Top Oil Pressure Switch With Integral Display

Air Venturi Air Gun Hand Pump (‎Hand Pump)

  • Pumps to 4, 500 psi/310 bar (always use the correct pressure rating for your gun).
  • Flexible 21" micro-bore hose (inside a spiral steel cage).
  • Integrated moisture catch on output end of hose.
  • Integral manometer - oil-filled air pressure gauge.
  • Includes test plug, accessory pack with spanner wrench and 2 rebuild kits.
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

Oil Pressure Sensor Engine Oil Pressure Switch Sensor, 0 to 10 Bars 1/8 NPT Oil Pressure Sensor Gauge Sender for Diesel Generator

  • EASY INSTALLATION: The engine oil pressure switch sender is compact design for easy portability and storage, easy to install and use.
  • DURABLE: The engine oil pressure switch sensor adopts with top grade aluminium alloy, resistant to high temperature from -25 to 100 degree, can increase service life.
  • PRESSURE RESISTANCE: The oil pressure gauge sensor is resistant to high pressure up to 10 bar, can meet your use.
  • PRACTICAL: The engine oil pressure sensor has 1/8" NPT male thread for connecting to male threaded pipe fittings, very practical in work and life.
  • WIDELY APPLICATIONS: The oil pressure sensor NPT-1/8 has widely applications, which is applicable to water, oil, and gas(no freezing).
Check Stock

7 Color Oil Pressure Gauge 0-140 PSI Oil Press Gauge Meter 52mm 2-1/16" LED Backlight Black Oil Pressure Meter with Oil Pressure Sensor

  • 【】Our oil pressure gauge can quickly and accurately detect and display the oil pressure of your car or truck's engine through stepping motor and electronic sensor. So as to prevent major faults such as cylinder pulling，shaft burning due to lack of oil and so on..
  • 【 】7 solid color oil gauge allow you to match your dashboard lights or add a custom style to the Interior of your vehicle.The button on the lens can switch the color of light you want,this feature be helpful to improve visibility when driving at night..
  • 【 】Oil pressure readings from 0 to 140 PSI - 2-1/16" (52mm) black dial gauge,tinted lens & Illuminated red needle will add a sleek new look look.When going into a full blackout will creating a unique and customized stealth-like appearance..
  • 【 】1 Oil press gauge,1 Oil Press Sensor,1 Power Harness,1 instruction paper,1 U Holder,some hardwares.
  • 【 】The contact point of this oil gage is made of high quality copper material, which is easier to conduct electricity, not easy to age, and extends the service life..
Check Stock

WWDOLL Kids KN95 Face Mask 25 Pack, 5-Layers Breathable KN95 Masks for Children, Black

  • This EMF Outlet Oil Mist Filter is suitable for all Edwards Rotary Vane pumps up to E2M18..
  • This EMF10 EMF-10 exhaust filter assembly is supplied with NW25 clamp, centering ring, O-Ring, NW25 to 3/4 BSP adapter, 1 oil element filter and 1 odor element..
  • The benefits of the oil mist filter includes: protection from oil mist emissions as required by COSHH and health and safety regulations. If the oil element becomes blocked, an integral pressure relief valve opens..
  • This filter is very efficient at 99.999% DOP test and is also azide proof..
  • The white bottom half of the body is semi-transparent, allowing the oil level to be monitored. Replacement oil elements and odor elements are available on this website..
Check Stock

BY-J Car HUD Display, OBD2 Gauge Display+GPS Speedometer for Car Diagnostic Tool, OBD Fault Code Elimination Safe Driving Overspeed Fault Alarm, Troubleshooting Heads up Display for All Vehicles

  • ...d in the United States in 2004 and in other regions after 2008, while GPS mode is suitable for all vehicles..
  • [Multiple Display Interface] Multi-functional cars digital Speedometer can switch 8 kinds of interfaces, can separately present a simple interface of speed interface, OBD interface，6-grid interface, scroll pressure interface, acceleration test interface, brake test interface, or present full function interface..
  • [Function for OBD2 Mode] Working voltage: 11V~18VDC (12vdc/200mA). Function including speed, RPM, water temperature, voltage, fuel consumption, clock, single travel distance, single travel time, oil temperature, turbine pressure, acceleration test, brake test, overspeed alarm, engine failure alarm, elimination of fault code, water temperature alarm , speed alarm, voltage alarm, mile switch, fatigue driving reminder, automatic and manual brightness adjustment..
  • [Two installations] This installation methods of the digital GPS speedometer are simple and diverse. You can place it directly in front of the car's center console, or use the tape that comes with to tie it to the car. The smart gauge connects to the vehicle via OBD cable, plug and play..
Check Stock

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • ...alls vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
  • 3/8’’ Drive × 7/8’’ ×1-1/4’’ low profile design for use in tight spaces..
  • This set includes 1-1/16 and 1 in. oil Pressure sending unit socket, 3/8 in. drive, 1-3/16 in. Oil pressure sending unit socket, 1/2 in. drive, 1-1/16 in. thermal sensor switch socket, 1/2 in. drive. 7/8 in. heated oxygen sensor socket, 1/2 in. drive, 7/8 in. low profile offset oxygen sensor socket, 3/8 in. drive, 7/8 in. oxygen sensor socket, 3/8 in. drive, 7/8 in. universal vacuum PVS, TVS....
Check Stock

Mil-Spec Rear Switch-Socket Assembly for Scoutlight Weaponlights Includes ST07 Tape Switch Black

  • The UE07 provides reliable remote activation for any Scout Light WeaponLight.
  • The switch, cable, and connector are an integral unit that plugs into....
  • Provides remote momentary-on WeaponLight activation.
  • 7" Pressure-activated switch attaches to firearm via adhesive-backed Velcro pad.
  • Fits all SureFire M Series Scoutlight WeaponLights.
Check Stock

12677836 Oil Pressure Sensor Switch D1846A for Chevrolet/GM Equipment 12616646,12573107, 12562230,12614969, 12569323, 12562230, 12556117, 12559780,8125622300, 8125731070, 8126166460, 1S6713, PS308

  • 【COMPATIBLE VEHICLES NOTE】★★★Buy it with your confidence! ★★please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase our This Engine Oil Pressure Sensor Switch..
  • 【QUALITY & FEATURES】★★In manufacturing, we utilize a laser etching system to calibrate thick film printed circuits. This provides for high accuracy reading of actual oil pressure in vehicle's engine.★★In construction, we utilize high temperature, polyimide film diaphragms. These provide for exceptional cycle durability & resistance to rupture & oil leakage. ★★★ a robust design with high grade materials to meet the stringent demands of today's service professional to insure it lasts longer..
  • 【EASY INSTALLATION】★★★All engine oil pressure sensor units are tested using automated equipment that activates the switch, checks for leaks & stresses the part to ensure specification compliance, even under the most demanding operating conditions. simple structure, easy to install, plug and play, very convenient.★★★ Only 10 mins less for installation.Save your time and money, check youtube video if you have installation problem..
  • 【REPLACES PART & MODEL】 Replaces# 1267....
Check Stock

Qiilu Transmission Oil Pressure Switch 28600-RCL-004 Car Auto Trans Oil Pressure Switch Replacement Fit for Honda Accord for CR-V

  • Scope of Application --- The gearbox oil pressure switch Fits for ACURA RSX 2002-2006, Fits for ACURA TSX 2004-2008, Fits for HONDA ACCORD 2003-2007,....
  • Reference OEM --- This gearbox oil pressure switch replaces the OEM number for reference: 28600-RCL-004. Comply with strict quality control standards.
  • High-quality Materials --- The gearbox hydraulic switch is designed and made of high-quality aluminum and ABS, which is stable and durable, and is a....
  • Easy to Install --- The gearbox oil pressure switch is professionally designed, simple to install, and does not require complicated tools. Can replace....
  • Quality Assurance --- As a professional seller, we provide high quality products and considerate services. Every product must go through strict....
Check Stock

XTOBD Car Head Display C3 Head Up Display Navigation 5"HD Screen HUD OBD2+GPS Dual System HUD Support Map Navigation

  • OBD mode function: vehicle speed, water temperature, voltage, fuel consumption, speed, single mileage, total mileage, cumulative driving time, driving direction, number of star searches, altitude, system time, intake pressure, oil temperature, air-fuel ratio, turbine pressure, intake pressure, acceleration test, brake test, clear fault codes, read data flow.
  • GPS mode function: vehicle speed driving time satellite time altitude satellite number driving direction single mileage voltage acceleration test braking test.
  • Features: stereoscopic imaging, using translucent semi reflective lens to suspend the stereoscopic display of information in the air, zero ghosting, and clear display in the daytime.
  • System selection:Please switch to GPS system when OBD mode is not available OBD2 mode working voltage: 5V~18VDC (12vdc/200mA), when voltage is higher than 24v, please use a USB cable for GPS mode..
  • HUD short for Head Up Display,The main function is to display the car dashboard information (e.g.speed,RPM,water temperature,voltage,trip distance etc ),and keep the driver eyes always on road to avoid the dangerous of lowering down head to read the dashboard..
Check Stock

ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8in), 27mm, 29mm – All Vehicle O2 Removal and Installation

  • NO MORE HASSLE: The ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8” Inches), 27mm, 29mm – All Vehicle O2 Removal and Installation is for inspection, removal, and installation of hard-to-reach oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches, and brake light switches.
  • Each socket is permanently etched with size marking for your convenience.
  • MATCHES YOUR CAR: Universal fit for Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Open (GM), and Volkswagen.
  • Sizes include 22mm (7/8”), 27mm, and 29mm.
  • For both heated and non-heated oxygen sensors.
  • Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions.
  • Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) for extra strength and longevity.
  • Tools have a light coating of oil to protect them from rusting.
  • EASY STORAGE: Heavy-duty 9” x 2.25” x 8” inch (22.9cm x 5.7cm x 20.3cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes (1) 29mm pressure/vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 6pt socket + (1) 22mm (7/8 inch) v....
Check Stock