Top Multi axis Machine

2 Pieces MPU-9250 GY-9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor I2C SPI 3-Axis Gyroscope Accelerometer Magnetometer Sensor Module

  • Basic information: module model: GY-9250.
  • Power supply: 3-5V (internal low dropout voltage regulator).
  • Communication: standard IIC communication protocol.
  • Internal structure: this module uses the MPU-9250, and combines a 3-axis gyroscope, a 3-axis accelerometer and a 3-axis magnetometer which are integrated into a single QFN package.
  • Reliable chip: the MPU-9250 integrates a 3-axis magnetometer AK8963, which features smaller size compared to previous generation and sensitivity improvement with 0.15 μT/ LSB.
  • The 16-bit AD converter is embedded in the chip, with 16-bit data output.
  • Quality process: the 9-axis sensor module features the immersion gold PCB, which uses the machine welding process to make it work fine.
  • Applications: DTV and set-top boxes are applied to internet connection.
  • Wearable sensors are applied to fitness equipment and sports.
Check Stock

High Speed Belt Drive Linear Guide Rail 200mm Motion Slide Actuator Module +Nema23for CNC Linear Position Kit

  • High precision belt driven linear actuator, the positioning repeatability is ± 0.1mm.
  • Convenient and Easy in use, Smooth operation and low noise,maximum speed 500mm/s.
  • Comes with 1.3N.m NEMA23 motor and foot mounting bracket, free to replace.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use..
Check Stock

Genmitsu CNC Machine 4040-PRO for Wood Acrylic MDF Nylon Carving Cutting, GRBL Control, 3 Axis CNC Router Machine, Working Area 400 x 400 x 78mm (15.7” x 15.7” x 3.1”)

  • New Steel HSS Frame - all new redesigned frame structure, each axis is composed of two 16mm Steel HSS linear tubes and a lead screw motion drive, dual Y axis rails, and all metal frame. This new high-rigidity structure ensures the stability and accuracy of the CNC machine..
  • Still based on open-source Grbl v1.1, the 4040-PRO CNC router has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. Upgrades include extended function ports like a dedicated 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port..
  • All main parts are pre-assembled and it just takes about 15 minutes to finish the whole machine assembly. The spoilboard is combined by two pieces of MDF boards. Each MDF board could be replaced individually. You don’t need to replace the whole spoilboard when a panel gets damaged..
  • The extra spindle mount, laser module and other upgraded accessories are available for order. You could upgrade the machine easily based on your needs. If you get stuck, check out the SainSmart Resource Center (see at User Guide) or contact us with any questions ....
Check Stock

HTPOW Laser Engraver, Laser CNC Carving Machine , Large Area Printer cutter engraver 16.1'x14.5', Support Win/MAC/OS/Mobile WiFi Connection, Apply to Wood, Bamboo, Acrylic, Leather (20W)

  • 【Innovative Eye Protection Design】HTPOW l wood cutter machine,The wood engraver protective cover perfectly protect your eyes,filter UV light for 97%. You can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles, prevent pets and children from grabbing the laser spot..
  • 【High-Precision & Easy Installation】DIY laser cutter engraver machine adopts Aluminum alloy guide rails and rubber pulleys, smooth running, precise engraving, high-quality laser, precise beam control, engraving accuracy of 0.01mm.
  • engraving area of 16.14×14.57''.The entire engraving machine adopts a modular design, replace and update cnc laser cutter engraver machine parts. And the assembly can generally be completed within 10-20 minutes..
  • 【Upgraded Auto Focus Function:】 wood laser cutter engraver machine no need to adjust the focus before engraving.
  • the new metal laser focal spot is 50% smaller than other wood engraving machine , new wood carving combines precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser..
  • 【Wide compatibility & Precise scale lines axis】There are precise scale lines on the X-axis and Y-axis to facilitate....
Check Stock

High Speed 400 MM 16 INCH Stroke Belt Drive Linear Guide Rail Motion Slide Actuator Module for CNC Linear Position Kit

  • High precision belt driven linear actuator, the positioning repeatability is ± 0.1mm.
  • Convenient and Easy in use, Smooth operation and low noise,maximum speed 1500mm/s.
  • Comes with NEMA 23 motor base(not motor) and foot mounting bracket, free to replace.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use..
Check Stock

High Speed 700 MM 28 INCH Stroke Belt Drive Linear Guide Rail Motion Slide Actuator Module for CNC Linear Position Kit

  • High precision belt driven linear actuator, the positioning repeatability is ± 0.1mm.
  • Convenient and Easy in use, Smooth operation and low noise,maximum speed 1500mm/s.
  • Comes with NEMA 23 motor base(not motor) and foot mounting bracket, free to replace.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use..
Check Stock

3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

Linear Stage Actuator 200mm Manual Sliding Table Ballscrew 1605 Linear Guides Cross Slide Table SFU1605 Travel Length L100/200/300/400/500/600mm (200mm)

  • Rounded front and rear plate design, precision hole position processing..
  • Stroke: 100mm/200mm/300mm/400mm/500mm/600mm(optional).
  • Sliding table height: 66mm, width: 93mm, floor thickness: 11mm.
  • The sliding table is convenient and easy in use, can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use..
Check Stock

uxcell LM6UU Linear Ball Bearings 6mm Bore 12mm OD 19mm Length for CNC Machine 3D Printer 4pcs

  • SK20 Aluminum Linear Motion Rail Clamping Guide Support.
  • Made of Aluminum material, corrosion resistance and long life..
  • Low friction resistance can get high precision rotating in the smooth movement..
  • Widely used in multi-axis machine, installed the sliding parts such as industrial machinery..
Check Stock

Panasonic LUMIX GX9 4K Mirrorless ILC Camera Body with 12-60mm F3.5-5.6 Power O.I.S. Lens, DC-GX9MK (USA Black)

  • 20.3 MP high resolution MOS Sensor with Tuned 3 Dimensional Color Control to detect hue, saturation and brightness for optimal results.
  • 5 Axis Dual I.S. combines an O.I.S. (Optical Image Stabilizer, 2 axis) and an I.B.I.S. (In Body Image Stabilization, 5 axis).
  • 5 axis Dual I.S. enables up to 4 stop slower shutter speeds.
  • Live View Finder 2760k dot high resolution LFV tilts up by approx. 80 degrees with nearly 100% color reproduction.
  • 1. 39x / 0. 7x (35mm camera equiv.) magnification and 100% field of view.
  • 49 Focus Points plus Custom Multi AF mode quickly and freely select focus blocks from via the touch enabled LCD screen.
  • [4K Technology] 4K 30p video, 4K Live Crop and 4K PHOTO burst with a new Light Composition mode to capture perfect moments.
Check Stock

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

Electric Linear Rail Guide 200mm Ballscrew 1605 Slide Stage Load 250kg Nema23 Motor Base for DIY CNC Z Axis

  • Stork:200mm/8” 400mm/16” 600mm/24” 800mm/32”.
  • Double HG15 Heavy Duty Linear Rail Guide and SFU1605,Ball screw accuracy: C7(±0.02mm).
  • Equipped with BK12 Special shaft end support and high-intensity motor bracket.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Convenient and Easy in use, Smooth operation, high speed and low noise,can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use.
Check Stock