Top Low power Enclosure

Rockford Fosgate Punch P1-1X12 Single P1 12 Loaded Subwoofer Enclosure Ported

  • The P1-1X12 is a single P1 12” SVC subwoofer in a vented enclosure that reproduces low bass frequencies accurately with high output SPL (Sound....
  • The P1-1X12 vented loaded enclosure is Internally wired to create a 4-Ohm amplifier load with power handling of 250 Watts RMS / 500 Watts Max.
  • Punch Loaded enclosures are constructed with durable 5/8" MDF material and feature a proprietary high-flow, low-noise port with high current binding....
  • The P1-1X12 loaded enclosure measures at 15.125" x 19.125" x 15.75" (HxWxD).
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check Stock

Rockford Fosgate P3-2X12 Punch Dual P3 12 Loaded Enclosure Ported Subwoofer

  • The P3-2X12 is a dual P3 12” DVC subwoofer in a vented enclosure that reproduces low bass frequencies accurately with high output SPL (Sound....
  • The P3-2X12 vented loaded enclosure is Internally wired to create a 1-Ohm amplifier load with power handling of 1200 Watts RMS / 2400 Watts Max.
  • Punch Loaded enclosures are constructed with durable 5/8" MDF material and feature a proprietary high-flow, low-noise port with high current binding....
  • The P3-2X12 loaded enclosure measures at 15.125" x 33.875" x 15.75" (HxWxD).
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check Stock

Rockford Fosgate Punch P1-1X10 Single P1 10' Loaded Subwoofer Enclosure Ported

  • The P1-1X10 is a single P1 10” SVC subwoofer in a vented enclosure that reproduces low bass frequencies accurately with high output SPL (Sound Pressure Level).
  • The P1-1X10 vented loaded enclosure is Internally wired to create a 4-Ohm amplifier load with power handling of 250 Watts RMS / 500 Watts Max.
  • Punch Loaded enclosures are constructed with durable 5/8" MDF material and feature a proprietary high-flow, low-noise port with high current binding posts for maximum signal flow to the speaker inside.
  • The P1-1X10 loaded enclosure measures at 13.125" x 17" x 15.125" (HxWxD).
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check Stock

Rockford Fosgate P2-1X12 Punch Single P2 12' Loaded Enclosure Ported Subwoofer

  • The P2-1X12 is a single P2 12” DVC subwoofer in a vented enclosure that reproduces low bass frequencies accurately with high output SPL (Sound Pressure Level).
  • The P2-1X12 vented loaded enclosure is Internally wired to create a 1-Ohm amplifier load with power handling of 400 Watts RMS / 800 Watts Max.
  • Punch Loaded enclosures are constructed with durable 5/8" MDF material and feature a proprietary high-flow, low-noise port with high current binding posts for maximum signal flow to the speaker inside.
  • The P2-1X12 loaded enclosure measures at 15.125" x 19.125" x 15.75" (HxWxD).
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check Stock

Mackie Thump 15A 15 in. Powered Loudspeaker

  • 15 in. high-output woofer and 1.4 in. titanium dome compression driver Efficient Class D amplification System protection / limiting keeps your system safe 3-channel, digitally controllable mixer Powerful DSP for the best sound and performance Lightweight professional enclosure designed for heavy use.
  • Loudspeaker delivers deep low end with powerful DSP, wireless control and streaming in a professional enclosure.
  • The built-in 3-channel mixer features 3-band EQ per channel, application-specific speaker modes, user presets and more.
  • Application specific speaker modes let you dial in the system at the push of a button.
Check Stock

Rockville APM10W 10 400 Watt Powered/Active Studio Subwoofer Pro Reference Sub,White

  • Rockville APM10W 10" 400 Watt Active Studio Subwoofer in White. 200 Watt RMS. Built-in Class D Amplifier. Enclosure is made of top quality MDF wood. Our enclosure is not particleboard it is true high-grade MDF!.
  • The enclosure is 0.7" thick while the front board of it is a full 1.34" thickness to give you the ultimate best sound quality! Comes in 3 enclosure finish options Wood finish painted black. Wood finish painted white. Wood finish with vinyl front board.
  • Class "D" Amplifier Circuitry with Auto-Switching Power Supply. LED Power on/Stand-by Indicator on Rear Panel. Rubber woofer surrounds increases sound quality and eliminates unwanted distortions..
  • We developed the Most Optimized Magnet structure, Cone, and Cabinet Space that Reproduces the Sound to Play Back Exactly the Way it was Recorded! Specially Wound Voice Coils Produce Accurate Response along the Low Frequency Spectrum..
  • Thick "Wadding" protects inside the subwoofer cabinet - Wadding is a white, artificial silk-like material that we put inside the subwoofer cabinet for multiple reasons..
Check Stock

Rockville Apm10b 10' 400W Powered/Active Studio Subwoofer Pro Reference Sub

  • 10" 400 Watt Active Studio Subwoofer in Black. Built-in Class D Amplifier. Enclosure is made of top quality MDF wood. Comes in 3 enclosure finish options Wood finish painted black. Wood finish painted white. Wood finish with vinyl front board.
  • The enclosure is built with the perfect amount of air space to maximize sound quality for a studio. The front-firing port is built to the perfect spec to enhance the sound. Class “D” Amplifier Circuitry with Auto-Switching Power Supply. LED Power on/Stand-by Indicator on Rear Panel.
  • Rubber woofer surrounds increases sound quality and eliminates unwanted distortions. Computer Optimized Electronic Crossover Network filters out Highs and Mids. Front-Firing Port Shaped and Designed by Sound Engineers to Reduce Port Turbulence and Deliver Distortion Free Top Sound Quality!.
  • Specially Wound Voice Coils Produce Accurate Response along the Low Frequency Spectrum. Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound! Transducer Production Line to Make the SPL Performance Stable. Shiny metal mesh grill.
  • Crossover Frequency Control allows you to adjust low frequency input: 50Hz – 150Hz. ¼” TRS input jack. Left and Right XLR input/outputs. RCA input/outputs. Woofer Impedance: 8 Ohm. Frequency Respon....
Check Stock

MTX Audio TNP212D2 Terminator Power Pack Subwoofer System - Set of 2,BLACK

  • Complete Amplified Bass Package Bundles 2 X 12 Subwoofer Enclosure And Mono Block Amplifier.Power source type:Corded Electric.Speaker size:12 inches.
  • Variable Low- And High-Pass Filters Offer 40Hz–400Hz Range For Sound Shaping.
  • Tne212D2 Enclosure Features Dual 12-Inch Terminator Subwoofers With 1200 Watts Max Power.
Check Stock

Rockville RWS10CA Slim 1000 Watt 10' Amplified Powered Car Subwoofer Enclosure

  • Rockville RWS10CA Slim 1000 Watt 10" Amplified Powered Car Subwoofer Enclosure. 1000 Watts Peak power output..
  • 300 Watts RMS CEA rated. 10" Super Slim Subwoofer. Ultra Stiff Composite Pulp Cone with Kevlar Reinforcement..
  • 3D Molded Acrylic Dust Cap. Expanded & Rolled Steal Basket. High Density Laminated Foam Surround..
  • High Power Strontium Magnet with Ultra Saturated High BL Motor Structure. Vented Core Magnet Motor Structure..
  • 2" High Temperature Aluminum Voice Coil. 8mm Washer & Yoke Plates. 13.6mm Peak-to-Peak X-Max. 60oz. Magnet Motor Structure..
  • Super Slim Sealed MDF Enclosure Design. Aviation Grade Black Tweet Carpet with Embroidered Logo..
  • Black Texture Synthetic Leather Front Panel. Impedance: 4-ohms. Frequency response: 43Hz-500Hz. SPL @ 1w/1m: 93dB..
  • Dimensions: (LxWxH): 24" x 7" x 15". Built-in 300 Watts RMS CEA Rated / 1000 Watt Mono Block Amplifier..
  • 150mV – 5V Variable Input Level. 24dB Low Pass Crossover Frequency 50Hz-250Hz. Low Level RCA Inputs..
  • High Level Speaker Level Input with Auto Start Music Sense. RJ11 Jack for Dash Mounted Bass Remote..
Check Stock

Rockville Rws12ca Slim 1200 Watt 12\ Amplified Powered Car Subwoofer Enclosure

  • Rockville Rws12ca slim 1200 Watt 12" Amplified powered car Subwoofer Enclosure..
  • 1200 watts peak power output. 300 watts RMS. 12" Super slim subwoofer..
  • Ultra stiff composite pulp cone with Kevlar reinforcement. 3D molded acrylic dust cap. Expanded & Rolled Steal basket..
  • High density laminated foam Surround. High power strontium magnet with ultra Saturated high BL motor structure..
  • Vented core magnet motor structure. 2" High temperature aluminum voice coil. 8mm washer & yoke plates. 13.6mm Peak-to-Peak x-max. 70oz..
  • Magnet motor structure. Super slim sealed MDF enclosure design. Aviation grade black tweet Carpet with embroidered logo..
  • Black texture synthetic Leather front panel. Impedance: 4-ohms. Frequency Response: 38hz-500hz. Spl @ 1W/1M: 96Db..
  • Dimensions: 24" Length x 15" Height 4.37" Top depth x 6.65" Bottom depth. Built-in 300 watts RMS/ 1200 Watt mono block amplifier..
  • 150Mv - 5V variable input level. 24Db low Pass Crossover frequency 50hz-250hz. Low level RCA inputs..
  • High level speaker level input with auto start music sense. RJ11 jack for dash mounted bass remote..
Check Stock

Xscorpion (WHT12 1/2" Wafer Head Tek Pointed Screw, (Box of 200)

  • DUAL VENTED 12 INCH SPEAKER ENCLOSURE BOX: The Bbox 12-inch double vented Pro Audio Tuned subwoofer enclosure is designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers. Get the most out of your vehicle's subwoofer with car stuff designed for power and quality..
  • THE DESIGN: Our subwoofer box enclosures are built with a durable MDF that is 3/4" thick for solid frequency response and accurate music reproduction and we use a CNC Miter to ensure an airtight fit for your powered subwoofer. Our Dado design and construction offers a precision fit for our car subwoofer boxes & enclosures, which ensures a rattle and noise free environment..
  • SPECIAL FORMULA: We use Aliphatic wood glue on our 12" subwoofer enclosures to ensure an airtight seal between all MDF parts. Each 12 inch subwoofer box also gets a second application of glue around all internal joints after the final assembly..
  • HIGH QUALITY SOUND: We use quality materials like our special aliphatic resin wood glue and brad nails from a pneumatic nail gun to create a tight hold on the MDF parts during the glue drying process to ensure that our subwoofer boxes have an airtight no-leak, no-rattle air chamber improving the overall sound quality ....
Check Stock

Skar Audio Single 10 1,200 Watt Max Power Loaded Custom Fit Subwoofer Enclosure - Fits 2015-2020 Dodge Charger

  • Single 10" Custom Fit Loaded Subwoofer Enclosure - Fits 2015-2020 Dodge Charger.
  • Features a Skar Audio SDR-10 Dual 2-ohm Subwoofer (600W RMS/1200W Max Power).
  • Hand Molded Design and Precise Engineering Ensure Perfect Compatibility with Vehicle.
  • Sealed Enclosure and Powerful Subwoofer Delivery Incredible Low End Frequency Response.
  • Includes Mounting Hardware and Accessories - Fits in Right Wheel Well of Trunk.
Check Stock