Top Nut Thread Rod

6 Pieces 8/32 Inch M4 12 Inch Threaded Rod with Hex Nuts Set Includes 6 Pcs M4 x 300 mm 304 Stainless Steel Fully Threads Studs Rods and 6 Pcs Thread Hex Nuts for Beaded Garden Stake Rods

  • What You Will Get: the package comes with 6 pieces of 8/32 inch M4 12 inch threaded rods and 6 pieces of M4 hex nuts, 12 pieces or 6 set in total, nice combinations for you to make 6 pieces of fairy garden stakes, as well as other DIY crafts.
  • Detailed Size: threaded studs: thread diameter is M4, and measures approx. 300 mm/ 12 inch in fully length.
  • Hex nut: the coarse thread diameter is M4, pitch: 0.7 mm/ 0.03 inches, flat across width: 7 mm/ 0.28 inch and about 2.8 mm/ 0.11 inch high.
  • Threaded Rods Studs: the threaded steel rod is made of quality 304 stainless steel material, sturdy, and resistant to rust or corrosion, with strong construction, hard to deform or break, which can be applied for a long time, and ideal accessories for assembly fastening, just screw into the threaded nut or threaded hole.
  • Hex Nut: the hex nut can be screwed to this threaded rod well, not easy to slip off, besides, it is also an ideal accessory for fasteners, it is also essential in daily life, just need to screw it to the thread metal rods, bolts and other tools of the same size are fine.
Check Stock

Aopin Scrapbook Photo Albums Screw Post Fit for 0.2inch 5mm Hole Dia Female M4x20mm Butt Screw for Binding Leather Saddles Purses Belt Repair Carbon Steel Nickel Plating Silver 20 Sets

  • Applicable Hole Dia: 0.2inch(5mm), Head Dia: 9.5mm, Thread Specification: M4.
  • Male Thread 8mm, Female Thread 20mm, Drive System: Cross, Slot, Head Type: Round Washer..
  • It is the ideal choice for thin albums, decorative bags, belts, leather collars, sandals, boots, leather bags, helmets, etc. Suitable for all kinds of art and leather crafts as well as DIY clothing making. also used for fastener connection of beds, tables, chairs and other furniture..
  • Use a drill or puncher within 0.5mm larger than the diameter of the female rod to open the hole, put the screw and nut on both sides of the locked object, then use cross screwdriver to lock it..
  • Anti-skid tooth design, precision mechanical thread, carbon steel nickel plating, high hardness, corrosion resistance, environmental and non-toxic..
  • The thickness of the locked object must be less than 95% of the total length of the screw and nut rod, otherwise it will not be tightened..
Check Stock

55 Pack Miaozhun .223/5.56.300 Blackout Wool Star Chamber Cleaning Pads with Rod Fitting Adapter

  • These pads are designed to clean the .223Cal/5.56mm/.300blk star chamber,the locking lugs recess on the barrel extension (bolt locking area) and the face of the chamber..
  • Comes with a male adapter(including a nut to keep the pad on the rod adapter), which can be threaded onto any standard 8-32 gun cleaning rod..
  • How to use: thread a star pad onto the cleaning rod adapter,use the nut to keep the pad tight fit on the rod adapter and insert into the chamber. The pad is cut to fit the locking lugs of the .223/5.56/.300 blk star chamber. You can then twist the rod/pad clockwise to wipe behind the lugs..
  • It's better to apply some oil/solvent to soften the gunk/carbon on the chamber, then use the pads to clean,the pads absorb and holds cleaning solvent well..
  • Made of high density compressed wool felt,pretty stiff. Much easier and efficient to cleaning the star chamber than using cleaning patches..
Check Stock

26 Pack 8/32 Inch Threaded Rods with Hex Nuts M4 12 Inch 304 Stainless Steel Fully Rod Threaded, 13 Pcs M4 300mm Right Hand Threads, 13 Pcs Hex Nuts for Hangers, U-Bolts and Beaded Garden Stake Rods

  • 【THREADED RODS PARAMETERS】Thread Diameter M4: 2.8mm/0.11 ''.
  • 【MATERIAL】304 stainless steel material, corrosion resistance, high temperature resistance, rust resistance and good processing performance.
  • 【FULL THREAD & HEX NUT】For assembly and fastening, threaded rod is a fastener reinforced in threaded nut or threaded hole, right-hand threaded rod stud. Hexagonal nuts are an ideal replacement for industrial and construction fasteners, Simply screw on to a bolt of the same thread size, quick and easy..
  • 【APPLICABLE SCENARIOS】Perfect for auto parts, standoffs, bolts and more metal items that need to be fastened.
  • 13 Pcs full threaded rods, 13 Pcs full threaded hex nuts, 26 Pcs in total, perfect for garden stakes decorative beaded garden stakes etc for outdoor decoration..
  • 【PACKAGE LIST】13Pcs M4×300mm threaded rods, 13 Pcs M4 Stainless Steel Fully Threaded Hex Nuts, which can be cut, heated, drilled and used in multiple dimensions..
Check Stock

MroMax M6 Binding Screws M6 x 45mm Stainless Steel Binding Screws and Rivet Socket Cap Connecting for Binding Baby Bed Furniture DIY Leather Scrapbook and Photo Albums 5Pcs

  • 【Dimension】Screw Thread Specification: M6 x 45mm.
  • 【Good Quality】-Made of quality stainless steel material,sturdy and anti-rust, easy to bind, install and remove, can use repeatedly, good tightness..
  • 【Easy to Use】Easily applied with standard screwdriver. Threaded post lets you open and re-attach piece where needed..
  • 【Instructions】Make a hole larger than 0.5mm than the diameter of the nut rod, put screws and nuts on both sides of the locked object, and select the appropriate tool to lock it..
  • 【Wide Application】Especially suit for leather handicrafts decoration, bookbinding, document, book, album, DIY crafts, etc..
Check Stock

uxcell 5 PCS M3 3.0xL15mm Lever Steering Linkage Tie Rod End Ball Head End for RC Helicopter

  • FEATURES: Center Hole Diameter: 3.0mm/0.12 inch, Bottom Hole Diameter: 2.8mm/0.11 inch, Total Length : 15mm/0.59 inch, Fit Rod Thread: M3.
  • SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
  • ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
  • PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
  • PACKAGE CONTENT: 5 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut).
Check Stock

uxcell 10 PCS M3 3.0xL15mm Lever Steering Linkage Tie Rod End Ball Head End for RC Helicopter

  • FEATURES: Center Hole Diameter: 3.0mm/0.12 inch, Bottom Hole Diameter: 2.8mm/0.11 inch, Total Length : 15mm/0.59 inch, Fit Rod Thread: M3.
  • SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
  • ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
  • PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
  • PACKAGE CONTENT: 10 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut).
Check Stock

uxcell 10 PCS M2 2.0xL19mm Lever Steering Linkage Tie Rod End Ball Head End for RC Helicopter

  • FEATURES: Center Hole Diameter: 2.0mm/0.08 inch, Bottom Hole Diameter: 1.65mm/0.065 inch, Total Length : 19mm/0.75 inch, Fit Rod Thread: M2.
  • SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
  • ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
  • PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
  • PACKAGE CONTENT: 10 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut).
Check Stock

MroMax M6 Binding Screws M6 x 50mm Carbon Steel Binding Screws and Rivet Socket Cap Connecting for Binding Baby Bed Furniture DIY Leather Scrapbook and Photo Albums 10Pcs

  • 【Dimension】Screw Thread Specification: M6 x 50mm.
  • 【Good Quality】Made of quality carbon steel material,spraying treatment,sturdy and anti-rust, easy to bind, install and remove, can use repeatedly, good tightness..
  • 【Easy to Use】Easily applied with standard screwdriver. Threaded post lets you open and re-attach piece where needed..
  • 【Instructions】Make a hole larger than 0.5mm than the diameter of the nut rod, put screws and nuts on both sides of the locked object, and select the appropriate tool to lock it..
  • 【Wide Application】Especially suit for leather handicrafts decoration, bookbinding, document, book, album, DIY crafts, etc..
Check Stock

TPOHH #6-32 Stainless Steel 18-8 (A2) Serrated Flange Hex Lock Nuts, 24 PCS, DIN6923-6-32

  • Flange operates like a washer to distribute load.
  • Screws onto a bolt, cap screw or threaded rod of the same thread size.
Check Stock

MroMax M6 Binding Screws M6 x 45mm Zinc Plated Carbon Steel Binding Screws and Rivet Socket Cap Connecting for Binding Baby Bed Furniture DIY Leather Scrapbook and Photo Albums 10Pcs

  • 【Dimension】Screw Thread Specification: M6 x 45mm.
  • 【Good Quality】-Made of quality carbon steel material, zinc plated surface, sturdy and anti-rust, easy to bind, install and remove, can use repeatedly, good tightness..
  • 【Easy to Use】Easily applied with standard screwdriver. Threaded post lets you open and re-attach piece where needed..
  • 【Instructions】Make a hole larger than 0.5mm than the diameter of the nut rod, put screws and nuts on both sides of the locked object, and select the appropriate tool to lock it..
  • 【Wide Application】Especially suit for leather handicrafts decoration, bookbinding, document, book, album, DIY crafts, etc..
Check Stock

MroMax M6 Binding Screws M6 x 20mm Zinc Plated Carbon Steel Binding Screws and Rivet Socket Cap Connecting for Binding Baby Bed Furniture DIY Leather Scrapbook and Photo Albums 10Pcs

  • 【Dimension】Screw Thread Specification: M6 x 20mm.
  • 【Good Quality】-Made of quality carbon steel material, zinc plated surface, sturdy and anti-rust, easy to bind, install and remove, can use repeatedly, good tightness..
  • 【Easy to Use】Easily applied with standard screwdriver. Threaded post lets you open and re-attach piece where needed..
  • 【Instructions】Make a hole larger than 0.5mm than the diameter of the nut rod, put screws and nuts on both sides of the locked object, and select the appropriate tool to lock it..
  • 【Wide Application】Especially suit for leather handicrafts decoration, bookbinding, document, book, album, DIY crafts, etc..
Check Stock