Top Masonry Reinforcement

Romabio Masonry Flat, Mineral-Based Masonry Paint for Brick, Stone, Hardie Board, and Stucco, Richmond White, 15L

  • Romabio Masonry Flat is a beautiful, permanent flat finish that is naturally toxin-free, and environmentally friendly. High-performing mineral paint made for extreme durability for Interior or Exterior masonry..
  • Ideal for brick, stone, stucco, and cementitious siding. Breathable coating that calcifies to the masonry surface allowing moisture to release..
  • 2 coats, no additional primer for unpainted, absorbent masonry. Backed by a 20-year warranty when applied as directed..
  • Masonry Flat will not chip, peel or flake off, and touch ups can be done at any time..
  • Easy to apply with brush, roller, or sprayer with easy clean up with soap and water..
Check Stock

Chimney Brick Sealer Clear Water-Based Siloxane Sealer - Breathable Waterproofer for All Exterior Vertical Masonry Surfaces 1 gal

  • CLEAR PROTECTION – Provides a long-lasting, non-glossy invisible coat to masonry surfaces. Will never leave any residue or alter the color or....
  • WATER SEALANT – Water-based, siloxane penetrating brick sealer that bonds with the minerals in masonry to provide with you long-lasting water....
  • POWERFUL CHIMNEY SEALER – Keep your chimney leak free and protect it or other masonry surfaces from spalling, flaking, or cracking. Best suited to....
  • EASY TO APPLY – First step is to ensure your chimney or masonry surface is fully cleaned and clear of dirt, dust, grease, oil, efflorescence, etc.....
  • 5 YEAR WARRANTY – MasonryDefender offers a 5 Year Limited Warranty on Vertical Masonry Surfaces.
Check Stock

12-Inch SDS Max Chisel Set, SUNGATOR Heavy Duty Rotary Hammer Chisel Bit Set, 3-Piece Including Flat Chisel, Point Chisel and Scaling Chisel with Storage Box

  • 【PREMIUM MATERIAL】Top heat treated steel with high hardness provides outstanding performance on chipping and breaking bricks, concrete and other masonry..
  • 【EXTRA LONG & LARGE SIZE】12-inch long chisels with SDS Max plug give strong impact on concrete, flooring and brickwork..
  • 【SHARPENED TOPS】Specially sharpened top gives continuously effective breaking on various masonry objects..
  • 【MULTI-PURPOSE APPLICATION】Three chisels make you never worry about various daily chipping & demolishing work. Point chisel for demolishing concrete slabs, brick, mortar, slate, masonry, and all different types of stones.
  • Flat Chisel edges, chips, scales or channels concrete, stone, masonry and brick.
  • Scaling Chisel removes scale, rust, concrete, masonry, brick, and stones or removes LARGE quantities of other tough material..
  • 【UNIVERSAL SDS MAX SHANK】Strengthened SDS Max shank suitable for different rotary hammer with SDS Max chucks..
Check Stock

Professional Wet Drill Core Bits for Reinforced/Hard Concrete,Hard Aggregate, Brick, and Block (.440” Segment) 1-1/4"-7 Threaded Arbor (11", 18 inch)

  • ...for unrivaled drilling performance. The lowest vibration of drill bit ensures that the structures are not harmed during drilling operation..
  • MULTIPURPOSE USE: The CD200 Core Drill Bit is specially designed for drilling higher PSI concrete, concrete with high level of rebar reinforcement, granite, brick, marble, and other masonry materials under situations such as installing plumbing infrastructures and air conditioners, water-electric installations, pipelines, stair railings, roads, and irrigation systems, among others..
  • COST EFFECTIVE: Mesa Diamond Core Bit CD200 gives the best performance functionality to operations at the lowest cost and fastest speed due to the diamond's unique structure, which allows it to drill speedy and precise holes on the roughest flooring..
  • %100 MANUFACTURER GUARANTEE: Mesa Diamond Premium Core Drill Bit CD200, which have been utilized in the industry for 35 years, tested and authorized all over the world. As a manufacturer, we provide reliable diamond products guarantee..
Check Stock

Makita 3 Piece - SDS-Max Chisel & Point Bit Set for SDS Max Rotary Hammers - Heavy Demolition for Reinforced Concrete & Tile

  • ✅ Makita's 3-Piece SDS-MAX Shank DEMOLITION BIT Set with Steel Case For SDS-MAX Chuck ONLY Rotary Hammer Drills with dedicated 3 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Point Bit, Flat Chisel & Scaling Chisel for EASY Demolition into all your Reinforced Masonry, Concrete, Brick, Tile & Cinder Block application.
  • ✅ 4 Piece SDS-Max Shank Demolition Set includes: 1 Heavy-Duty Carrying Case + 1 Point Bit of 15" + 1 Flat Chisel Bit of 15” x 1" Wide + 1 Scaling Chisel Bit of 15" x 2” Wide | Engineered in Japan for optimal use with Makita SDS-Max Rotary Hammer while also fully compatible with All SDS-MAX Rotary Hammers.
  • ✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping, scaling and large area surface removal.
  • ✅ AVOID LOWER PRICED & lower quality Chisel and Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolishing and making the overall chiseling much more difficult | ....
Check Stock

DQB Industries 11956 Masonry Brush, White

  • A terrific all-purpose tool for applying a variety of liquid compounds on Rough or smooth masonry.
  • All-purpose tool for applying a variety of liquid compounds on Rough or smooth masonry surfaces.
  • Handle has a hang-up hole for easy storage in shop or garage.
  • This 6-1/2 inch Masonry Brush features five rows of White Tampico bristles.
Check Stock

Thoro T1180 Gry Seal Foundation Coating, 50 lb

  • Waterproofs exterior below grade concrete or masonry.
  • Apply with a push broom or a 6” masonry Brush.
  • Cleans up with soap and water immediately after use. Recommended for: Concrete, masonry, basement walls, foundation and retaining walls. Coverage: Base Coat: 225 square feet at 1/16 IN dry-film thickness.
  • Top Coat: 450 square feet at 1/32 IN dry-film thickness. Coverage will vary depending on surface texture and porosity.
Check Stock

DRYLOK 00917 Cement Hydraulic WTRPRF, 4-Pound, Gray

  • Use to patch interior or exterior mortar joints, cracks and holes in masonry walls above or below grade, sealing leaks around concrete and masonry.
  • Withstands up to 3,050 lb. of hydrostatic pressure.
  • Sets within 3 - 5 minutes to stop active water leaks.
  • Interior and Exterior use, no topcoat required.
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

Romabio Masonry Flat, Italian Mineral Paint, Brick, Stone & Cementitious Siding, Going Greige, 1L

  • Romabio Masonry Flat is a beautiful, permanent flat finish that is naturally mold resistant, toxin-free, and environmentally friendly. High-performing mineral paint made for extreme durability for interior or exterior masonry..
  • Ideal for brick, stone, stucco, and cementitious siding. Breathable coating that calcifies to the masonry surface allowing moisture to release..
  • 2 coats, no additional primer for unpainted, absorbent masonry. Backed by a 20 year warranty when applied properly and will not chip, peel or flake off..
  • Easy to apply with brush, roller or sprayer. Touch ups can be done at anytime. Easy clean up with soap and water. Hand crafted in Italy using 2,000 year old techniques and modern technology for a revolutionary product..
  • Cradle to Cradle Certified, HPD, and A+ French VOC emissions, Romabio backs its marketing claims with 3rd party testing. Romabio products are “bio-logical,” manufactured with intelligence and care, and inspired our name: “Roma” for Rome, Italy, and “Bio” for organic and natural..
Check Stock

COMOWARE 4 1/2\ Cut Off Wheel 25 Pack, Cut Off Wheels 4 1/2 x 7/8 Inch Ultra Thin, Metal and Stainless Steel Cutting Wheel for Angle Grinder, General Purpose Metal Cutting Disc for Angle Grinder

  • 【SHARP & CLEAN CUTTING】 This 25-pack 4-1/2 x 7/8-inch cut off wheel set is specially formulated for fast cutting in metals and stainless steel. The extremely thin .045-inch wheel design helps for clean, straight cuts with minimal burr..
  • 【PREMIUIM MATERIAL】 These 4-1/2" cut off wheels are specifically manufactured from corundum, aluminum oxide grain that provides high hardness, durability and abrasion resistance. The internal double fiberglass reinforcement provides ultimate safety and longer service life in these ultra-thin cutting wheels..
  • 【GENERAL PURPOSE METAL CUTTING】 Proprietary aluminum oxide grain combination helps these angle grinder cutting wheels deliver aggressive cutting action on carbon steel, sheet metal, rebar steel, stainless steel and other ferrous metals (not for masonry or concrete)..
  • 【SAFETY & STABILITY】 Reinforced by 2 full sheets of fiberglass and zinc-iron alloy rings for extra durability, this very hard cutting disc delivers stable performance with less wheel shatter..
  • 【GREAT PERFORMANCE】 These 4.5" cut off wheels for metal are compatible with all 4-1/2 inch angle grinders with 7/8 inch arbor. Up to 13,300 RPM (003ecommon 13,000 RPM) rotating speed for maximum productivity..
Check Stock

Romabio Masonry Flat, Italian Mineral Paint, Brick, Stone & Cementitious Siding, Navy Steel, 15L

  • Romabio Masonry Flat is a beautiful, permanent flat finish that is naturally mold resistant, toxin-free, and environmentally friendly. High-performing mineral paint made for extreme durability for interior or exterior masonry..
  • Ideal for brick, stone, stucco, and cementitious siding. Breathable coating that calcifies to the masonry surface allowing moisture to release..
  • 2 coats, no additional primer for unpainted, absorbent masonry. Backed by a 20 year warranty when applied properly and will not chip, peel or flake off..
  • Easy to apply with brush, roller or sprayer. Touch ups can be done at anytime. Easy clean up with soap and water. Hand crafted in Italy using 2,000 year old techniques and modern technology for a revolutionary product..
  • Cradle to Cradle Certified, HPD, and A+ French VOC emissions, Romabio backs its marketing claims with 3rd party testing. Romabio products are “bio-logical,” manufactured with intelligence and care, and inspired our name: “Roma” for Rome, Italy, and “Bio” for organic and natural..
Check Stock