Top Mastercraft Solder

Stahl Tools SSVT Variable Temperature Soldering Station

  • [HIGH PRECISION & LARGE POWER]: The solder station has large power and high precision. Power: 60 watts, temperature adjustment range: 194°F 896°F / 90°C 480°C, temperature stability: ±2°F / ±1°C. It’s fast heating up and takes only 6 seconds to reach the melting point of 392°F solder wire. It’s perfect welding equipment..
  • [FEATURES]: Anti-static design & ESD safe, LED display, PID temperature control technology, fast heating, sleep mode & wake function, °C/°F conversion function, indicator for tracking temperature and temperature compensation, digital temperature correction, reusable ceramic core. Ergonomic solder iron handle..
  • [LONG WORKING LIFE]: Protective cord shield, silicone heat shield, and reusable soldering iron extend the service life. Internal 60 watts thermal ceramic soldering iron heater, welded firmly, long service life, easy to replace and purchase. Stainless steel soldering iron prevents accelerate aging of materials for high temperature work, improve heat dissipation and prolong heater life..
  • [SOLDERING KIT INCLUDED]:60-watt digital soldering station with side-mounted solder roller holder (removable), built-in soldering iron holder to ensure soldering iron safety, cleaning Sponge to remove solder residue for future use, 2....
Check Stock

Ultra-Thin Solder Wire 0.01in (0.3mm) Rosin Core Flux 2.5, Lead Free Solder Wire Sn99 Ag0.3 Cu0.7 Flow 50g Electronics Soldering Electric Solder

  • ULTRA-THIN- the solder wire diameter is just 0.01inch, designed to solder the tiny component, just enough to add enough solder on those small MSD pads.
  • LOW MELTING POINT- solder fast melting at 419F ( 217 Deg.C), suitable all soldering tools.
  • IMPROVED SOLDER- this 0.3mm solder wire content high quality allow Sn99 Ag0.3 Cu0.7, provides excellent conductivity, eliminate soldering issue, reduce labor cost.
  • APPLICATION- good for fine solder work, soldering for electronics equipment.
  • LEAD FREE- Unlead solder, excellent performance for electric soldering project.
Check Stock

VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bobbin Desoldering Wick Solder Remover Wick Desolder Electronic Components - Pack of 1

  • Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!.
  • Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily.
  • The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free.
  • Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up.
  • The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze!.
Check Stock

TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering

  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively..
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas..
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time..
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards..
Check Stock

MG Chemicals 4895-227G 60/40 Rosin Core Leaded Solder, 0.032\ Diameter, 1/2 lbs Spool

  • Tin Lead Rosin Core Solder：rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices，gauge wires, toys, stained glass, jewelry and more.
  • Solder Wire Composition：60% Tin and 40% lead. Melting point 190°C / 374°F, quick and easy，Rosin core with 2% flux, no extra flux is needed.
  • Good quality soldering wire: flows well and heats evenly, easy to use. Good solder ability both in electrical conductivity and thermal conductivity.
  • With the solder wire reel, soldering can be accomplished quickly..
  • Pack Content: 50g( 0.11lbs) 0.6mm X1 and 50g( 0.11lbs) 1.5mm X1, perfect as a starter kit for beginners.
  • Rosin Core Solder Wire:We have a professional team and provide high 60/40 rosin core solder wire..
Check Stock

Harris SCLF16 Stay Clean Soldering Flux, 16 oz.

  • Nice Combination: the package comes with 1 solder wire, 1 no clean solder wicks, 1Soldering Flux & 6 welding auxiliary tools, enough quantity and practical toolset for welding and desoldering requirements.
  • 6 Welding Auxiliary Tools: To meet the welding operation requirements of press, cutting, scraping, hooks brushes, fork. Also, it can be applied to integrated circuit assembly and disassembly, precision electronic components.
  • Safe Rosin Paste Flux: Refined with weak acid flux, semi-solid, and not easy to pour. The most suitable flux for hobby and electronic assembly. Good for cables and large terminals. Removes oil or oxides, and improves wettability.
  • Solder Wick & Solder Wire: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive. Solder wire has a low melting point, flows smoothly, has fast soldering speed, and has strong solder joints.
  • Multifunctional Welding Kit: Ideal for repairs, auxiliary welding, and assembly work. For precision welding repair work such as fixing, removing, cleaning, etc., making the work easier.
Check Stock

Electronic Solder Wire Lead Free Rosin Core Flux 2.5% Diameter 0.06in 1.5mm Gauge 1.76oz 50g Sn99 Ag0.3 Cu0.7 Flows Electric Soldering Unleaded PB Free

  • WIDE SOLDER- the diameter of solder wire is 0.06inch/1.5mm, soldering fast, ideal for drag soldering on MCU, IC, DIP components, make soldering quick, suitable most solder job.
  • ROSIN CORE- great solder with rosin core, easy for soldering, the flux 2.5% is better than others with 2.0% on the flowability.
  • LOW MELTING POINT- the melting temperature is about 419 Deg.F, suitable for all soldering tools.
  • WIDELY APPLICATION- the 0.06in diameter solder wire is common to solder most electronics components or wire, ideal for electrical soldering, repairing, diy.
  • ALLOY SOLDER- contained Sn99, Ag0.3 and Cu0.7, make strong solder joint, 0.3% silver is important for electrical conductivity, excellent for soldering.
Check Stock

Youland Soldering Iron Tip Cleaner + 60/40 Solder Wire Reel Fine 0.6mm Tin Lead Rosin Core (1.76oz/50g) + Soldering Rosin Flux Paste Gel (0.35oz/10g) for Electronics Metalworking Welding

  • √ Ideal Choice for Soldering Accessories Kit —— Contains 3 of the most essential products for welding, saving you time of multiple purchases. NOTE: solder wire & flux were packed in the container.
  • √ Feature of Solder Iron Tip / Head Cleaner —— Sturdy metal container.
  • The Sponge made from brass coils, softer than the tip plating, yet harder than the oxidation that forms on the tip. Won't damage your soldering tips. To clean the tip, just stab the iron into the holder, great alternative to a wet sponge. No water required, meaning less chance of oxidation and won't reduce tips temperature, Avoid soldering iron cooling, improve welding efficiency.
  • √ Feature of Solder Rosin Wire Core Tin —— Produced with international standard flux formula, Low melting point: 374℉ / 190℃.
  • Good activity, Stable performance, Stable performance, fast tinning.
  • fresh smell, less smoke, no toxic gases, less splashing when welding.
  • Solder joints are bright and firm, forming a protective film on the surface of the solder joint after soldering, relieving solder joints Oxidation reaction.
  • low melting point high insulation resistance, reduced welding time.
  • √ Feature of Solder Rosin Flux Paste —— No-clean solder paste with minimal residue and no cleaning requ....
Check Stock

uxcell 10 M 8 x 10 mm Plastic Flexible Corrugated Conduit Tube for Garden,Office Black

  • 【Product Specifications】Lightweight, heat shrinkable and insulation solder connector has 150PCs quantity..
  • 【Waterproof】Solder connectors can prevent cable corrosion and it is waterproof , which can be also beneficail to solder and seal..
  • 【Professional design】Due to polyolefin pipes inside and hot-melt glue outside, this solder connector keeps double-wall design pipes..
  • 【Perfect in workmanship】Via accurancy craft by many experts, such a solder connector is entitled with high practical adoptability..
  • 【Widely used】With wide application on marine or automobile, this solder connector keeps waterproof glue that adopts thermal activation..
Check Stock

50PCS Solder connector-Solder Seal wire Connector-Solder Seal Heat Shrink Butt Connectors Terminals-Electrical electrical crimp kit -Waterproof Insulated Marine Automotive Copper.

  • Easy to Use，No welding-Solder Heat Shrink Butt Connectors-Strip Wires, Insert into electrical wire terminal, and Heat. Save time and frustration white improving efficiency. solder seal Wire connectors safe for speaker wire, automotive, motorcycle, marine wire connectors，DIY electrical wirings and other outdoor applications.
  • Waterproof Solder Wire connector:Electrical solder butt connectors Polyolefin heat shrink tubing in outside and hot melt rings in inside effectively improve waterproof performance of solder shrink butt connectors,Hot Melt Adhesive & Solder inside ensures wires tightly connected and avoids wires slipping out of the terminal connectors..
  • Versatile Wire Solder Connector Kit：Wide variety of sizes sorted waterproof butt connectors kits to fit multiple needs， butt splice wire connector set includes red (AWG: 22-18), blue connectors(AWG: 16-14), white (AWG: 26-24), and yellow (AWG: 12-10) insulated electrical wire splicers connectors.
  • Professional Grade Safetys Standards：Solder seal wire connectors compliant with ROHS,ISO 9001, SGS and CE standards，Shrinking Ratio: 2:1,,Color-coded heat shrink tubing makes it easy to identify the right size of the wire connector for every application.
  • We will give you 4 trials solder heat shrink ....
Check Stock

EASTMAN Sterling Lead Free Solder, Silver, 85325 EASX1, 1 Count (Pack of 1)

  • PLUMBING SOLDER: Pipe soldering is ideal for sealing, joining, coating, and filling metals.
  • COMPATIBILITY: Solder wire is perfect for use on brass, bronze, copper, galvanized iron, monel, steel, stainless steel and all other solderable alloys that require maximum reliability of solder joints.
  • VERSATILITY: Designed for safe use in potable water applications for plumbing, heating, and industrial applications.
  • DURABLE: The Flo Safe lead free solder metal is alloyed from pure virgin metals.
  • meets all state and federal specifications for Safe Drinking Water Act, and meets ASTM B-32 alloy TC specification.
  • MELTING POINT: Pipe solder features a maximim temperature before melting of 410 degrees.
Check Stock

LA-CO 22101 Regular Soldering Flux Paste, 2 oz

  • Flux facilitates the flow of solder, providing for more controlled and accurate soldering • Solder will flow wherever flux is applied.
  • Increases efficiency and expedites the soldering process, taking less time to get the solder to flow where you need it.
  • Allows the solder to form strong, long lasting mechanical and electrical bonds.
  • Prevents corrosion by forming a protective coating over the solder joint.
Check Stock