Top Machine Screw Tap Set

15 Pcs Thread Inserts M14x1.5 Female Thread Repairing Accessory Assortment Kit Drill Helicoil Repair Kit

  • Extremely stable performance: This thread helical coil repair tool kit is made of high speed steel and red color plastic handle, sturdy and durable in use and can be used in daily repair, car repair, drilling machine, etc.
  • Made of stainless steel of good rust and corrosion resistant..
  • Excellent practicability: The wire screw set is placed in the screw hole of the workpiece such as aluminum alloy to form a standard internal thread with high strength, wear resistance and high precision. Typical applications: high voltage switchgear, microwave communication, automotive parts, air separation equipment, radiators, etc..
  • Cost effective thoughtful kit: The use of wire screw sleeves for mm ---inch threaded hole conversion is convenient and fast. The imported equipment or mechanical inch thread is damaged, and it needs to be changed to mm thread due to the supply of spare parts.
  • All accessories are integrated in a box for convenient transportation and carriage..
  • Definitely recommend: Thread helical coil repair tool kit is ideal for restoring damaged threads, suitable for engine repair and otherautomotive applications for steel, cast Iron and aluminium. This kit helps create a stronger internal thread in soft metals and protects tapped threads against wear and da....
Check Stock

Happybuy 110Pcs Tap & Die Set Tungsten Steel Titanium Tap & Die Metric Tool Tap & Die Combination Set For Cutting External & Internal Threads

  • Premium Quality: High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Most Popular Sizes Included: This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M2 - M12 (1/16" - 1/2"& M6 - M20 (1/4" - 3/4")), 2 die holders (200mm (1" diameter bore)& 270 mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included.
Check Stock

Hi-Spec 39 Piece SAE & Metric Tap & Die Set. Complete M3 to M12 \\/ #4 to 1\\/2in Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case

  • CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece SAE & Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
  • 34 PIECE SAE & METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. SAE & Metric Tap and Dies: 16 thread sizes from M3 to M12 and #4 to 1/2in with 16 pitch sizes plus NPT (1/8-27).
  • GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
  • 3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
  • SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 1/4-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

6Pcs 1/4" Titanium Coated Drill Bits, HSS M3 M4 M5 M6 M8 M10 Metric Thread Tap Bits

  • TITANIUM COMBINATION DRILL TAPS: These HSS drill and tap bits are great tools used to create screw threads, to cut or form the female portion of the mating pair. Drill tap bits increase efficiency of operation by allowing for drilling and tapping to be accomplished in a single pass..
  • THREAD AND PITCH SIZE: M3, M4, M5, M6, M8, M10/0.7mm, 0.8mm, 1.0mm, 1.25mm, 1.5mm, with 1/4inch hex shank..
  • USER FRIENDLY: Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks..
  • APPLICATION: They are used on a machine to do the tapping, such as a lathe. Machine tapping with these taps is faster, and generally more accurate because human error is eliminated..
  • GUARANTEE: If there any issue about this product, please CONTACT us, we will give the best solution in the first time. we guarantee replacement or refund..
Check Stock

T-Handle T Type Tap Wrench Set of 3 Pieces Solid Collet Jaws

  • T-Handle Tap Wrench Solid Jaw 3 Piece Set.
  • Set of 3 Piece - Jaw Opening Ranges 1/16" to 5/32", 5/32" to 1/4" & 1/4" to 1/2".
  • The knurled cap on the jaws gives you the freedom to tighten the jaws to grip the tap, reamer, drill like a vice for a wide variety of applications.
  • Unused PartsDesigned for Use with Taps, Reamers, Screw Extractors, & Other Tools with Square Shanks Works the Same.
Check Stock

AZUNO 40-Piece Tap and Die Set in SAE Size, GCr15 Bearing Steel with Handle/Wrench/Gauge/Screwdriver in Storage Case, Essential Threading Toolkit

  • 【40 Piece Tap and Die】: Set includes 34 taps & dies, 1 die handle, 1 T-tap wrench, 2 screw-pitch Gauge, 1 screwdriver, 1 tap wrench. Constructed by quality GCr15 bearing steel with pronounced performance in threading..
  • 【Most Common Sizes in SEA】: 10 UNC Dies & Taps: 4-40, 6-32, 8-32, 10-24, 12-24, 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13.
  • 6 UNF Dies & Taps: 10-32, 1/4"-28, 5/16"-24,3/8"-24,7/16"-20,1/2"-20.
  • 【Performance and Durability】: CNC machined Tap and Dies made by industry-grade GCr15 bearing steel with pronounced hardness and balanced ductility..
  • 【Easy for Storage】: Comes with a heavy-duty storage case, convenient for storage and carrying. It has identified slot for each piece so that to keep neat and easy finding..
  • 【Versatile Threading Tool Set】： This professional set is perfect for cutting and renewing external and internal threads to exact standards. Durable to process on hard metal such as alloy, steel and brass, for all-day performance in the shop or home project..
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B Class High Speed Steel Screw Thread Threading Milling Taps Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 10-32 UNF Thread H2 Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

Hanson 52402 Extractor Ex-2 Spiral, for Tap Die Extraction

  • Screw extractor set is designed to remove broken studs, bolts, socket screws and fittings.
  • Screw extractors feature an aggressive left-hand spiral design for extra gripping power.
  • IRWIN screw extractor size and recommended drill bit size are etched on each tool.
  • Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases.
  • Recommended for use with TR-88 tap wrenches and 7/64-inch drills.
Check Stock

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
  • Use the breaking pin tool to remove tang from insert.
Check Stock