Top Marking Gauge

BCDshop Center Finder Woodworking Precision Marking Gauge Scribers Rockler Centre Offset Marking Tool Fits Standard Wooden Pencils Woodwork Measuring Tool Blue

  • Used to determine the exact position of the center of the board during board cutting, pin joints, assembly, etc..
  • The center scriber is made of ABS plastic and is environmentally friendly and durable..
  • The multi-function scribe can mark the center of the sheet with a thickness of 64mm..
  • You can move the scribe to draw a 1/16" 3/16" 5/16" 7/16" 1/8" 1/4" 3/8" 1/2" edge..
  • Marking Center Finder, Woodworking Precision Marking Gauge Scribers,Woodworking Center Scribe Marking Center Gauge, Woodworking Drilling Positioner....
Check Stock

Mortise Gauge Woodworking Marking Gauge Ebony Mortise Square Gauge 6.4 Inches Sliding Mark Scraper Marker Measuring Tool with Brass Screw Type Adjustable Head Meter Carpentry Carpenter Accessories

  • Multi purpose: this mortise gauge can draw straight lines on wood, with the large adjusting range, suitable for both amateur DIY and skilled carpenter to use, mainly applied for marking, scribing, laying out upon various joinery or other woodwork.
  • Quality and firm material: our mortise gauge is made of sturdy ebony and brass, which are solid and with good hardness, durable and rust resistant, can serve for long time using, lightweight for carry out to work.
  • About details: total length is approx. 164 mm/ 6.4 inches, with double-sided and three nails, can easily draw single and double lines, at the same time, the pointed tip and fixing screw will improve your work efficiency.
  • Adjustable width: the width between the two needles of our marker measuring tool can be adjusted from 0.21 to 3.9 inches/ 5.5 to 100 mm, which can satisfy your general wood marking tool usage needs.
  • Size detail: the mortise gauge measures approx. 6.4 x 2.2 x 3.1 inches/ 16.4 x 5.6 x 8 cm, with fine workmanship the woodworking marking gauge is well polished, smooth surface will not get you hurt when operating, help you get the job done in a short time.
Check Stock

MKC Wheel Marking Gauge Kit 2 Extra Blades Woodworking Tools Scriber for Woodwork

  • PROFESSIONAL DESIGN: This finely crafted marking gauge is turned from solid brass with a hardwood infill and stainless steel stick with etched....
  • SHARP BLADE for ALL WOOD: the blade is made from HSS steel with good heat treatment which can be used immediately after opening the package and....
  • EASY TO USE: both metric and imperial measurement values show on the stainless steel stick let you easy to read. micro-adjustable fences with big....
  • SATISFACTION SERVICE: Our wheel marking gauge is a well-packaged inbox and we will try our best to help you until you are 100% satisfied, if you have....
  • 8-inch precision ground steel rod, used as depth gauge and fast measurement transmission. The scale is 1 mm/1/25 inch for easy reference. It can be....
Check Stock

2 Pieces Sewing Gauge Metal Sliding Gauge Sewing Measuring Tool Quilting Gauge Ruler for Knitting Crafting Sewing Hemming Measuring Beginner Supplies

  • sewing gauge seam quilting measuring knitting sliding ruler sewing diy crafting tool.
  • Package content: there are 2 pieces sewing gauges in 2 different colors in our package, which can meet your various sewing and knitting requirements, or you can prepare them as backup, share with your friends or family members.
  • Reliable to use: this metal sliding gauge is made of stainless steel material, durable and not easy to break or deform, you can use for a long time, the smooth surface and edge will also not scratch your fabric and other materials.
  • Nice functional tool: the sewing measuring tool can keep your work accurately, and the sliding measure sets distance for marking hems, tucks, plates and button holes.
  • This sewing gauge with a sliding marker that will stay in place for repeated marking.
  • Suitable occasions: our quilting gauge ruler is suitable for kinds of sewing crafts, you can use the gauge for sewing, patchwork, quilting, knitting, crochet, embroidery, measuring and checking, help you to get correct information, and bring much convenience for you.
Check Stock

HONEYSEW 5-in-1 Sliding Gauge Measuring Sewing Tool with Free Seam Gauge Ruler

  • 5-in-1 Sliding Gauge Measuring Sewing Tool with Free Seam Gauge Ruler.
  • Adjustable from 0 to 5-inch in 1/8-inch increments.
  • Use this handy tool for marking button holes.
Check Stock

Clover 9506 5 in 1 Sliding Gauge with Nancy Zieman

  • Use this handy tool for marking button holes.
  • Adjustable from 0 to 5-inch in 1/8-inch increments.
Check Stock

Fabric Markers Pens, 6 Color Water Soluble Erasable Marking Pens, 1 Pcs Gauge Sewing Measuring Tool, 1 Soft Tape Measure, for Tailor's Disappearing Ink Pen, Sewing Fabric Markers and Tracing Tools

  • 【Products Include】In this kit, You will get 6 colors disappearing ink fabric marker pen, 1 pcs gauge sewing measuring tool and 1 soft tape measure, for sewing marking and tracing tools, variety of colors can meet your needs..
  • 【Fabric Marker】Automatically disappear or quickly erasable by water..
  • 【Measuring Ruler】Sewing gauge with a sliding marker that will stay in place for repeated marking, the surface and edges are smoothed so that you can get accurate measurements without replacement..
  • 【Disappearing Erasable Ink Fabric Marker Pen】Especially used for fabric and clothing marking, shoe labeling, cross stitch, needlework, handicrafts, patchwork, embroidery, artificial flowers and DIY, etc. It disappears automatically or quickly erasable by water..
  • 【Wide Applications】Very suitable for fabric DIY, cloth, textiles. Multi-color marking is very suitable for decorating clothes, shirts, pants, linen, canvas shoes, T-shirts, jeans, bags, shoes, pillowcases, backpacks, baseball caps, clothing, handbags, etc..
Check Stock

Clarke Brothers Wheel Marking Gauge - Woodworking Marking Scriber Kit With 2 Replacement Cutters - Wood Marking Tools With Graduated Inch & MM Scale - Solid Metal Bar Wood Scribe Tool For Carpenter

  • ✅ PATENT PENDING - ROLL STOP FENCE WITH FLAT SPOT - woodworking tasks with a high-end wheel marking gauge, which will help you lay out lines parallel to a flat wood surface with max precision and indicate exactly where wood needs to be cut..
  • ✅ MAKE LINE MARKS WITH PRECISION: The super clear, laser engraved graduation marks on the bar are available in both metric and imperial versions up to 6''/150mm, for convenience in your woodworking projects..
  • ✅ INVEST IN A MONEY SAVER MARKING WHEEL KIT: The 2 extra hardened Steel wheel cutters included add great value to your order. Eliminate the chances of wavering lines and complete your tasks faster and easier..
  • ✅ USE YOUR WOODWORKING SCRIBE FOR YEARS: The 8" long graduated bar is made of solid brass, Steel and aluminum alloy, corrosion-resistant. The non-marring brass face protects it from damage when not in use..
  • ✅ ENJOY ONE-HANDED OPERATION: Fast and easy to use, this convenient marking gauge wheel will take all the fuss out of your woodworking cutting. Feeling perfectly balanced, our wood marking tool won’t strain your hand..
Check Stock

YEQIN 5-in-1 Sliding Gauge Measuring Sewing Tool

  • Use this handy tool for marking button holes.
  • Adjustable from 0 to 5-inch in 1/8-inch increments.
  • our quilting ruler tools are suitable for DIY craft, sewing, patchwork and more, easy to add seam allowances to patterns or mark lines on fabric, can also be applied to mark code spacing and button holes.
Check Stock

TICOFTECH 12-Inch Combination Square Inch/Metric Metal Combo Square with Stainless Steel Blade Accurate Woodworking Measure Square with Carpenter Pencils……

  • [Optimized function]: Scale laser calibration, clear, accurate and wear resistant. Durable cast zinc body, rust proof stainless steel blade.
  • [Accurate Measurement]: The exclusive carpenter square allows you to quickly and accurately ensure square and level marking and measuring in a vast array of applications.
  • [Multi-tool]: TICOFTECH set can be used as a square, depth gauge, scriber, and a level[Multi-tool]: TICOFTECH set can be used as a square, depth gauge, scriber, and a level.
  • [Applications]: Great for marking 45 and 90 degree angles, and can also function as a handy gauge for transferring precision angles and other measurements.
  • essential for use in your rafter, deck, stair and roofing projects, and in other general carpentry operations.
  • [GUARANTEE]: In the rare occasion you are not completely satisfied with your purchase, TICOFTECH will refund or replace your order through our 100% Money Back Guarantee.
Check Stock

Woodraphic Signature Professional Dual Function Scriber Gauge for Measuring and Marking - All in One Aluminum Steel Framing Tool for Professional Carpentry Use - 14 inch Imperial

  • ✔️ PRECISION PRECISION - WOODRAPHIC’s Ruler gives you the ultimate marking precision, allowing the user to accurately mark up to the finest millimeter. The vernier scale and main scale were designed to slide smoothly into the main body and it will fit on to objects perfectly. WOODRAPHIC has more accurate minimum measuring range than regular vernier calipers which can mark up to 1/20 (0.05) mm which is about 0.019 inches..
  • ✔️ MULTI-FUNCTION (MEASUREMENT AND MARKING) - With one woodraphic caliper you can do 5 different things! From measuring 45 degrees, 90 degrees, depth, width to drawing lines. You can gauge the thickness and depth of the object just like any other vernier calipers but also you can check the angles with combined miter and t-square. You can mark the object by utilizing the main scale as a ruler. Experience easier measure and marking with woodraphic’s all in one caliper!.
  • ✔️ SOMETHING ABOUT VERSATILITY - Woodraphic’s measuring tool is absolutely versatile. You can insert a straight ruler and this will work as a vernier caliper. Woodraphic’s caliper comes with additional depth gauge accessory which is perfect for measuring items such....
Check Stock

Taytools 465494 Wheel Marking Gauge Depth Gauge with Solid Brass Machined Head Hardened .310 inch Diameter Beam Hardened High Speed Steel Cutting Wheel Overall Length 8 Inches Easy Read SAE and Metric

  • This is a well-made and economical marking/cutting gauge. A wheel larking gauge is an indispensable tool used in the shop to lay out precision woodworking joinery. This tool has excellent mass and weighs in at 6 ounces. This wheel marking gauge will provide years of accurate and reliable performance in the shop..
  • The sharp hardened high speed cutting wheel will leave a sharp and distinct line in soft and hardwood both with and across the grain..
  • The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The ergonomic brass head fits perfectly in the hand providing precise control. The knurled thumb screw is also solid brass and securely locks the head to the beam holding measurements. The head has a countersink so the cutter can be fully retracted protecting it when not in use..
  • The wheel cutter is 7/16 inch in diameter. The cuter can be easily resharpened by rubbing the flat surface in any sharpening media. Replacement cutter are also available..
  • The hardened steel beam is .310 inches in diameter and 8 inches long. Maximum cutting depth of the gauge is a full 7 inches. The beam is black chrome plated to protect against corrosion and to allow easier reading of the mm and SAE graduations. Graduations allow easy....
Check Stock