Top Na2s xh2o

2Packs Wathai 40x40x10mm 40mm 12V Brushless Turbo Blower Centrifugal Fan 2Pin

  • Package include: 1 Piece fan and mounting screws & nuts.
  • Dimension: 40mm(L) x 40mm(W) x 10mm(H) / 1.55×1.55×0.4 in. per fan.
Check Stock

Wathai 2Pin 120mm x 38mm 12V DC Brushless Cooling Fan High Airflow Cooler Fan

  • 1 Piece fan include fan grill and mounting screws & nuts.
  • Dimension: 120mm(L) x 120mm(W) x 38mm(H) / 4.72×4.72×1.5 in. per fan.
Check Stock

Wathai DC Exhaust Cooler Fan 60mm x 60mm x 15mm 12V 2Pin Brushless Cooling Fan

  • Dimension: 60mm(L) x 60mm(W) x 15mm(H) / 2.37×2.37×0.6 in. per fan.
Check Stock

Gdstime 80mm x 80mm x 10mm DC 5V 0.25A Brushless Cooling Fan

  • Size: 80x80x10mm or 3.15×3.15×0.39 inches.
  • Rated Power: DC 5V 0.25Amp, Bearing type: Sleeve.
  • Efficient 11-blade fan design for increased cooling at lower speeds.
  • RoHS compliance for protecting the environment.
  • Silent operation at 25 dB-A for excellent case cooling.
  • Package include: 1 Piece fan include mounting screws & nuts.
Check Stock

GDSTIME Dc 12V 60mm 6cm 60x60x25mm 2 Wire Brushless Cooling Fan

  • Package include: 1 Piece fan include mounting screws & nuts.
  • Dimensions: 60mm(L) x 60mm(W) x 25mm(H) / 2.36” x2.36”x0.98”(L*W*H).
  • Life: working up to 35000h at 25 degrees..
  • (-): Black wire. This is a two wire cooling fan..
Check Stock

WINSINN DC 80mm Fan 5V 8015 Sleeve Bearing Brushless Cooling 80mmx15mm 2PIN Pack of 2Pcs

  • ✔️Bearing: Sleeve Bearings, Cheap, Use time no more than 12 hours / day, life: 30,000 Hours..
  • ✔️Rated Voltage: DC 5V, Current: 0.3A, Power: 1.5W.
  • ✔️Speed: 3000PRM, Air Pressure: 2.4mmH₂O, Airflow: 33.6CFM, Noise: 31.5dBA.
  • ✔️Connector & Line length: XH2.54 – 11.8in(300mm), Size: 80mm x 80mm x 15mm.
  • ✔️Made by WINSINN. Warranty: 1-years for Sleeve Bearings Fan..
Check Stock

GDSTIME 92mm x 92mm x 25mm 12V Dual Ball Bearings Brushless Cooling Fan

  • Package included: 1 Piece fan include fan grill and mounting screws & nuts.
  • Dimensions: 92mm(L) x 92mm(W) x 25mm(H) / 3.62in(L) x 3.62in(W) x 0.98in(H).
  • Life: working up to 50000h at 25 degrees..
  • (-): Black wire. This is a two wire cooling fan..
Check Stock

GDSTIME 75mm x 30mm 7530 DC 12 Volt Brushless Turbo Blower Cooling Fan

  • Package include: 1 piece fan include mounting screws & nuts..
  • Dimensions: 75mm(L) x 73mm(W) x 30mm(H) / 2.95” x2.87”x1.18”(L*W*H).
  • The wide of inlet is 48mm / 1.9in； The Length of outlet is 36.5mm / 1.44in ±0.3.
  • The Wide of outlet is 24.7mm / 0.97in ±0.3.
  • (-): Black. This is a two wire dc blower fan..
Check Stock

Wathai 40mm x 20mm DC Brushless Cooling Blower Fan 24V 2Pin 2 Pcs

  • widely used in humidifier, aromatherapy and other small appliances series.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • Warranty: One-year quality assurance. Please contact us If the product has any quality problems, it will be replaced within one year..
  • Dimension: 40mm(L) x 40mm(W) x 20mm(H) / 1.55x1.55x0.78 in. per fan.
Check Stock

GDSTIME 60mm x 60mm x 15mm 5V 2PIN DC Brushless Cooling Fan

  • Dimension of outer the frame is 60mm(L) x 60mm(W) x 15mm(H) / The size of fan in inch is 2.36in(L) x 2.36in(W) x 0.59in(H).
  • Operating Voltage Range：4.5V to 5.5V. (overtake to 5.5V, it can also work. but not safe, and seriously affects lifespan of fan.).
  • Life: working up to 35000h at 25 degrees..
Check Stock

Propel X01 Micro Drone USB Battery Charger Maximum Rooftop pl-1390

  • The USB plug can be connected to the computer, mobile phone charger, mobile power supply for battery charging, easy to use..
  • Can be used with XH2.54 revolving JST bus conversion cable, and it can charge 3.7V lithium battery through JST plug, which is more widely used..
  • The 3.7V lithium battery can be accurately charged, and it will automatically stop charging after being fully charged without overcharging..
  • Safe to use, just connect the USB cable to the device to charge normally without monitoring..
  • Small size, easy to carry, allowing to charge the battery anytime and anywhere, suitable for X5C, 818a, X1, X4, HS170, X300, X400, F181, F180 quadcopter, etc..
Check Stock

HysiPrui 24V 5015 Fan Blower Turbo Cooling Fan 50x50X15mm 120CM Removable Cable for 3D Printer Extruder Fan

  • REMOVABLE: Each fan is divided into two parts, cable length is 100cm and 20cm.
  • EASY TO REPLACe: When the fan is broken, you can just replace it and no need to disassemble the other part.
  • WEIGHT AND VOLTAGE: about 60g. Operation Voltage: DC 24V.
  • CONNECTORS: Middle connector is red JST connector. Motherboard side is XH2.54 2 Pin.
  • KINDLY NOTE: Please do not use one part (of the fan) from our store, the other part from other store..
Check Stock