Top Oil Pump Bolt Seal

OEM Technologies 90029 Replacement Pressure Washer Pump Kit, 3400 PSI, 2.5 GPM, 3/4\ Shaft, Includes Hardware and Siphon Tube, for Residential and Industrial Gas Powered Machines

  • Extend the life of your pressure washer: Save money by replacing your pump instead of buying a whole new power washer. This easy-to-install kit is great for power washers that can support 3400 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more.
  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Skip the Oil Change: This pump features a maintenance-free crankcase so you never have to change the oil. It is manufactured from fully anodized die-cast aluminum for protection against corrosion.
  • Extended durability: A Thermal Relief Valve (TRV) protects the pump from overheating while in bypass mode. The TRV releases small amounts of hot water and intakes cooler water to prevent overheating and extend the life of the pump.
  • Get the right pump for your machine: this pump is designed for gas-powered pressure washers with horizontal engines. Its SAE bolt patter....
Check Stock

FLUENTPOWER 3/4 HP Utility Pump with Full Stainless Casing, Submersible Sump Water Pump with Float Switch,Max Lift 27 Ft and Max Flow 3300 GPH, 3/4" Garden Hose Adapter and 1"&1.5" MNPT Included

  • 【Float Switch Automatically Control】- The pump is automatically ON/OFF controlled by float switch according to water level. It starts at water level 30~50cm and stop at 10~15cm. It can remove water down to 1 cm by manually control..
  • 【Full Stainless Casing and Long Cable Cord】Solid metal casing is resistant to rust. This pump is only works with clean water that contains small solid less than 5mm. Pump also comes with a long 26.2ft cable cord, which allows pump to go deep enough (23ft) in the water..
  • 【Oil-Filled Seal Structure with Thermal Protection】- Oil-filled seal structure gives pump longer duration, which is much longer than regular mechanical seal. Thermal protector ensures that the pump will not be burned out. Even when the pump trigger thermal overload protector, pump will rework after cooling down..
  • 【3/4 HP Power High Efficiency】- Maximum capacity of transferring water up to 3300 GPH with 1.5″ discharge port and hose horizontally, Maximum delivery height is 28ft vertical, 2200 gallons per hour on at 10ft discharge lift..
  • 【GHT 3/4″, NPT1″ and 1.5″ male tread connectors included】- With 1.5″ discharge port will give pump maximum output flow rate. Multiple hose adapters help you to get pump starte....
Check Stock

Oregon 562407 Economic Combi-Can 5+3 litres Red

  • 2 Spout 3" straight spout with copper nozzle 10"long flexible spout which can be bend easily and orient-able hold the position perfectly. This makes....
  • Metal Black hand pump oil can is made of high quality steel, durable, wear resistant. Epoxy finished surface is rust-proof and easy to clean..
  • 10 oz oiler can is perfect for one handed operation, especially in tight spaces. Easy to store and carry. It’s widely used in lubricating field,....
  • Oil can pump with a heavy-duty precision piston, over-sized handle and easy thumb pump trigger, easy to use. High volume of fluid is delivered with....
  • Pump oil can the new seal structure, increase 35% pressure, increase 25% oil rate, prolong the lifetime to two times..
Check Stock

2400-2800PSI Pressure Washer Replacement Pump, 3/4\ Shaft Horizontal Pressure Pump Replacement Power Washer Pump Universal Pumps for Power Washer

  • ✔[RESTART YOUR PRESSURE WASHER]: Vertical Pressure Washer Pump 7/8" Shaft MAX 3100 PSI / 2.5 GPM / @3400 RPM, refurbish your pressure cleaner by replacing it with a new pump for up to 150 hours. Top performance at 2800-3000 PSI and replacement for most Rear Outlet 180-196cc at 6.5-7hp engine RYOBI, Honda, Briggs and Stratton, Subaru, PowerStroke, Craftsman, Simpson, Homelite and Many other brand..
  • ✔[EXTENDED SERVICE TIME]: High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, We promise the pump get 200 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in by pass mode. ⚠ But will not fit 3/4" shaft engine pressure washer. If you're not sure, please keep intouch with us!.
  • ✔[EASY JOB]: Built-in for simple & quick cold starts to make the startup a breeze. no need to release pressure before starting engine. Easy set up in 5-10 minutes with Key. At the same time, we come with 3 special test matched nozzles(0°/25°/soap) to help you get the best cleaning solution. Please follow the instructions to help your machine renew working quickly..
  • ✔[NO MAINTENANCE ]: Our pressure washer pump already have pre-filled oil and dou....
Check Stock

Leadrise 12V Electric Fuel Pump Universal Inline Fuel Pump Universal Low Pressure Gas Diesel Fuel Pump 2.5-4psi HEP-02A

  • ★【SPECIFICATIONS: 】 Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【Electric Fuel Pump Performance:】 Low Pressure Fuel Pump, build-in check valve design to prevent back flow, light-weight and small size, Using a plunger-type of fuel supply way, suction stronger, oil supply more stable..
  • ★【12 Volt Fuel Pump: 】Upgrade check valve provides optimum traffic, reducing the noise of the pump so we can operate quietly. The Oil Absorption Capacity is Strong Enough to Ensure the Supply of Fuel.
  • ★【Easy to Install:】Universal Electric Fuel Pump 2 bolt fixing, 2 wires design, build-in check valve designed to prevent back flow. It can be used as booster, standby unit or as a completely independent fuel pump installation and mounted anywhere..
  • ★【WIDE APPLICATION:】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

BOYISEN Oil Change Pump Extractor 12v 80W Oil Extractor Pump Diesel Fluid Transfer Scavenge Suction Pump Oil Quick Changer for Car, Boat, Marine, Motorbike, Truck, RV, ATV(Orange)

  • 【Efficient Electric Pump】Oil change pump, a great helper for quick and clean oil changing and transfer, all parameter is verified by multiple test. Diesel Flow Rate: 1.5L/min, Engine Oil Flow Rate(40-60℃): 0.3L/min, Inlet Tube Length: 1.2m/47.2in, Outlet Tube Length: 1.4m/55.1in, Voltage: 12V, maximum current: 7A, maximum power: 80W.
  • 【NOTES】A, This oil transfer pump CAN NOT transfer WATER, GASOLINE, PETROL, FUEL or FLAMMABLE LIQUID. B, Please DO NOT misplace the direction of import and export, positive and negative poles and secure the hose clamps. C, Heat up your engine oil to 104°F-140°F before pumping. D, We tested oil pump before shipping, there might be little oil stain in the pump, kindly understand. E, To make it last longer, it’s recommended to keep a little oil inside when the extractor pump is not in use.
  • 【Premium Quality】The quality of oil change pump extractor varies widely. We are using pure copper for the motor and alligator. Good electrical conductivity, corrosion resistance and rust free, effectively avoid leakage or short circuit.
  • 【What You Get】The diesel change pump come with 2 outlet hose, 2 inlet hose, 4 hose locks and 2 battery clips. The hose clip enable to thoroughly seal the connection and prevent leaking. A....
Check Stock

LUMAX LX-1336 Red Plastic Bucket Pump with Flex Hose and Non-Drip Nozzle. 5-6.5 Gallon (20-25 L) Capacity. Self-Priming, Push-Down Action Pump. Discharge Capacity: 3 Fluid Ounces per Stroke.

  • Push-down action pump that fits 5 gallon pails.
  • Precision buna-n seal that eliminates by-pass.
  • 50 inches flex hose has non-drip nouncezle.
  • 3 fluid ounce per strokeDescriptionThe plastic bucket pump with flex hose and non-drip nozzle is a plastic bucket pump with zinc-plated steel tube for transferring non-corrosive fluids of light to medium viscosity like, engine oil, gear oils, transmission fluid, automotive additives, machine oil, etc. It is a self priming, push-down action pump that fits 5 gallon pails, has a drain-back nozzle that prevents spills and accidents, a precision buna-n seal that eliminates by-pass, a nylon piston for durability, and a zinc plated, corrosion-resistant suction tube. It includes a 50 inches oil-resistant flex hose with non-drip nozzle, has a 1 inches inlet port, and a 1/4 inches outlet port. The discharge capacity is 3 ounce per stroke..
Check Stock

4 Pack of TORQUE Hubcap 3434009 Aluminum Hub Cap for Trailer Axle (Replaces Stemco 343-4009, 3434009) (4 x TR3434009)

  • semi truck trailer wheel hub axle oil cap seal cover hubcap. Replaces stemco hub seal 4009.
  • ?Specifications?[Bolt Circle: 5-1/2] [Bolt Size: 43967] [Number of Bolts: 6].
  • [Overall Depth: 2-11/16] [Inside Depth: 1-15/16] [Flange Inner Diameter: 4-3/8] [Flange Outer Diameter: 6-1/4] [Gasket Part Number: 330-3009].
  • ?Replaces? [Stemco: 343-4009, 3434009] [GMC/Volvo: 921010009] [Spicer-Dana: M10HK124, M10HK182] [Strick: R20148201, R20148227] [Timpte: 2009913] [Trailmobile: 8668].
  • [National: 343-009] [Chicago Rawhide: C43-4009].
Check Stock

High Pressure Oil Pump Master Service Kit with Base Gasket, HPOP Upgraded Full Compatible with 1994-2003 Ford Powerstroke 7.3L Diesel Engine 7.3L F250-F550, E250-E450, Excursion (Pack of 22 Set)

  • ★High Pressure Oil Pump Master Service Kit includes all the components you need to replace all seals and O-rings on your high-pressure oil pump and correctly reinstall the pump..
  • ★Comes with many components you won’t find in other HPOP seal kits on the market today.
  • ★Suitable for 1994-2003 Powerstroke 7.3L Diesel and 1995-2004 Navistar DT466 & T444E.
  • ★Package Include:2- Discharge port O-Rings,1- Rear Port Plug O-Ring,1- Non- Serviceable Port O-Ring,1- IPR Valve O-Ring,1- IPR Nut,1- Fill Plug O-Ring,1- Non-serviceable port long threaded repair plug,1- Set of Repair instructions,2- Diesel High Pressure Oil Pump STC Fittings,1- STC Quick Disconnect Tool,1- High Pressure Oil Pump Mounting Gasket.
  • ★100% satisfaction：If you are not satisfied with our High Pressure Oil Pump Master Service Kit ,please contact us,we will try our best to solve your problem..
Check Stock

JEREPET 2000GPH Pond pump,Submersible Water Pump,high lift waterfall pump,with barrier bag, used as fountain pump outdoor,for Koi Pond Statuary Aquarium 18FT Max Lift 115W

  • Professional pond pump:This 2000 gallon per hour 115W submersible water pump comes with high-efficiency epoxy protected asynchronous motor,oil-free and magnetic-driven ,with 16feet certified cable with US type 3pin plug, 18feet max lift height..
  • Durable seal impeller and shafts: With wear-resistant anti-corrosion ceramic shaft, silicon carbide bearings,longer life and more efficient ,use seal impeller ,high lift and quiet operation (less than 40db)and energy saving.
  • Simple Installtion &Maintenance:With detachable intake screen and pump cover,3 position adjustable outlet direction,with flexible tube size clear outlet adapter,4 suction rubber feet and portable handle..
  • Multiple application: This water pump are ideal used as pond pumps ,founatin pump,waterfall pump ,filter system pump,outdoor ponds submersible fountain pump,KOI circulation/return pump ,hydroponic pump, statuary pump,can be used as a submersible or inline pump.
  • 17.7"Large Pond Pump Barrier Bag Included:Comes with 17.7"x 17.7" mesh bag , help to prevent debris such as leaves from blocking the pump when used as pond pumps submersible outdoor..
Check Stock

ValvoMax Quick Twist Oil Drain Valve – the Fastest, Easiest, Cleanest Way to Change Oil at Home – No Tools, No Mess, No Cleanup – for M12-1.75 - Stainless Drain Hose Attachment

  • CHANGE YOUR OIL AT HOME IN 10 MINUTES OR LESS WITH NO MESS. The fastest, easiest, and cleanest way to change your oil at home with the ValvoMax Quick Twist Oil Drain Valve. Replaces your drain bolt. Find your vehicle using the Amazon Confirmed Fit search tool. Free returns, no oil leaks guaranteed, lifetime warranty, 100% satisfaction, made in USA, veteran owned..
  • THE COMPLETE SOLUTION. Includes Quick Twist valve, steel cap with embedded rubber seal, drain tube assembly, and washer for installation. Eliminate the need for extra tools, no stripped or frozen drain plugs, avoid hot oil burns, and drain oil hot. Prevent spills, eliminate injuries, promote sustainability, controlled sampling, lower cost, reduce time, and more!.
  • PREMIUM BUILD. Features rugged Stainless-Steel construction that’s built to last, wave spring technology allows for FAST oil drain, premium VITON O-rings, safety cap with embedded rubber seal. Nothing comes close to the durability offered. Material you can TRUST! Designed with 3 redundancies in mind to eliminate any chance of leak..
  • NO LEAKS GUARANTEED. The Quick Twist valve has 3 backup mechanisms to p....
Check Stock

RKX 3.0L 2006 + Vacuum pump Re-seal Rebuild kit compatible with Dodge / Mercedes Freightliner Sprinter

  • RKX 3.0 L vacuum pump reseal kit compatible with Dodge / Mercedes Benz Sprinter.
  • Includes all needed gaskets to rebuild the 3.0L pump and stop it from leaking oil. Dodge / Mercedes do not sell this kit as a spare part. They want....
  • Our custom injection molded seals are made from military grade Fluorocarbon (Viton) and designed to hold up under the extreme conditions of your....
  • Resealing your pump is cost effective and easy! Our kits included everything needed to seal your pump and stop it from leaking oil..
  • Fits Freightliner Sprinter 3.0L 2007 - 2017. Part number interchange info: A6462300165 , A 646 230 01 65, A6422300065, A 642 230 00 65.
Check Stock