Top Mill Chuck

uxcell Drill Chucks, 3/8-24UNF Threaded 1.5-10mm Capacity with Chuck Key for Electric Impact Corded Cordless Drill

  • [SIZE] - Clamping Range: 1/16"-3/8"(1.5-10mm), Mounting Thread: 3/8"-24UNF.
  • [CHUCK TYPE] - Keyed Drill Chuck, can be quick and easily replaced drill bits with chuck key(chuck key is included in the package).
  • [3-JAW] - Classic 3 jaws design drill chuck with excellent clamping capability. Quenching hardening and precision grinding to assure good wear-resistant.
  • [APPLICATIONS] - Suitable for drilling equipment such as portable drilling machine, bench drilling machines, milling machines, lathes, etc. It is compatible with many different types of drilling machines.
  • [MAINTENANCE] - Clean up the mechanical waste and foreign matter left in the drill chuck in time after using it. Use the appropriate chuck key for disassembly. Improper installation or disassembly of the drill chuck will increase the accuracy and runout value.
Check Stock

OrangeA K11-200 Lathe Chuck 8 Inch 3 Jaw,Self Centering Chuck Hardened Steel Jaws,Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

OrangeA K11-250 Lathe Chuck 10 Inch 3 Jaw, Self Centering Chuck Milling Hardened Steel, Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.24" / 6 mm - 9.84" / 250 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

Milton S-697-2 1/4 FNPT Euro Style Air Chuck

  • Unique design allows chuck to easily clip on to valve threads for hands free tire inflation.
  • Easy on style air chuck - press down on handle, push onto tire valve threads and release handle to grip threads.
  • Air chuck Euro style air chuck with grip chuck clip 1/4" Female NPT Max pressure 150 PSI Chuck clips on to tire valve Skincard.
  • Max. pressure: 150 pounds per square inch.
  • Milton is your number 1 source for Quality Air Accessories.
Check Stock

4-Jaw Self-Centering Chuck Set, Z011 Four Jaw Mini Lathe Chucks w/ Connecting Rod & Wrench, Mini Power Lathe Machine Replacement Parts Accessories (Type C)

  • 【3 Jaw or 4 Jaw Self-Centering Chuck Set for Mini Lathe】- Type B comes with 1 x Connecting Rod + 1 x Three Jaw Chuck + 2 pcs x Short Sticks.
  • Type C - 1 x Connecting Rod + 1 x Four Jaw Chuck + 1 x Wrench. This chuck connecting rod is suitable for Z011 Three Jaw or Four Jaw Woodworking Mini Lathe Chuck..
  • 【Mini Lathe Chuck & Connecting Rod Replacement】- You can use it to replace the old or brocken one. The clamping range of this chuck is between 1.8-56mm, which is suitable for clamping a variety of industrial parts..
  • 【Compact Size, Easy to Use】- Mini Lathe Chuck diameter about 48mm, Outer diameter about 12 mm-65 mm, Inner diameter about 1,8mm-56mm.
  • 2. Connecting Rod size about 5.2cm x 6mm/2.05x0.24inch (LxD), Connecting Thread about M12x1mm. Perfect for mini metal and wood lathes..
  • 【Stainless Steel Chuck Connecting Rod】- The Connecting Rod is made of High carbon steel material, anticorrosion, not easy to rust, durable and sturdy, ensure it has high hardness and can be reused..
  • 【Practical Power Lathe Accessories】- Our chuck connecting rod is stable and has great performance while using, it is the ideal choose for you. High accurate connecting rod so that they can better fit with the Mini Lathe Machine Parts..
Check Stock

PSI Woodworking CSCBARR52 Barracuda Insta-Change Jaw Chuck System

  • remove and replace all 4 jaws in less than a minute.
  • jaws will snap into place for a secure mount.
  • use the included jaw removal tool to pop them off the chuck body.
  • Instar-change jaw chuck system includes: barracuda chuck body, set of #2 round jaws, set of pen blank drilling jaws, woodworm screw chuck, jaw tightening key, jaw removal tool, storage case.
  • Barracuda chuck body: pre-threaded at 1" X 8TPI, weighs 4 lbs. , diameter 3. 5.
Check Stock

CXOYLL Z011A 4-Jaw Chuck for Mini Lathe, Self Centering Mini Lathe Chuck with L-Shaped Wrench, Zinc Alloy Chuck Clamp Accessory Inner Clamping Diameter 1.8-56mm (Silver)

  • 【Z011A 4-Jaw Chuck, FourJaw Mini Lathe Chuck】- 1. 4-jaw design, compact size, easy to use. The Mini lathe tools 4 Jaw Chuck has a large clamping range. Outer diameter about 12 mm-65 mm, Inner diameter: about 1.8mm-56mm..
  • 【Woodworking Accessories Self-centering 4 Jaw Lathe Chuck】- The self-centering lathe part contains a delicate oblique angle gear and pinion gears. They contribute to precise processing progress. Widely used for woodworking lathe..
  • 【Scope Applications of the Zinc Alloy Mini Lathe Chuck】- The 4 Jaw design Lathe Chuck is made of high quality zinc alloy material, wear-resistant, strong and durable. Mainly used for mini metal lathe. Since the changeover and setting time is cut, your lathe can work with higher efficiency..
  • 【Practical Lathe Accessories Self Centering Mini Chuck】- The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • 【Package included】- 1 x Lathe Chuck, 1 x L-shaped Wrench.
  • The 4 Jaw lathe chuck is widely applied to Mini metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machin....
Check Stock

Zassenhaus Pepper and Salt Mill Set, Wenge and Olive Wood, 7.0 Inch

  • High-quality Salt and Pepper Mill Set by Zassenhaus.
  • Patented CeraPlus ceramic grinding mechanism Made in Germany, harder than carbon steel and won't corrode over time.
  • 6-position dial adjusts from coarse to fine grind / Unscrew top knob to fill mill.
  • Practical, as salt mill & pepper mill distinguishable by light and dark color. Walnut wood (mill pepper / dark), olive wood (salt mill, light), 7.0" x 1.8".
Check Stock

GODESON Air Chuck Locking Air Chuck use for Tire Inflator Nozzles Pack of Clip-on and Twist-on Chucks Pack of 2pcs

  • 1. HEAVY DUTY BRASS CONSTRUCTION of tire chucks with lock on make the tire air chucks durable and Reliable..
  • 2. INTERCHANGEBALE AIR CHUCKS- including Clip-on chuck and Twist-on chuck(thread on) in 1 package. You just choose it for different using. Clip- on....
  • 3. SMART DESIGN with Large Bore of tire air chuck, Open flow through for heavy duty air chuck, while close flow through for clip-on chuck.
  • 4. UNIVERSAL CONNECT TYPE ,1/4-Inch Female NPT, 3/4-Inch Hex Air Chucks, Fits Standard 1/4" NPT Fittings.
  • Quick connect tire inflator chuck, Designed to use with Inflator and pressure gauge. LIFETIME 100% Satisfaction....
Check Stock

Mudder 2 Pieces Portable Air Chuck Set Including S699 1/4 Inch Closed Ball Tire Air Chuck and S690 1/4 Inch Fnpt Dual Head Air Chuck for Tire Inflator Gauge and Air Compressor

  • Package includes: the portable set includes 1 piece S699 1/4 inch closed ball air chuck and 1 piece S690 1/4 inch fnpt dual head air chuck, this....
  • S690 Dual head air chuck: with 1/4 inch female national pipe thread, and the maximum air pressure is 150 pounds per square inch, it has the function....
  • S699 Closed ball air chuck: with 1/4 inch fnpt air inlet, its function is to enable the shutoff valve to shut down the air flow when the stem is not....
  • Easy to install: when you want to use closed ball air chuck or dual head air chuck to work, which just needs to be connected by screw rotation, the....
  • Sturdy material: the closed ball air chuck and dual head air chuck are made of brass mainly, they have good corrosion resistance and wear resistance,....
Check Stock

Lathe Chuck, K72-80 4 Jaw 3.15 Inch 4000r per min Independent and Reversible Jaw Metal Lathe Chuck Turning Machine Accessories with 1 Hex Wrench and 3 Screws

  • HIGH QUALITY: The K72-80 Lathe Chuck is 100% brand new and high quality, hardened and durable in use..
  • WHOLE SET: The package of this Lathe Chuck includes 1 x 4-Jaw Lathe Chuck, 1 x Hex wrench and 3 x Screws..
  • FEATURES: Each jaw of 4-Jaw Lathe Chuck is independently adjustable and reversible. The speed is 4000r/min. The chuck diameter is approx. 80mm / 3.15in..
  • SUPERIOR PERFORMANCE: The Metal Lathe Chuck can be adjusted Independently to center suitable for processing special with superior gripping Force..
  • LONG LASTING: Vulnerable parts of the Chuck Lathe Parts are specifically engineered by quenching, for greater durability and extended life..
Check Stock

Chuck handtite keyless 1/2-Inch carded

  • For those that prefer traditional keyed drill chucks, these chucks offer precision and nearly unlimited mechanical advantage for tightening and loosening drill bits and tooling. These 1/32" - 5/8" JT33 Taper drill chucks have knurled grips and the chuck key is included..
  • Arbor hole tapers from .80 inches at the opening (bottom of chuck) to .78 inches 1/2" down into the arbor hole. This gives a good fit profile for getting the correct chuck for your drill press.
Check Stock