Top Oil Cooler Fitting

15 ROW AN10 Thermostat Adaptor Engine Transmission Oil Cooler Kit + Oil Filter Adapter Hose Kit

  • Every cooler is pressure checked to 175 psi. Our periodic samples are burst tested to 350 psi..
  • Comes with 2 Oil Lines（Lengths: 1.4M 、1.6M).
  • 10-AN Male Fitting and 0.875” x 12.125” Bolt Patternn.
  • Thread pitch on this center bolt is 3/4x16UNF and M20x1.5 so fitting most of japanese car..
Check Stock

Robinair (15501) VacuMaster Economy Vacuum Pump - 2-Stage, 118 liters/minute

  • Robinair's VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service.
  • featuring a 2-stage rotary vane design, 7.5 ounce oil capacity, and non-skid feet.
  • 118 liters/minute (5 CFM) free air displacement.
  • 1/3 HP, 220V/50 Hz thermally protected motor for international use.
  • Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life.
  • 1/4 inch MFL & 1/2 inch ACME inlet fittings, 3/8 inch FFL x 1/2 inch Acme adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining.
Check Stock

Robinair (15310) VacuMaster Single Stage Vacuum Pump - Single-Stage, 3 CFM

  • Robinair's VacuMaster Single-Stage Vacuum Pump is designed for air conditioning and refrigeration service.
  • featuring a single stage rotary vane design, 8.5 ounce oil capacity, and non-skid feet.
  • 1/4 HP, 110V/60Hz thermally protected motor.
  • Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life.
  • 1/4 inch flare and 1/2 inch ACME inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.
Check Stock

Robinair (15115) VacuMaster Single Stage Vacuum Pump - Single-Stage, 1.5 CFM

  • Robinair's VacuMaster Single-Stage Vacuum Pump is designed for air conditioning and refrigeration service.
  • featuring a single stage rotary vane design, 10 ounce oil capacity, and non-skid feet.
  • Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life.
  • 1/4 inch flare and 1/2 inch ACME inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.
Check Stock

20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black

  • ▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
  • ▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
  • ▶Length: 20 Feet. Inner Diameter: 5/16" (8.71mm). Outside Diameter: 0.56inch (14.22mm). Please measure before purchase!.
  • ▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • ▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..
Check Stock

How to build a HUGE STEEL COCK: The BEST and MOST COMPLETE ENGLISH GUIDE.

  • Robinair's VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service.
  • featuring a 2-stage rotary vane design, 7.5 ounce oil capacity, and non-skid feet.
  • 1/3 HP, 115V/60 Hz thermally protected motor.
  • Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life.
  • 1/4 inch MFL & 3/8 inch ACME inlet fittings, 3/8 inch FFL x 1/2 inch Acme adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining.
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

Robinair 16301 Low Side Tank Adapter - 1/2 Acme Female X Low Side R-134A Male Coupler, Gold

  • Robinair's VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service.
  • featuring a 2-stage rotary vane design, 7.5 ounce oil capacity, and non-skid feet.
  • 1/3 HP, 115V/60 Hz thermally protected motor.
  • Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life.
  • 1/4 inch MFL & 3/8 inch ACME inlet fittings, 3/8 inch FFL x 1/2 inch Acme adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining.
Check Stock

Engine Oil Cooler And Filter Housing Adapter Kit EONLION Sensor Kit Replacement Compatible With 2014-2017 Chrysler 200/300 for Dodge Journey Jeep Wrangler Ram 3.6L Aluminium Silver 68105583AF

  • This is the most up-to-date version of the Genuine Ford OEM Engine Oil Cooler. Like ALL OEM Oil cooler this oil cooler comes with OEM gaskets & the oil cooler screen. All of our coolers do have the updated extra cooling layer..
  • If your EOT & ECT have more than a 20-25 degree variation, your oil cooler is on its way out. Replace it before it becomes an issues. If you replace your defective or failing oil cooler with anything other than the OEM Updated Oil Cooler, you are asking for trouble down the road..
  • This is a new Ford factory oil cooler built by International.
  • Compatible with all 2003-2007 Ford 6.0L Powerstroke diesel trucks.
Check Stock

6.0L Powerstroke Oil Cooler Flush Kit,Blue Anodize Adapter Flush Adapter for Ford 2003 2004 2005 2006 2007 2008 2009 2010 Diesel

  • Made of by high quality aluminum and Brass,prevent high oil temperature result in costly fuel systems and engine failure.Instead of spending a high price to replace the 6.0-liter oil cooler, it is more appropriate to spend a little free time to clean it. And our products can be used repeatedly..
  • With our 6.0L Power Stroke Oil Cooler Flush Kit, the oil cooler can be backflushed in less than an hour. By directing the water flow in the opposite direction of normal travel, contaminants are removed and, in most cases, the cooler is restored to new effectiveness..
  • No need to remove the plant cooling manifold. Coolant enters the cooler from the oil cooler, and when disturbed, the quick connection hose between the oil cooler and the cooler will usually start to leak, resulting in rewinding. Our device will not interfere with the original connection..
  • It is advisable to regularly monitor the Delta T (difference between oil temperature and coolant temperature) while operating the engine under load. If the temperature difference exceeds specification we recommend performing an oil cooler flush. Careful attention to this detail can prevent thousands of dollars of engine and fuel system damage. In the case of a cooling system that has experienced extreme neglec....
Check Stock

Derale 13950 Atomic-Cool Remote Cooler , Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep oil temperature low, help to improve the lubricating effect of engine oil, prevent parts damage ,or even seizure of the engine.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 30Row oil cooler,oil capacity:0.74L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • Package Include:1pc 30row engine oil cooler.2pcs 10an female to 8an male fittings,2pcs 10an female to 6an male fittings.Can be used to connect 8AN / 6AN braided fuel line hose ends..
Check Stock

Transmission Torque Converter Oil Cooler Compatible with 2003-2009 Auto Heat Exchanger Base for Dodge Ram 2500 3500 Cummins Diesel 5.9L 6.7L Replaces OEM 68004317AA 5086946AA 5086946AB 4930582

  • TORQUE CONVERTER OIL COOLER - New replacement torque converter oil cooler for Cummins transmission torque converter cooler compatibility with....
  • HIGHLY PERFORMANCE - Replace a new oil cooler transmission can reduce the oil temperature, reduces oil consumption. Customers can find the....
  • FUNCTIONS - The transmission oil cooler is an essential component of every vehicle, helps the transmission stay cool, even when working harder than....
  • SYMPTOMS OF A FAILED TRANSMISSION OIL COOLER - The proper functioning of it is necessary for a healthy vehicle, and if it is worn, you could be in big....
  • KINDLY REMINDER - Kindly please refer to part number and fitment chart carefully before place order to avoid buying wrong. High quality OEM....
Check Stock