Top Nut And Bolt Thread Checker

(2) Front Suspension Stabilizer Bar Links For Silverado Escalade Tahoe Sierra Yukon K700538 K700432

  • VEHICLE FITMENT Before purchasing, please use fitment checker on top left to confirm proper vehicle fitment. If you have any questions regarding fitment, please reach out to us..
  • SLEEVE/SPACER Plastic OEM-Style Spacer. Refresh your old OEM links with these upgraded replacements..
  • COATING Hardware coated in Dacromet, an industry leading plating for ultimate protection..
  • BUSHINGS High Quality Made In USA Code Red Bushings that will outlast the others on the market today..
  • THREAD LOCK Bolt pre-applied with thread-locking adhesive to prevent premature failure due to nut disengaging..
Check Stock

Nut and Bolt Thread Checker (Inch & Metric) Nut and Bolt Size Gauge- 14 Inch & 12 Metric New Individually Assembled Thread Gauge Suitable for Detecting Fixed Bolts or Threaded Holes in Enclosed Areas

  • [Upgraded Thread Checking Set] Every thread checker is inserted into well cut foam that holds them firmly in place to prevent them from bouncing around in the box, but not so tight that you can easily remove them. Easier to use than connected nut/thread checkers, because you no longer have to carry a whole bunch of gauges to measure individual screws or nuts and can reach any tight spot..
  • [Lifesaver Before Heading to Hardware Store] Just screw the nut or bolt into the screw thread gauge, it takes you a few seconds to check the size. You do not need to drive forth and back to and from the hardware and auto parts stores for check any more. Also, this nut and bolt gauge is especially well suitable for the distinguish between similar inch and metric threads..
  • [Zinc Plated for Inch Size] Includes 14 Inch Size part numbers: 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20..
  • [Black Oxide for Metric Size] Includes 12 Metric Sizes part numbers: M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75. (The thread sizes are permanently stamped onto each 26 gauges, inch in black, metric in white)..
  • [Get Your Stuff Well-Organized] This nuts bolts organizer....
Check Stock

SST Identibolt Bolt and Nut Identifier Gauge

  • "QUICKLY IDENTIFY BOLTS AND NUTS - The SST Identibolt is your One-stop Shop for Verifying the Size and Thread Pitch of All Your Standard Hardware! Never Again Wonder What Size Fastener You Have! Easily Distinguish Between Metric and Inch Thread Sizes, and Quickly Measure Bolt Lengths and Nut Diameters (Unless You'll Miss Making Multiple Trips to the Hardware Store)".
  • ULTIMATE NUT AND BOLT IDENTIFICATION TOOL - The Identibolt Measures Common Imperial SAE and Metric Thread Sizes, Identifying Hardware from #6 to ½" & 4mm to 14mm. Each Size is Accompanied By a Male Thread (for Nuts and Washers), and a Female Thread (for Bolts and Screws)..
  • DURABLE AND BUILT TO LAST - SST's 4"x20" Solid Metal Plate Construction is Hard Anodized for Maximum Thread Strength, With Laser Etched Markings that Will Never Fade or Get Scratched off. Multiple Mounting Holes Give You the Option to Wall Mount it, Secure it in Your Toolbox, or Keep it on Your Workbench!.
  • TWIN RULERS - Inch and Centimeter Rulers on the Bolt Identifier's Edge Help to Quickly Identify the Length of Your Bolt, Screw, Nut, Washer, or Will to Live. Measure Your Hardware Correctly the First Time and Never Make a Second Trip to the Hardware Store Again..
  • UNMATCHED WARRANTY - Masterfully Machined from 6061 A....
Check Stock

Retisee 28 Size 4'' x 20'' Bolt and Nut Identifier Gauge Nut Black Bolt Size and Thread Identifier Thread Pitch Gauge Standard Inch and Centimeter Ruler

  • Easy to Identify: 28 size nut and bolt identification tool ruler is easy to distinguish between metric and inch thread sizes, and can verify the sizes and thread pitches of standard hardware, so you don't need to worry about the size of fasteners you have any more.
  • Metric Thread Sizes: -M4 x 0.7 -M5 x 0.8 -M6 x 1.0 -M7 x 1.0 -M8 x 1.0 -M8 x 1.25 -M10 x 1.0 -M10 x 1.25 -M10 x 1.5 -M12 x 1.25 -M12 x 1.5 -M12 x 1.75 -M14 x 1.5 -M14 x 2.0.
  • Bolt Size and Thread Gauge: bolt and nut identifier gauge measures the bolt length and nut diameter quickly, and identifies hardware from #6 to ½" and 4mm to 14mm.
  • Each size has internal thread for bolts and screws, as well as external thread for nuts and washers.
  • The thread gauge is about 4 x 20 inch, which has multiple mounting holes, so you can choose to put it on the workbench, fix it in the toolbox, or install it on the wall.
  • Double Scale: the bolt and nut identifier has inch and centimeter scales on the edge, so you can identify the length of nuts, washers, bolts and screws quickly.
  • Sturdy and Durable: the bolt identifier is made of ....
Check Stock

M8-1.25 Serrated Flange Nylon Insert Lock Nuts Flanged Locknuts, 304 Stainless Steel 18-8, Bright Finish, 10 PCS

  • Features an internal nylon ring that grips bolt threads better than a standard finished nut.
  • Great for use in applications where the bolt may be subject to vibration.
  • Can also be used as a secondary nut to help lock the main nut in place.
  • The side with the nylon insert should face towards the tip of the bolt, not towards the surface being fastened.
  • Thread Type: Coarse, Thread Class: UNC-2B.
Check Stock

Thread Detective Thread Identifier, Metric and SAE/Inch Combination Set, Jumbo Size

  • Inch Thread Identifiers contain nut and bolt sizes of: 5/8-11, 5/8-18, 3/4-10, 3/4-16, 1-8, 1-12.
  • Metric Thread Identifiers contain nut and bolt sizes of M4x1.5, M14x2.0, M16x1.5, M16x2.0, M20x1.5, M20x2.5, M24x2.0 and M24x3.0.
Check Stock

Lug Nut Remover 6 Pieces Twist Socket Set Extractor Tool Metric Bolt and Lug Nut Extractor Socket Tools

  • 【TIGHT GRIP AND BIT】The plum-shaped internal thread design provides excellent torque and can rotate deep-studded fasteners. The unsmooth concave wall inside is more conducive to the grabbing of the stubborn nut and easy to remove..
  • 【Excellent Torque &Tight Grip】This stripped lug nut removal tool is in plum-shaped internal thread design provides excellent torque.
  • The unsmooth concave wall inside is more conducive to firmly wheel lock and quickly remove the worn lock bolt and rusted, damaged lug nut with less effort.
  • 【Center Punch Bar】A hex top on the extractor makes it easy to use a wrench instead of a ratchet. The extractor may bite together with the broken bolt. After removing it, please use the center punch to knock the bolt off the extractor..
  • 【Multi-Application】17mm, 19mm, 21mm,22mm 27mm and 5 different size nut extractors and an extra metal rod can meet the various needs of the usual needs, they easily pop a removed nut from your extraction sockets, whether it is car repair, remove damage nuts, can provide you with Great convenience..
  • 【BUILT TO LAST】The hardened alloy steel provides this twist socket lug nut remover set with maximum strength and durability.
  • Black oxide finish resists rust and corrosion.
Check Stock

tenluno Thread Checker Nut & Bolt SWTC-44 Bundle Thread Checker Nut and Bolt Checker 44 MaleFemale Thread Identifier Gauges - 23 Inch & 21 Metric Sizes

  • 21 Metric Sizes part number : M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M14x2.0, M16x1.5, M16x2.0, M20x1.5, M20x2.5, M24x2.0, M24x3.0.
  • 23 Inch Sizes part number : 6-32, 6-40, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-12, 9/16-18, 5/8-11, 5/8-18, 3/4-10, 3/4-16, 1-8, 1-12.
  • Each included size has a nut and bolt checker on the same gauge..
  • The size of the thread is engraved on it with a laser, and it is stored forever..
  • Easy to Easy to carry, easy to measure, a good toolcarry, easy to measure, a good tool.
Check Stock

Glvaner M6-1.0mm (100 pcs) Thread Size Stainless Steel Hex Nuts Hexagon Nuts Plain Finish Full Thread

  • Material: 304 stainless steel (A2-70) and no exterior finish, greater strength and corrision resistance performance than regular stianless steel or zinc plated fasteners..
  • Feel free to contact us if you have no idea about what size to choose..
  • Hex nut is most commonly used nut, normally installed to the end of a bolt or other precision screws. You could also find the matched screws with different head types in our shop..
Check Stock

The ROP Shop Spare Tire Wheel Mount Kit Heavy Duty Bracket/Carrier for 6 & 8 Lugs 27021

  • Spare Tire Wheel Mount Kit, Heavy Duty Bracket / Carrier for 6 & 8 Lugs, 27021.
  • Specs - Short Nut & Bolt Specs: Length - 1.25", Diameter - 0.5", Thread Type - Course, Long Nut & Bolt Specs: Length - 4", Diameter - 0.30", Thread....
  • Includes - Brackets, (2) Short Bolts, (4) Long Bolts, (2) Nuts for Short Bolts, (4) Nuts for Long Bolts, (4) Washers for Long Bolts.
Check Stock

Prime-Line 9118861 K-Lock Nuts With External Tooth Washer, 1/4 inch-20, Zinc Plated Steel

  • Hex nut with a built in free spinning external tooth lock washer.
  • Teeth on lock washer help to lock nut into place.
  • Screws onto a bolt, cap screw or threaded rod of the same thread size.
  • Thread Type: Coarse, Thread Class: UNC-2B.
Check Stock

The ROP Shop Spare Tire Wheel Carrier Kit with Hardware Heavy Duty for Many 6 & 8 Lug Trailers

  • Spare Tire Wheel Carrier Kit with Hardware, Heavy Duty for Many 6 & 8 lug Trailers.
  • Specs - Short Nut & Bolt Specs: Length - 1.25", Diameter - 0.5", Thread Type - Course, Long Nut & Bolt Specs: Length - 4", Diameter - 0.30", Thread....
  • Includes - Brackets, (2) Short Bolts, (4) Long Bolts, (2) Nuts for Short Bolts, (4) Nuts for Long Bolts, (4) Washers for Long Bolts.
  • Will not fit all 6 & 8 lug rims. Refer to dimensions before purchasing..
Check Stock