed)

  • Fitted Standard with our low-torque Pine meadow graphite shaft.
  • Unbelievable feel and forgiveness. Ultimately the most playable club we carry.
  • Suited best for: all golfers especially those who want to drop some of the longer harder to hit irons.
  • Fitted standard with our low-torque Pinemeadow Graphite Shaft for the same $54.95 value.
Check Stock

30 Series Go Kart Torque Converter Small Driver Pulley Clutch 3/4 inch Bore 3/16 inch Keyway Replaces Comet TAV2 30-75 Replaces Predator Comet 219552 Manco 5957 Yerf Dog Q43201W Max Torque,

  • (Includes Pilot Washer) Complete 30 series replacement 3/4" driver pulley, Replaces Comet TAV2 30-75, 219552, 5957.
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, Golf Karts, mini bikes, mini choppers, ATV,....
  • Replacement 30-75 Driver Pulleys will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more....
  • Comet 30 Series Replacement Torque Converter Driver bolts on to most engines with a horizontal shaft including..
  • TC30 Driver clutch bore: 3/4"(19mm), Uses 3/4 inch Asymmetrical Belt (Not Included). BE SURE YOU ARE ORDERING THE CORRECT PART, AND ALSO FOLLOW THE....
Check Stock