Top Nipple Fittings For Water Lines

DoubleWood 20Pcs Chicken Nipples Horizontal Side Mount Poultry Water Nipple Waterer Drinker Outdoors for Chicken Ducks Quail and Other Poultry (20)

  • MATERIAL- Made with durable plastic and stainless steel, last long time in outdoor exposure use..
  • EASY TO INSTALL- Just drill a hole in the side of your container and tighten the chicken nipple in by hand..
  • AUTOMATED- This horizontal chicken waterer will release water only if the steel rod is triggered by the flocks and then shuts off whenever no bird is striking into it. All you need to do is refill the bucket/container whenever water is runs out..
  • SUGGESTION- One nipple per every 4 chickens / poultry. Chicken nipples waterer require a low-pressure water source. When it is connecting to household water lines, a pressure regulator will be need..
Check Stock

Rustic State Industrial Plumbing Gooseneck Connector Iron Pipe Rust Free 3/4 Inch for DIY Projects Black Set of 10

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

RIDGID 48553 MegaPress Jaws And Rings, 1/2 Inch to 2 Inch MegaPress Kit, Hydraulic Crimping Tools

  • Ideal for black iron pipe in chilled water lines, natural gal lines, compressed air, heating fuel oil, and is FM and UL approved (pending) for the installation of fire sprinkler systems.
  • The MegaPress Jaws and rings and RIDGID Press Tools work together to allow press connections on “wet” sprinkler systems.
  • No Flame Required - MegaPress fittings and RIDGID Standard Press Tools work as a flameless system that eliminates the need for hot work permits.
  • Backed by RIDGID Full Lifetime Warranty against material defects and workmanship.
  • For use with MegaPress and MegaPress G fittings to join 1⁄2 inch to 2 inch commercially-available black iron pipe schedules 5-40.
Check Stock

Watts Premier 560075 Sensor Valve Kit for Hot Water Recirculating System

  • Additional Sensor Valve Kit for use on branched hot water lines with Watts Premier Hot Water Recirculation Pumps coming from the water heater. Kit comes complete with one sensor valve, two 12 inch supply lines with fittings..
  • Compatibility: This valve works only with models 500800, 500803, 500805, and 500899..
  • This kit must be used in conjunction with either a 500800 or 500805 Hot water Recirculating Pump. It is NOT designed to be used with a dedicated return line to the water heater..
  • Product Dimensions: Width: 1 3/8 inches, Length: 4 5/16 inches.
Check Stock

Charlotte Pipe 3' Cap Bushing Pipe Fitting - Socket Schedule 40 White PVC Highly Durable, Easy to Install, High Tensile and Sound Deadening for Home or Industrial Use (Single Unit)

  • PVC SCHEDULE 40: Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • CHARLOTTE PIPE PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines.
  • MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA..
Check Stock

Reed Tool PPR200 Clean Ream Extreme with 3/8-Inch Hex Shaft, 2-Inch Head

  • Reams 2-Inch Sch. 40 PVC, CPVC and ABS Fittings.
  • Can be used with standard drills, cordless drills, or impact drills.
  • Works great for vent lines, drain lines, water lines.
  • Feature a 4-sided carbide insert which provides an extra cutting edge after 180-Degree cutting insert rotation.
  • PPR Fitting Reamers are NOT recommended for use on pressurized systems.
Check Stock

Hilitchi 106-Pieces Metric Brass Hydraulic Grease Fitting Assortment Set - Straight, 45-Degree Angled Zerk

  • 【✔】High Quality Brass Grease Nipple Fittings Kit.
  • 【✔】Set Includes 6 Most Used Sizes: M6, M8, M10, Straight, 45-Degree【 Please See Picture 2 for Specific Dimensional Size】.
  • 【✔】Made of Good Quality Brass and are Hardened to Prevent Wear. Anti-corrosion and Durable.
  • 【✔】Package Quantity: 106-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box.
  • 【✔】The Grease Zerk Nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, it will not slippery when rotating. Suitable for most automotive, motorcycle, truck, farm, and industrial applications..
Check Stock

SharkBite U256LFCP 3/4 Inch 90 Degree Elbow Push to Connect Pipe Fitting, 10 count, Brass

  • INSTALLS IN SECONDS: Repair with no special tools, soldering, crimping, or glue.
  • Just push to create a quick watertight union with SharkBite pushfit connectors.
  • VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination.
  • LEAD-FREE: Made of high-quality forged DZR brass that is lead-free. Ball valves, shutoffs, and compression fittings, are safe for potable water lines.
  • PREFERRED BY THE PROS: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
  • MADE IN THE USA: All SharkBite valves, joints, and adapters are manufactured and tested in the USA.
Check Stock

SpringSpray 1-1/2\ NPT Male x 1-1/2\ NST (NH) Male Brass Hexagonal Nipple Fitting Fire Equipment Hex Nipple Doule Male Fire Hose Adapter

  • ...UE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes.
  • ⚒【WIDE APPLICATION】- Male to male adapters are used to bridge two female hose, pipe or valve fittings. Suitable for use in general firefighting applications. Brass fire hydrant adapter fittings are used for connecting fire hose, PVC pipe, and other low-pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military, and civil protection.
  • ⚒【100% SATISFACTION SERVICE】-We have a professional product development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you solve it perfectly.
Check Stock

Pipe Décor 1½ in. x 6 in. Black Steel Pipe, Pre-Cut, Industrial Steel Grey Fits Standard 1½ Inch Black Threaded Pipes, Nipples and Fittings, 6 Pack

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

Hilitchi Hydraulic Zerk Grease Fittings Assortment Kit with Grease Zerk Caps (SAE-174PCS)

  • 【✔】Made of Good Quality Brass and are Hardened to Prevent Wear. Anti-corrosion and Durable. The Grease Zerk Nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, it will not slippery when rotating..
  • 【✔】174Pcs Assortment kit SAE grease fittings. Sizes include: SAE standard, inch size,Straight 1/4”-28 (25pcs).
  • We include 60pcs grease fittings caps can prevent the grease fittings from corrosion and contaminants..
  • 【✔】GREAT USES: Our Straight & Angled Fittings are helpful to feed lubricant to your bearings and other mechanical devices without disassembly. Suitable for most automotive, motorcycle, truck, farm, and industrial applications..
  • 【✔】NICE ASSORTMENT KIT: 174-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box.
  • 【QUALITY AFTER-SALE SERVICE】If you do not satisfy with our products or if you have any questions, please come to us, we would reply you within 12hours. We would solve all the problems to your satisfactio....
Check Stock

Premium Industrial PVC Pipe Schedule 80 Grey 2 Inch (2.0) Grey/PVC / 5 FT

  • ... designs of bookshelves, desks, tables,and television stands. Suitable for steampunk lamps, rustic shelves, antique decorations, and vintage-retro themed furniture.
  • ✔HIGH QUALITY INDUSTRY CERTIFIED: We constructed our premium black pipes to meet Industry Standards. They can easily attach to other threaded pipes or fittings. They are graded ASME B1.20.1 and ASTM A53 for black pipe nipple. National Pipe Thread Taper (NPT) Male threads on both ends to connect to female threaded pipes or fittings. Feel the quality with our Premium Black Pipes.
  • ✔AUTHENTIC MALLEABLE IRON: Don't accept cheap imitations with CMI inc know that you are receiving Top quality High Industrial Grade Premium pipe. Feel the difference with weight and feel of our product.
  • ✔30-DAY MONEY BACK GUARANTEE: If you are not satisfied with our product please contact us and allow us the opportunity to resolve any issue you may have. Customer satisfaction is always our top priority..
Check Stock