Top Oil Pressure Switch With Nema Ratings

Star JHU07 3/4 HP Cast Iron Convertible Jet Pump for Shallow or Deep Wells, Made in the USA using a Majority of U.S. Content

  • Cast iron 3/4 HP convertible well jet pump made in the USA using a Majority of US Content – includes pump, motor, pressure regulator body, flow control screw and pressure switch (order ejector and pressure gauge separately).
  • Designed for use with single pipe shallow wells with suction lifts from 0' to 25 feet AND dual pipe deep wells with suction lifts up to 110 feet (See capacity charts for specific performance and ejector models).
  • 115/230 dual voltage continuous duty uni-frame 56 motor (NEMA J adaptable) with capacitor start provides maximum starting torque and thermal overload protects against overheating.
  • Sturdy cast iron construction includes ejector for easy serviceability, pressure switch, special priming port for easy priming, carbon/ceramic mechanical shaft seal, and easy access drain plug for winterizing.
  • 100% factory tested and covered by Star Water Systems 2-year limited warranty.
Check Stock

Oil Pressure Sensor Engine Oil Pressure Switch Sensor, 0 to 10 Bars 1/8 NPT Oil Pressure Sensor Gauge Sender for Diesel Generator

  • EASY INSTALLATION: The engine oil pressure switch sender is compact design for easy portability and storage, easy to install and use.
  • DURABLE: The engine oil pressure switch sensor adopts with top grade aluminium alloy, resistant to high temperature from -25 to 100 degree, can increase service life.
  • PRESSURE RESISTANCE: The oil pressure gauge sensor is resistant to high pressure up to 10 bar, can meet your use.
  • PRACTICAL: The engine oil pressure sensor has 1/8" NPT male thread for connecting to male threaded pipe fittings, very practical in work and life.
  • WIDELY APPLICATIONS: The oil pressure sensor NPT-1/8 has widely applications, which is applicable to water, oil, and gas(no freezing).
Check Stock

Goulds Pump J5S Shallow Well Jet Pump, 115/230 volt, 1/2 hp

  • Pumps are manufacturer tested and may contain water inside from such testing,.
  • See all sketch images for more details, NEMA standard, 60 Hz, 1/2 HP, 115/230 V capacitor start, single phase, 3500 RPM.
  • Built-in overload with automatic reset, stainless steel shaft, pressure regulator included..
  • Rotation: Clockwise when viewed from motor end, UL778 listed.
  • Pipe connections: 1. 25" Npt suction and 1" Npt discharge, pressure switch: as4 preset (30-50 PSI)..
Check Stock

Square D by Schneider Electric 9013FSG2J20 Air-Pump Pressure Switch, NEMA 1, 20-40 psi Pressure Setting, 20-65 psi Cut-Out, 15-30 psi Adjustable Differential

  • Pressure switch with 20-40 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached.
  • Switch works with a 1.5 hp or less pump, has an adjustable differential range of 15-30 psi, and has a cut-out range of 20-65 psi.
  • NEMA 1 enclosure has a 1/4" NPSF internal fluid connection.
Check Stock

Goulds J5SH Residential Shallow Well Jet Pump 0.50 HP

  • See all sketch images for more details, NEMA standard.
  • 60 Hz, 1/2 HP, 115/230 V capacitor start, Single phase, 3500 RPM.
  • Built-in overload with automatic reset, Stainless steel shaft, Pressure regulator included..
  • Rotation: clockwise when viewed from motor end, UL778 listed.
  • Pipe connections: 1.25" NPT suction and 1" NPT discharge, Pressure switch: AS4 preset (30-50 PSI)..
  • Note : All Pumps, Are Tested By The Manufacture, Prior To Shipping. At Times You Will Encounter A Smalll Amount Of Water Residue Left Over From The Test..
Check Stock

Pass & Seymour H703PDBCCV4 15A Single Pole Decorative Switch

  • Convenient operation -- combines ON/OFF Decorator switch with separate slider for dimming control..
  • Constant memory returns lights to previous level after a power failure..
  • Sleek, ergonomic P&S Decorator style matches other Decorator devices..
  • Higher ratings. Single pole and 3-way operation. Works with standard 3-way switches and wiring..
  • Screw-pressure-plate back wire terminals save time, space and money..
Check Stock

Goulds 7GS10 Submersible Water Well Pump End Only, 7 GPM, 1 HP Required, 17 Stages

  • See all sketch images for more details, NEMA standard.
  • 60 Hz, 1/2 HP, 115/230 V capacitor start, Single phase, 3500 RPM.
  • Built-in overload with automatic reset, Stainless steel shaft, Pressure regulator included..
  • Rotation: clockwise when viewed from motor end, UL778 listed.
  • Pipe connections: 1.25" NPT suction and 1" NPT discharge, Pressure switch: AS4 preset (30-50 PSI)..
  • Note : All Pumps, Are Tested By The Manufacture, Prior To Shipping. At Times You Will Encounter A Smalll Amount Of Water Residue Left Over From The Test..
Check Stock

Ingersoll Rand 23474653 Pressure Switch for Single Phase Compressor

  • Ingersoll Rand OEM pressure switch for 2 stage reciprocating compressors.
Check Stock

Goulds 1K310 Pump Motor Adapter for J55,J7S,J10S,J15S Jet Pumps

  • Pumps are manufacturer tested and may contain water inside from such testing,.
  • See all sketch images for more details, NEMA standard, 60 Hz, 1/2 HP, 115/230 V capacitor start, single phase, 3500 RPM.
  • Built-in overload with automatic reset, stainless steel shaft, pressure regulator included..
  • Rotation: Clockwise when viewed from motor end, UL778 listed.
  • Pipe connections: 1. 25" Npt suction and 1" Npt discharge, pressure switch: as4 preset (30-50 PSI)..
Check Stock

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • ...alls vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
  • 3/8’’ Drive × 7/8’’ ×1-1/4’’ low profile design for use in tight spaces..
  • This set includes 1-1/16 and 1 in. oil Pressure sending unit socket, 3/8 in. drive, 1-3/16 in. Oil pressure sending unit socket, 1/2 in. drive, 1-1/16 in. thermal sensor switch socket, 1/2 in. drive. 7/8 in. heated oxygen sensor socket, 1/2 in. drive, 7/8 in. low profile offset oxygen sensor socket, 3/8 in. drive, 7/8 in. oxygen sensor socket, 3/8 in. drive, 7/8 in. universal vacuum PVS, TVS....
Check Stock

12677836 Oil Pressure Sensor Switch D1846A for Chevrolet/GM Equipment 12616646,12573107, 12562230,12614969, 12569323, 12562230, 12556117, 12559780,8125622300, 8125731070, 8126166460, 1S6713, PS308

  • 【COMPATIBLE VEHICLES NOTE】★★★Buy it with your confidence! ★★please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase our This Engine Oil Pressure Sensor Switch..
  • 【QUALITY & FEATURES】★★In manufacturing, we utilize a laser etching system to calibrate thick film printed circuits. This provides for high accuracy reading of actual oil pressure in vehicle's engine.★★In construction, we utilize high temperature, polyimide film diaphragms. These provide for exceptional cycle durability & resistance to rupture & oil leakage. ★★★ a robust design with high grade materials to meet the stringent demands of today's service professional to insure it lasts longer..
  • 【EASY INSTALLATION】★★★All engine oil pressure sensor units are tested using automated equipment that activates the switch, checks for leaks & stresses the part to ensure specification compliance, even under the most demanding operating conditions. simple structure, easy to install, plug and play, very convenient.★★★ Only 10 mins less for installation.Save your time and money, check youtube video if you have installation problem..
  • 【REPLACES PART & MODEL】 Replaces# 1267....
Check Stock

Qiilu Transmission Oil Pressure Switch 28600-RCL-004 Car Auto Trans Oil Pressure Switch Replacement Fit for Honda Accord for CR-V

  • Scope of Application --- The gearbox oil pressure switch Fits for ACURA RSX 2002-2006, Fits for ACURA TSX 2004-2008, Fits for HONDA ACCORD 2003-2007,....
  • Reference OEM --- This gearbox oil pressure switch replaces the OEM number for reference: 28600-RCL-004. Comply with strict quality control standards.
  • High-quality Materials --- The gearbox hydraulic switch is designed and made of high-quality aluminum and ABS, which is stable and durable, and is a....
  • Easy to Install --- The gearbox oil pressure switch is professionally designed, simple to install, and does not require complicated tools. Can replace....
  • Quality Assurance --- As a professional seller, we provide high quality products and considerate services. Every product must go through strict....
Check Stock