Top Non ferrous End Mills

Kodiak Cutting Tools L3-OFFT-21LF USA Made Micrograin Carbide Ball Nose End Mill Set, 4 Flute, 1/8\ to 1/2\ (Pack of 6)

  • Contains Kodiak Cutting Tools brand premium quality USA made ball nose solid carbide end mills.
  • 4 flute ball nose end mills are center cutting and made from premium sub-micrograin carbide.
  • Stub length end mills for extra rigidity.
  • Fitted wood block stand included and each size comes in a marked plastic tube.
  • Contains 1pc of each diameter: 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2.
Check Stock

FOXBC Fine Wood 4-inch Pin End Scroll Saw Blade Replacement for Dremel Moto-Saw MS52 - 12 Pack,18 TPI

  • Easy installation and easy handling, easy to use and highly durable.
  • 4-Inch Pin End Scroll Saw Blade Replacement For Dremel Moto-Saw MS20 MS20-01 MS51-01 MS52-01 MS53-01.
  • These blades are designed for cutting wood, plastic and thin non-ferrous metals (copper, zinc, brass, lead and aluminum).
  • FOXBC brand of scroll blades are designed for the professional Craftsman who needs sharp, long lasting blades. These blades are precision sharpened for easy cutting of fine, intricate shapes. Offered in a variety of TPI and widths, these blades are recommended for cutting most woods, plastics and non ferrous metals..
Check Stock

Freud LU77M010 10-Inch 80 Tooth TCG Thin Kerf Non-Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor

  • TCG Thin Kerf Non-Ferrous Metal Cutting Saw Blade.
Check Stock

YG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
  • Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
  • Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Check Stock

HHIP 1/2 INCH R8 Shell END Mill Holder (3900-1711)

  • Diameter for Bore in Shell End Mill 1/2".
  • Diameter range of standard end mills is 1-1/4 to 1-1/2"..
Check Stock

Rockwell RW8981K Sonicrafter Oscillating Multitool End Cut Blades with Universal Fit System, 6-Pack

  • (2) RW8932 1-3/8-Inch stand wood end cut blade, (2) RW8935 1-3/8-Inch precision end cut blade, (2) 1-3/8-Inch bi-metal and wood end cut blade.
  • Use the RW8932 blade to cut wood, plastic, and drywall.
  • Use the RW8935 blade to cut wood and soft plastics.
  • Use the RW8929 blade to cut wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal, and hardened fillers.
  • Universal fit system adapts to other brands.
Check Stock

Micro 100 TM-100-8X Solid Carbide Precision Thread Mill, AlTiN Coated, 2 Flutes, 0.100\ Cutter Diameter, 0.050\ Neck Diameter, 1/2\ Neck Length, 0\ Flat, 0.032\ Thickness, 32 to 64 Threads per Inch, 1/8\ Shank Diameter, 1.5\ Overall Length

  • Engineered for milling precision I.D. and O.D. threads in all types of steels, non-ferrous metals and exotic metals.
  • Equally effective in laminated plastics, fiber glasses and composites used in the aircraft industry.
Check Stock

HHIP 3600-0056 End Mill Grinding Fixture (Angle) 5C

  • Solid negative ball stops with 15 degrees spacing fast & easy set-ups..
  • Can be used for grinding 2-3-4-6-8 and 12 flute end mills.
  • This fixture takes 5C round collets for grinding end mill 1/16" ~ 1-1/8" .Clearance & relief angels are built into the base.
  • Shell mills can easily be held with Straight Shank arbors.
  • Clearance & relief angels are built into the base.
Check Stock

Annular Cutters 8pcs/Set,2''Cutting Depth,3/4''Weldon Shank,(9/16,11/16,13/16,15/16,1,1-1/16)inch Cutting Diameter Annular Cutters,OSCARBIDE HSS Slugger Bits,Mag Drill Bits for Magnetic Drill Press with 2 pcs Pilot Pins

  • Annular Cutter Kit includes 6 pcs high speed steel annular cutters,2"Cutting Depth,Cutting Diameter(9/16", 11/16'', 13/16'', 15/16'', 1“,1-1/16) and 2pcs pilot pins..
  • OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time..
  • These annular ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • OSCARBIDE annular cutters sets 3/4" Weldon shank with 2 flats,fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders.
  • These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel.
Check Stock

Fielect Silicon Carbide Grinding Wheel Bench Grinding Wheels Green Silicon Carbide 120 Grit for Surface Grinding 1pcs

  • 【Dimension】: 150 x 25 x 32mm / 5.91 x 0.98 x 1.26 inch 120 grit Green silicon carbide grinding wheel..
  • 【High Grade】:Made of Green silicon carbide, with high hardness and the shape reminds well..
  • 【Features】: Maximum cut rate and cool cutting action on hardened or high-speed tool steels.Provides clean, fast, high precision edges and surfaces for non-ferrous tools and metals such as aluminum, copper or titanium .Uniform particles, easy to sand, less wear and tear.It has high brittleness, sharp abrasive grain and good thermal conductivity..
  • 【Wide Application】: Works exceptionally well on tools like drills, mills or disposable tips for burring, grinding, stock removal, blending, rust removal, cleaning and finishing ,Ideal grinding tool for medium and high tensile strength meta l materials..
  • 【Warm Tips】: If you have any issues, inquiries or need assistance, please feel free to contact us directly.Please check the size of the product before buying..
Check Stock

Metal Detector X10 Pro with 9*5\ Coil Waterproof Light Weight Easy to Use Loud Speaker Built-in Rechargeable Battery Perfect for Beginners

  • DETECTION OF 3 TYPES OF METALS: MMD02 provides 3 detection to detect 3 types of different metals, for the 3 different types it will emit the 3 different sounds: a low tone alarm sound for ferrous metals, a medium tone alarm sound for low conductivity non-ferrous metals, and a high-tone alarm sound for high conductivity non-ferrous metals..
  • FANTASTIC DISC BUTTON: By pressing the DISC button of MMD02, you can easily detect certain types of metals: once for ferrous metals, twice to exclude even low conductivity non-ferrous metals, three times to return to normal detection. MMD02 helps to find metal faster, also thanks to the deep detection function. Depending on the depth, different icons will appear on the MMD02 display..
  • FUN FOR EVERYONE: The detection rod of MMD02 can be freely adjusted in length from 61cm to 90cm. Not only is it usable by adults, but it also provides the joy of treasure hunting for kids. The non-slip strip equipped with MMD02 makes it more convenient to carry. The waterproof coil also offers another detection possibility, namely shallow water detection. ? Notice: The detection rod and coil are waterproof, but the detector is not..
  • DETECTION OF 3 TYPES OF METALS: MMD02 provides 3 detection to detect 3 types of different metals, for the ....
Check Stock

Annular Cutters Set 13pcs,2'Cutting Depth,3/4''Weldon Shank,(7/16,1/2,9/16,11/16,5/8,3/4,13/16,7/8,15/16,1,1-1/16)inch Cutting Diameter Annular Cutter,OSCARBIDE HSS Slugger Bits,Mag Drill Bits for Magnetic Drill Press with 2pcs Pilot Pins

  • Annular Cutter Kit 2" cutting depth,includes 11 pcs high speed steel annular cutters,Cutting Diameter(7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16") and 2 pilot pins..
  • OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time..
  • These annular ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • OSCARBIDE annular cutters sets 3/4" Weldon shank with 2 flats,fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders.
  • These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel.
Check Stock