Top Module System

AOICRIE 2PCS DS3231 Real Time Clock Module RTC Clock Memory Module 3.3V/5V for Raspberry Pi (2PCS Yellow)

  • The RTC clock module is of complete clock calendar functions include seconds, minutes, hours, day, date, month and year timing , provide valid until the year 2100 leap year compensation.
  • The RTC clock module is of ±3℃ digital temperature sensor, and the timing accuracy kept at ± 5ppm (± 0.432 sec / day).
  • The RTC clock module has the characteristic of low power consumption, with 1 Hz and 32.768 kHz output.
  • The RTC clock module itself can be adapted to 3.3 V and 5 V system, with -40 ° C to +85 ° C temperature range, easy and convenient to use.
  • for Raspberry pi highest precision clock module DS3231, note board can also use this module..
Check Stock

Viper VSM550 SmartStart Pro GPS Module

  • 5806V LED 2-Way Remote Start Car Alarm System 1 mile range Silent Mode2 siren-less arming modes 2-way Responder LE remote.
  • DB3: remote start/security integration module.
  • VSM550: SmartStart GPS Module for a remote start system.
  • features include lock/arm, unlock/disarm, remote start, trunk release, panic button, and 2 auxiliary channels.
Check Stock

Programmable Voice System model 516L

  • Adds English or Japanese Voice Messages to Security System.
  • Control Module, Speakers, and Wire Harnesses Included.
  • Pre-programmed messages in English and Japanese.
  • Record nine different five second messages with microphone.
Check Stock

5PCS HC-05 Wireless Bluetooth Receiver RF Serial Transceiver Module Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module

  • HC-05 Bluetooth Module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup..
  • Default baud rate:9600, Button: Press the button.
  • the module enter the AT mode. AT commands are executed only in AT mode..
  • HC-05 is able to operate in both master and slave mode. Its communication is via serial communication which makes an easy way to interface with controller or PC. It's ideal replacement to your wired serial connection..
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your motherboard project, and then you can use your android phone to control some gadgets, such as: switch, LED..
  • Note: The module doesn’t suitable for IOS system..
Check Stock

Nordic BLE 4.0 nRF51822 Controller Chip Bluetooth Module Small Size 18.5 x 9.1x 2.0mm 5 Pack

  • YTX51822-S01 is a high performance ,low power radio transmit and receive system module based on Nordic BLE 4.0 nRF51822 controller chips..
  • It has the smallest volume package in the industry, the size is 18.5 X 9.1X 2.0, suitable for most applications which pay more attention to the size..
  • The module integrate the complete standard low energy Bluetooth 4.0 protocol stack S110 drive..
  • Customer's MCU is connected to the module by UART port, it will automatically send a broadcast code after the module starts..
Check Stock

Ketron SD2 Sound Module

  • Dual-function module: envelope follower AND attenuverter / offset generator.
  • Envelope Follower: Use a guitar/microphone/phone etc to trigger envelopes and gates in your Eurorack system.
  • Attenuverter: Attenuverts your voltage sources up to two times in the positive or negative.
  • Offset Generator: Provides up to 5 volts in the positive or negative.
  • Specifications: Module width: 4HP, Module depth: 48mm. Current draw: +12V: 25mA, -12V: 18mA.
Check Stock

FrSky Tandem X20S Transmitter with Built-in 900M/2.5G Dual-Band Internal RF Module

  • Built-in TD 900M/2.4G Dual-Band Internal RF Module Supports Multiple Working Modes 2.4G ACCST D16Mode (Compatible with ACCST Receivers with D16 V2 or later FW) 2.4G ACCESSMode (Compatible with ACCESS Receivers) 900M ACCESSMode (Compatible with ACCESS R9 868/915MHz Receivers) (*Capable of simultaneous working under ACCESS mode) 2.4G & 900M TD Mode (Compatible with TD Receivers).
  • Super-low latency and long-range control with telemetry (*Up to 50 to 100KM range and down to 4ms end-to-end latency) 800*480 Color Touch-Screen Displays 6 Quick-Mode Custom Buttons (Front) and 2 Momentary Buttons (Rear) Lite Type External Module Bay Built-in 6-axis Gyroscope Sensor All CNC Metal Trims, Knobs.
  • Haptic Vibration Alerts and Voice Speech Outputs Supports SWR Indicator Warning Supports Recharge System for 2S Li-ion Battery (USB Type-C Interface) High-speed PARA Wireless Training System (Compatible with FreeLink App3.0) Built-in Audio Wireless Module (Compatible with Bluetooth Audio Device).
  • All CNC High-Precision Hall-Sensor Gimbals with 10 Ball-Bearing, adjustable 45° to 60° stcik travel and 8° rotatable panel. ETHOS: The more pow....
Check Stock

RPi 3.3V to 5V 26 I/O Bidirectional Voltage-Level Shifter Module for Raspberry Pi, Logic Level Converter

  • Reliable and suitable for a wide range of uses..
  • High conversion efficiency, simple regulating operation..
  • Modbus TCP Ethernet Remote IO Module (8DI+8DO+8AI+RJ45+RS485).
  • The M160T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module,.
  • It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, monitoring system, automatically measurement and control system..
Check Stock

KEYESTUDIO Starter Kit V2 for Arduino with RJ11 Connector, Great STEM Education Kit for Students, Teachers and Hardware Enthusiast

  • Whenever you and your family go for vacations, you may used to get worried about your plants because they need water on regular basis. We develop this Automatic Plant Watering System to solve this problem as plants need water according to the moisture level of soil..
  • The kit includes a plus controller, DHT22 temperature and humidity sensor, I2C LCD, push button modules, power amplifier module, DS3231 clock module, non-contact level liquid sensor, motor driver module, capacitive soil humidity sensor, and pump..
  • More than 13 well-selected electronic modules and 17 step by step creative tutorials. Full example code is provided and explained and even includes useful software tool..
  • Multi-purpose: timing watering mode, and the sensor detection mode that when the soil is dry, Arduino will command the water pump to run(up to 4 plants at once)..
  • Our system measures the soil moisture and waters automatically according to it. A audio power amplifier module tells us when the bucket is empty. I2C LCD displays the temperature and humidity..
Check Stock

20W Laser Module Kit for 3018 CNC Router Machine, IKLESTAR 5.5W Optical Power 12V 450nm Laser Head for 3018 Pro/3020 PLUS, Engraving Tool for Wood and Metal DIY

  • 【Excellent 20W Laser】The optical power of laser module is 5.5W. It has 0.08mm sharp compressed focal point and 0.01mm engraving accuracy. The cutting speed is faster, and the engraving accuracy is higher.
  • 【Fixed Focus & Powerful】The fixed focus distance is 20mm. At the same power, this laser module can cut 4mm wood perfectly at once. It is ideal for engraving and cutting many different materials such as plywood, bamboo, cardboard, acrylic, MDF, etc..
  • 【Long Service Life】Equipped with high-quality aluminum heatsink and cooling fan, this can help the heat dissipate faster and ensure the module works continuously. This laser module can work at full power for 8 hours. The service life can be up to 10,000 hours.
  • 【Widely Applicable】Our laser module is compatible with LaserGRBL, LightBurn and most engraving software. LaserGRBL software is compatible with Windows system, LightBurn is compatible with Mac OS and Windows system. Compatible with engraving machines and CNC milling machines 3018 series.
  • 【Customer Service】We are proud of our customer service and providing 1....
Check Stock

DWEII 2 Pack GPS+BDS Dual-Mode Module Flight Control Satellite Positioning Navigator, ATGM336H Replacement NEO-M8N NEO-6M for Arduino

  • Application areas: Car positioning in navigation.
  • Mobile phones, tablet PCs, handheld devices.
  • 2PCS ATGM336H Chip GPS+BDS Beidou dual-mode positioning navigation module.
  • The ATGM336H-5N series module is a generic term for the 9.7 * 10.1-size high-performance BDS / GNSS constellation positioning navigation module family.
  • Excellent positioning and navigation functions,support single-system positioning of BDS/GPS/GLONASS satellite navigation systems,and any combination of multi-system joint positioning,and support QZSS and SBAS systems.
Check Stock

MPC Emergency Manual Release Kit for Shaved Doors/Door Poppers

  • Built-in Relays - The new control module has built-in relays which eliminates 90% of wiring for a cleaner, faster, simplified installation. This system will shave AT LEAST an hour off the install time.
  • Single wire connections: No need to buy extra wire or make splice connections. Our new control module includes a wiring harness w/1 WIRE to run to each side of the vehicle & connect to the solenoid.
  • Programmable Safety Feature - To prevent accidents, our new control module automatically disables the door popper system if it sense that the vehicle is running.
  • Redesigned Remotes - Sleek two-button design w/a sliding cover to prevent accidental door opening while the remote is in your pockets. Press both buttons at the same time for optional trunk release!.
  • (2) Heavy-duty solenoids (45 lb. max pulling force), (2) chrome door poppers, RC receiver w/built-in relays per door, (2) 2-button 3 transmitters, (2) push buttons, steel linkage cable.
Check Stock