Top Metal Plasma Cutting Machine

Plasma Cutter, 50Amp Dual Voltage 110V/220V Plasma Cutting Machine, Inverter Metal Plasma Cutting Equipment, Maximum Cutting Thickness 5/9\(14mm)

  • 【Plasma Cutter】The CUT-50 cuts rusted, rough or painted surfaces effectively and produces very little dross during the cutting process. CUT-50 plasma cutting machine has better cutting quality and longer wearing parts life..
  • 【Excellent Performance】20-50 A output, 2/5" (10mm) ideal clean cuts and 4/7" (14mm) maximum cut thickness under 220V.
  • 10-35 A output, 1/3" (8mm) ideal clean cuts and a maximum cut thickness of 2/5" (10mm) under 110V. This plasma cutter suitable for cutting alloy steel, stainless steel, copper, aluminum and other metals..
  • 【Dual Voltage Input】This plasma cutting machine supports 110V / 220V switching input power supply. 110V, 50/60Hz @ 35 A input.
  • 220V, 50/60Hz @ 28 A input. The product comes with a power conversion plug, which can be plug and play in different environments..
  • 【Safe & Portable】The plasma cutter is small in size, light in weight, and comes with a handle for easy portability. Plasma cutter with built-in over-heat protection, over-voltage protection, strong heat dissipation, good insulation.Adopt air pressure adjustment device，use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and other metals..
  • 【Package Includes】PT-31 Plasma Torch, Hose, Ground Clip, Power Adapt....
Check Stock

FLARING Plasma Cutter Equipment 50 AMP 220V IGBT 1/2'' Clean Cut CUT50 Max 3/5‘’ Cut High Frequency Inverter Plasma Cutting Machine for Car Frame,Carbon Steel,Stainless Steel,Thin Copper,Aluminum

  • [Cutting Ability] This plasma cutter machine automatic 220v(50/60hz),10-50A dc output, 1/2″(12mm) ideal clean cut and 3/5″(15mm) maximum severance cut under 220v,70% duty cycle. The upgraded model only supports 220v voltage input..
  • [Cutting Material] Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper,cast iron,chrome and aluminum(Aluminum≤1/4″,Copper≤1/5″).
  • [Breaker Recommendation] We suggest a 30A breaker on 220V while using this plasma cutter.Air Pressure 60-70PSI suggested.Btw,this CUT50 plasma cutting machine works well with a generator above 5000W..
  • [Fan-Runs-on-Demand cooling system]The new machine uses powerful cooling system, “dormant” fan,only operates when needed. This cuts down on fan noise, along with reducing power consumption and contaminants drawn into the machine..
  • [Warranty Assurance] We are a manufactory with over 10 years’ experience of professionals producing the plasma cutter machines,3 year’s warranty.Please add to cart and take it without hesitation.
Check Stock

SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean Cut (CUT 50)

  • 【Superior performance】This plasma cutter features PRO technology, more stable performance. High duty cycle result in less power consumption. More economical and effcient than the traditional cutting machine due to the high speed, high temperature and high energy plasma draught..
  • 【Exquisite workmanship】 Made of heavy duty iron. Its solid material construction makes it reliable and gives it strength that can be used for a long time. It not only can be used in businesses and DIY users, but also fully accommodating the demands of professional operators..
  • 【Digital Display】DC output Digital LCD Display, Easy Read Front Panel Air-Pressure Guage, save energy and no noise, High cutting speed, Cutting smoothly and no polish demands..
  • 【Considerable & Safe design】Built-in over-heat protection, over-voltage protection, under voltage protection and over heat protection. Comes with wire and mask, which can prevent you from hurting while using..
  • 【Wide range of applications】Suitable for a wide range of applications including sheet metal fabrication, light industrial use, site work, automotive, ducting work, repair and maintenance services. The cutting machine not only use in businesses and DIY users but also fully accommodating the demands of profes....
Check Stock

PrimeWeld Pilot Arc 50A Plasma Cutter 200A TIG/Stick Welder Combo Multipurpose Welding Machine for Home or Jobsite Use with 1/2-inch Clean Cut Plasma Cutter TIG Welder and Stick Welder CT520DP

  • 3-IN-1 PLASMA CUTTER/WELDER COMBO: Combines plasma cutting, TIG/stick welding and Pilot Arc welding functions in one convenient and versatile unit.....
  • TIG WELDER PLASMA CUTTER COMBO: Multipurpose welding machine can cut all types of metals up to 1/2-foot thick with the 50-Amp plasma cutting function.....
  • PORTABLE ARC PLASMA CUTTER: At only 32 lbs., it's ideal for home or jobsite use. Has a 60% duty cycle at max amps for all functions, AC 110/220±15%.
  • VERSATILE WELDING, CUTTING MACHINE: Cuts many metals including stainless steel, aluminum, titanium, cobalt, nickel alloys and cast iron. Includes....
  • GREAT CUSTOMER SERVICE: Backed by a 3-year warranty, we're committed to after-sales service. When you contact us, you speak with real technical....
Check Stock

Mophorn TIG/MMA Plasma Cutter CUT520 3 in 1 Combo Welding Machine Tig Welder 200A Arc Welder 200A Plasma Cutter 50A Non-Touch Pilot Arc Plasma Cutting Machine Dual Voltage 110 220V

  • Non Touch Pilot Arc: The non-contact guide arc allows you to cut without touching the metal, ensuring better cutting quality and longer component....
  • Suitable Cutting Thickness: Effectively cut rough, painted and rusty surfaces, and produce the least slag. The maximum ideal cutting thickness: 6 mm.
  • Distinct Panel & 3 In 1: The plasma cutter has CUT MMA TIG mode. The welding machine has knobs to support different current adjustment needs. The LCD....
  • Safety & Overheat Protection: The inverter plasma cutter has a built-in protection device, and the engine will automatically shut down when overheated....
  • Compact and Portable: Lightweight 37 pounds, with a comfortable handle, easy to install and store. Ideal for outdoor repairs, rusty metal, farm and....
Check Stock

Mophorn TIG/MMA Plasma Cutter CT312P 3 in 1 Combo Welding Machine Tig Welder 120A Arc Welder 120A Plasma Cutter 30A Non-Touch Pilot Arc Plasma Cutting Machine Dual Voltage 110 220V

  • Non Touch Pilot Arc: The non-contact guide arc allows you to cut without touching the metal, ensuring better cutting quality and longer component....
  • Suitable Cutting Thickness: Effectively cut rough, painted and rusty surfaces, and produce the least slag. The maximum ideal cutting thickness: 4 mm.
  • Distinct Panel & 3 In 1: The plasma cutter has CUT MMA TIG mode. The welding machine has knobs to support different current adjustment needs. The LCD....
  • Safety & Overheat Protection: The inverter plasma cutter has a built-in protection device, and the engine will automatically shut down when overheated....
  • Compact and Portable: Lightweight 32 pounds, with a comfortable handle, easy to install and store. Ideal for outdoor repairs, rusty metal, farm and....
Check Stock

Reboot Plasma Cutter Machine 50Amp Plasma Cutting Equipment CUT50D 3/5'' Cut 110/220V High Frequency 1/2'' Clean Cut,IGBT Air Plasma Cutting Machine for Aluminum Alloy Mild Steel Cast Iron

  • [Widely Application and Low Cost] 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation.this Plasma Cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work, repair/maintenance,metal processing,manufacture.
  • [SEE WHAT OUR CUSTOMER SAYS] I tried it on 120v with the air pressure turned way down on a piece of 1/8 angle iron the pilot arc worked as it should and it went through it like it wasn't even there. Next thing I tried it on was some roughly 3/8 wall tubing I needed to cut and notch for the safety cage on my figure 8 car..
  • [Generator Supported] This Plasma Cutting machine works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V,50A breaker for 110V.
  • [Blowing Back] Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and consumables.[110/220V Input ]Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • [Warranty] Buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.
Check Stock

Lotos CP243 Extended Plasma Cutting Torch for RED Color LTP5000D with 3-Prong Switch Connector 24 ft

  • 24Ft long pilot arc plasma cutting torch plasma cutting torch for RED Color LTP5000D.
  • NOT Compatible with BROWN Color LTP5000D.
  • One set of consumables is installed (1 nozzle, 1 electrode, 1Cup).
  • The compatible consumables for this torch are Loots PCON 20, PCON40, PCON90..
  • Can only be used for LOTOS pilot arc plasma cutter LTP5000D.
Check Stock

Plasma Torch Electrode Tip Drag Shield for Miller Spectrum 875 Cutter ICE-60T/TM 25pcs

  • 25pcs ICE-60T plasma torch consumables can fit Miller Spectrum 875 plasma cutter machine.
  • CAN NOT fit Spectrum 875 plasma cutter XT60 torch.
  • Plasma electrode x 10pcs, reference code 212724.
  • Plasma tip / nozzle x 10pcs, reference code 219676.
  • Plasma drag shield x 5pcs, reference code 212730.
  • This is ICE-60T plasma cutting torch aftermarket replacement item which manufactured by WS,not original.
Check Stock

Thermal Dynamics Cutmaster 42 40 Amp Tip 9-0094, 5 pack

  • 22pcs plasma cutting consumables can fit for Thermal Dynamics CutMaster 42 Plasma Cutter SL40 Torch (Torch Ref. Code 7-0040).
  • 10pcs Plasma Cutting Electrode,ref code 9-0096.
  • 10pcs Plasma Cutting Plasma Cutting Drag Tip, ref code 9-0094, cutting current is 40A.
  • 1pc adapter sleeve, ref code is 7-2915 and 1pc standoff guide ref code is 9-8251.
  • PLAXCON OEMed Plasma Cutting Torch Consumables which fit for thermal dynamics SL40 torch , not original.
Check Stock

YESWELDER 60 Pcs Plasma Cutting Consumables Fit Cut40 50 with Plasma Cutter Torch PT31 LG40

  • PACKAGE INCLUDED▶5 Pcs Cup-15 Pcs Electrodes-10 Pcs Ring-30 Pcs Tip(Standard).
  • HIGH GRADE MATERIAL ▶100% brand new and high quality.
  • APPLICATION ▶These consumables can work with ESAB/L-TEC PT-31, JG-40 and WSD-LG40 Cutting Torch, these torches for Plasma cutting machines such as CUT-40, CUT-40D,LGK-40, CT312, CT312D,CT416,CT416D,CT518, CT518D, Super160, Super160P etc.*For 40 and 50 Amps Cutting Machine.
  • CHARACTER ▶Plasma electrode tips nozzle extended shroud shield cup kit,plasma tip nozzle electrode extended cutting consumable.
  • OUR PROMISE ▶We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time.
Check Stock

YESWELDER 110 Pcs Plasma Cutting Consumables Fit Cut40 50 with Plasma Cutter Torch PT31 LG40

  • APPLICATION ▶These consumables can work with ESAB/L-TEC PT-31, JG-40 and WSD-LG40 Cutting Torch, these torches for Plasma cutting machines such as CUT-40, CUT-40D,LGK-40, CT312, CT312D,CT416,CT416D,CT518, CT518D, Super160, Super160P etc.*For 40 and 50 Amps Cutting Machine.
  • HIGH GRADE MATERIAL ▶100% brand new and high quality.
  • PACKAGE INCLUDED▶10 Pcs Cup-30 Pcs Electrodes-20 Pcs Ring-50 Pcs Tip(Standard).
  • CHARACTER ▶Plasma electrode tips nozzle extended shroud shield cup kit,plasma tip nozzle electrode extended cutting consumable.
  • OUR PROMISE ▶We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time.
Check Stock