Top M6x0 75 Tap

Drill America - POUM12X1.25 m12 x 1.25 Tap and 10.75mm Drill Bit Kit, POU Series

• Set contains high speed steel plug hand tap and matching high speed steel drill bit.
• High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping.
• Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
• M12 x 1.25 hss plug tap and matching 10.75Mm hss drill bit in plastic pouch.

New 0.305-32 .305x32 HSS Tap for Schrader Valve Stem Tap

Dual Beer Tower Dispenser – Draft Kegerator Tower Beer Dispenser Kit with 2 Faucet Tap Handles & Caps, Hose, Keg Wrench

• DOUBLE YOUR POURING POWER: Limiting yourself and your guests to pouring one beer on tap at your in-home bar is time consuming and frustrating.
• The G. Francis Double Tap Draft Beer Tower is a beer faucets accessory that will double your pouring power and give your bar the finished feel you have been longing for.
• USE YOUR EQUIPMENT: Inside lined with foam sheet for cooled tower systems insulation.
• Tower stands 13.25 inches (33.7cm) tall (not including 3.1-inch/7.9cm tall tap handles) and has a 3-inch (7.6cm) diameter and 4.5-inch (11.4cm) base diameter.
• 2.75-inch (7cm) center-to-center mounting hole distance (fits standard 3-inch/7.6cm hole pattern).
• Includes 2 separate 5-foot (1.5m) lengths of 3/16-inch (4mm) inside diameter (ID) (7/16-inch / 11mm OD) clear beer tubing with a 4.5-foot (1.4m) reach.
• BUILT TO LAST: Constructed from polished silver stainless steel hardware and components, hard plastic faucet knob tap handles, and soft rubber faucet cap sanitary covers for maximum strength and longevity that resists rust and corrosion while preventing scratches and other damage.
• Transparent hose is FDA approved 21CFR 175.300 PVC.
• KEEP OUT CONTAMINANTS: Black faucet cap sanitary covers are the most simple and effective way to keep the faucets clean and are....

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

• ...of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
• [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
• [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
• Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
• [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
• Includes bottom recesses for organizing the coils in included plastic bags.
• [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
• Load the thread insert into installation tool.
• Use the breaking pin tool to remove tang from insert.

Irwin Hanson 9740 1\ 10mm-1.5 Hexagon Metric Die

• Threading Dies and Tap Size: Metric Size M3×0.5, M4×0.7, M5×0.8, M6×1.0, M7×1.0, M8×1.0, M8×1.25, M9×1.25, M10×1.25, M10×1.5, M11×1.25, M11×1.5, M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
• SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
• Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
• Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..

Best Pro Lighting Transformers 300

• A toroid core saves energy and is 10% more efficient then an El-type core, and runs cooler and quieter (no hum), and runs smoother (no vibration).
• Tilted terminal board and large size lugs inside the taps hold up to eight 10-gauge wires or up to ten 12-gauge wires per tap and one photocell outlet.

Aceteel 1/2\-28 UNEF HSS Tap And Die Set, 1/2 x 28 UNEF Machine Thread Tap And Round Thread Die Right Hand

• Durable material: the tap and die set is made of alloy steel and metal, rugged and durable, can be applied for a long time.
• Equipped with storage box, tap die tool set is easy to store and organize and use..
• Practical repair tools: the thread tap set can help you to repair partially damaged nuts, bolts and threads.
• When your worn-out screws are rusty and can no longer match your machine, this set can help you easily eliminate the flaws on the threads.
• Fine craftsmanship: the polished thread tap kit is made with advanced technology and craftsmanship, which can fit nicely with screws.
• In addition, after being treated with a corrosion-resistant satin finish, the thread cutting friction is smaller and the surface becomes stainless steel, making it to be more bright and textured.
• Size information: the package comes with 9 x metric taps and 9 x metric dies in different specifications, namely, M3 (0.5 mm)/ M4 (0.7 mm)/ M5 (0.8 mm)/ M6 (1 mm)/ M7 (1 mm)/ M8 (1.25 mm)/ M9 (1.25 mm)/ M10 (1.5 mm)/ M12 (1.75 mm).
• Adjustable tap wrench handle measures about 19.5 cm/ 7-11/16 inch long, suitable for M3 to M12 (1/16 to 1/2 inch), and the die wrench handle is about 20 cm/ 7-7/8 inch long, suitable for M25 (1 inch).
• Suitable for beginners and skilled people: this tooth ....

iJDMTOY (1) 12V Wired Control Module w/ Solid, Strobe and Flash Features Compatible With Car, Boat, Household LED Strip or LED Bulb

• Solid light up function (LIGHT), (4) Strobe flashing patterns (MODE), Flashing speed control (SPEED/BRIGHT).
• Simply tap the LED (+/-) side to LED strip or any LED lights and then tap the 12V (+/-) side to 12V power.
• Module Box Size: 1.75" (L) x 0.50" (W) x 0.15" (H).

AZUNO 60-Piece Metric&SAE Tap and Die Set, GCr15 Bearing Steel with T-Handle/Wrench/Gauge/Screwdriver in Storage Case, Master Threading Toolkit

• 【60 Piece Tap and Die】: Set includes 54 taps & dies, 1 die handle, 1 T-tap wrench, 2 screw-pitch Gauge, 1 screwdriver, 1 tap wrench. Constructed by quality GCr15 bearing steel with pronounced performance in threading..
• 【Common Sizes in Metric & SAE】: 10MM Dies&Taps: M3x0.5,M4x0.7,M5x0.8,M6x1.0,M7x1.0,M8x1.25,M9x1.25,M10x1.5,M10x1.0,M12x1.75.
• 10UNC Dies&Taps: 4-40,6-32,8-32,10-24,12-24,1/4,5/16,3/8,7/16,1/2.
• 6UNF Dies&Taps: 10-32,1/4,5/16,3/8,7/16,1/12.
• 【Performance and Durability】: CNC machined Tap and Dies made by industry-grade GCr15 bearing steel with pronounced hardness and balanced ductility..
• 【Easy for Storage】: Comes with a heavy-duty storage case, convenient for storage and carrying. It has identified slot for each piece so that to keep neat and easy finding..
• 【Versatile Threading Tool Set】：This MASTER set is perfect for cutting and renewing external and internal threads to exact standards. Durable to process on hard metal such as alloy, steel and brass, for all-day performance in the shop or home project..

1\ NPT Pipe Carbon Hex Rethreading Die

• ...ABILITY - Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses.
• ▲ EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance.
• ▲ VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
• Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
• ▲ MOST POPULAR SIZES - Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
• (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
• (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
• ▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle.

Azuno 60PCS Metric&SAE Tap and Die Set, Titanium Coated GCr15 Bearing Steel with T-Handle/Wrench/Gauge/Screwdriver in Storage Case, Master Threading Toolkit

• 【60pcs Titanium Coated Tap and Die】: Set includes 54 taps & dies, 1 die handle, 1 T-tap wrench, 2 screw-pitch Gauge, 1 screwdriver, 1 tap wrench. Constructed by quality GCr15 bearing steel with titanium coating that ensures higher durability in threading..
• 【Common Sizes in Metric & SAE】: 10MM Dies&Taps: 3x0.5,4x0.7,5x0.8,6x1.0,7x1.0,8x1.25,9x1.25,10x1.5,10x1.0,12x1.75.
• 10UNC Dies&Taps: 4-40,6-32,8-32,10-24,12-24,1/4,5/16,3/8,7/16,1/2.
• 6UNF Dies&Taps: 10-32,1/4,5/16,3/8,7/16,1/12.
• 【Performance and Durability】: CNC machined Tap and Dies made by industry-grade GCr15 bearing steel with pronounced hardness and balanced ductility. Titanium coating on the finish ensures higher durability on hard metal..
• 【Easy for Storage】: Comes with a heavy-duty storage case, convinient for storage and carrying. It has identified slot for each piece so that to keep neat and easy finding..
• 【Versatile Threading Tool Set】：This MASTER set is perfect for cutting and renewing external and internal threads to exact standards. Durable to process on hard metal such as alloy, steel and brass, for all-day performance in the shop or home project..

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

• Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
• Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
• Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
• cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
• Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
• Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
• Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....