Top Oil Pump Check Valve

Aquascape Dual Union Check Valve 2.0 for Pond, Waterfall and Water Feature Pumps | 48026

  • The innovative AquascapePRO Dual Union Check Valve 2.0 provides a professional pump and plumbing connection inside skimmer filter systems, as well as Pondless Water Vaults..
  • The heavy-duty, swing-style check valve flapper maximizes water flow through the valve when open, while preventing the backflow of water when the pump is shut off or during a power outage..
  • Union connections on both both sides of the valve make pump and filter maintenance quick and easy without the use of tools..
  • Height extendable for larger filters and pumps. Height extendable for installation taller filters.
  • (2) - 2" MPT x 2" Slip Fitting, (1) - 1.5" FPT x 2" Slip Fitting.
Check Stock

iMeshbean® 4\ Deep Well Submersible Pump with Built-in Control Box, 1/2 HP, 220V, 60 Hz, 25 GPM, 150 Feet Head, 33' / 10M Long Electric Cord, Stainless Steel M#03

  • 150 Feet MAX Head, 25 GPM Max, Stainless Steel Deep Well Submersible Pump, 1/2HP 220V.
  • 4" deep well submersible pump, fits in the 4" well casing..
  • 33' long electric cord comes with this submersible deep well pump.(the Plug and the Power Cord are Cut,you can extend or shorten the power cord depending on your needs.).
  • Built in control box. This pump DOES NOT require an external control box!.
  • ★【 Built-in Controlbox & Check Valve】This item is with a built-in control box, it is for thermal protection, short-cut protection and overload protection；★【NOTICE】This pump has a built in check valve. However installing additional check valve is recommended.
Check Stock

hygger Mini Aquarium Air Pump Kit Small Fish Tank Air Pump 1W for 1-20 Gallon Fish Bowl with Air Tube Air Bubbler Stone Check Valve (1W)

  • Nice Bang for Your Buck — Hygger provides a ready-to-go air pump kit for fish enthusiasts including HG-949 Air pump, 3.6 ft long air tube, 0.9 inch air stone, check valve and user manual (check valve prevent back siphoning).
  • Strong Airflow, Low Consumption — Our 1-watt small betta air pump is very energy saving with max flow rate up to 50 gallon per hours, capable of operating small sponge filter and large air stone, creates tons of tiny bubbles, increasing water movement and circulation.
  • Widely Application — For use with air-driven aquarium accessories like air stone, ornaments and small sponge filters. Mini Aquarium Air Pump only measures 3.5 x 2 x 2 inches. Powerful, lightweight, low noise, along with long service life.
  • Up to 20 Gal — A great small fish air pump for freshwater and saltwater aquariums and hydroponic systems up to 20 gallon.
  • Easy to Install — Connect air pump with air tubing, check valve and air stone, less than few minutes installation and you'll good to go.
Check Stock

Edwards 8 RV8 Rotary Vane Dual Stage Mechanical Vacuum Pump A65401903

  • High reliability – generous lubrication of moving parts. Safe process and systems – fast acting inlet valve for best in class anti‑suck back protection..
  • Configured to meet your vacuum needs – mode selector and two position gas ballast. No unplanned downtime – designed for easy maintenance..
  • Better work environment – quiet running and intrusive frequencies minimised. Two position gas ballast allows either 60 g/hr or a class leading 220 g/hr (290 g/hr on RV12) of water vapour to be handled. Universal motor to cover the widest possible voltage and frequency range from a single variant..
  • Smooth controlled inlet valve opening by oil pressure to eliminate pressure surges. Rapid closing inlet valve within 0.4 seconds of pump stopping..
  • Pump oil is not included, please purchase the pump oil separately.Recommended oil:Ultragrade 19(Not inculded).
Check Stock

Inficon Model QS5, Vacuum Pump, 5 CFM Air Displacement, 110V/220V, 700-100-P1

  • Includes: QS5, Detachable power cord, Vacuum pump oil.
  • 5 CFM displacement for vacuum down to 15 microns.
  • Inlet check valve prevents oil from flowing back into the system.
  • Oil demister helps reduce oil in exhaust.
  • Recessed power switch can't accidentally be tripped.
  • US Technician Support via Email and Phone.
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • ...your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color coded scale, helps to monitor vehicles' fuel pressure easily. Equip with pressure relief valve and 16" drain hose for safer pressure discharge and fuel recovery. Reliable nylon resin hose is resistant to fuel, wear and corrosion.
  • CHECK FUEL INJECTOR PUMP PRESSURE: Proper fuel pressure is vital for engine operation and performance. No matter higher or lower fuel pressure can cause many engine problems and both require great attention. Higher value may result from a bad oil pressure regulator or curved outlet oil return line. Lower one may due to internal components' kink/breakage/clog, bad fuel pump, regulator or low fuel tank pressure. You can troubleshoot possible problems based on the vehicle manufacturer's user manual.
  • SATISFACTORY CUSTOMER SERVICE: This fuel injection pump pressure test kit helps to find most auto fuel system issues, it is a must have kit for DIYer or professional mechanic. Items are protected well in a sturdy case. 30 days full refund with returned undamaged JIFETOR fuel injector pressure tester. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazo....
Check Stock

HEYTUR Inflatable Boat SUP Pump Adaptor Standard Schrader Conventional Air Pump Air Valve Adapter Spoke Plate Attachment(Black)

  • ...g, the standard valve for car and bicycle tires..
  • It works on the majority of inflatable stand up boards. It is also suitable for boats and kayaks which also use the Halkey-Roberts valve for inflation.Use your compressor or tire pump to easily reach 20 PSI.Be very careful not to over inflate your board or craft, and check the board's pressure frequently..
  • This is an adaptor only. The speed at which your board inflates will depend on the pump used.Because the compressors/tire pumps take time to inflate, it is recommended to inflate the board by hand hand pump until it becomes difficult to pump, and then use the adaptor to top off the pressure..
  • Remove your SUP valve cap and ensure that the valve is sealed for inflation by rotating the central pin into the outer/closed position.Insert the valve adapter into the SUP valve the same way as you would insert the pump hose nozzle. Connect any standard schrader pump to the valve adapter fitting to inflate your board. Monitor board pressure frequently while inflating!.
  • If you have any problems, please contact with us directly. Simply e-mail us the problem, the solution will be provided in the least time..
Check Stock

PIILOO High Pressure Oil Pump HPOP Master Service Kit with O-Ring Seals & Base Gasket Compatible with Ford Powerstroke 7.3L 1994-2003 and Navistar DT466 & T444E 1995-2004

  • APPLICATION–Perfectly compatible with Ford Powerstroke 7.3L 1994-2003 and Navistar DT466 & T444E 1995-2004. (Part Numbers ISK635, ISK617, ISK795, and TL3).
  • MATERIAL–High quality rubber material o-rings seal and high standard fittings and gaskets, durability, anti-wear, anti-tear, leakproof, corrosion resistance, and longer service life..
  • FUNCTION–A complete tool kit prevents oil leakage and help replace all seals and o-rings on the high-pressure oil pump, and reinstall the pump correctly..
  • KIT CONTAINS–2-Discharge port O-rings / 1-Rear Port Plug O-ring / 1-Non-Serviceable Port O-Ring / 1-IPR Valve O-Ring / 1-IPR Nut / 1-Fill Plug O-Ring/ 1-Non-serviceable port long threaded repair plug / 1-Replacement Check Ball / 1-5ml Thread Sealer / 2-Diesel High Pressure Oil Pump STC Fittings / 1-STC Quick Disconnect Tool / 1-High Pressure Oil Pump Mounting Gasket..
  • SATISFACTION–Goupgo offer 100% brand new and high quality High Pressure Oil Pump Service Kit to every customer. If you are not satisfied with the item, simply return it for a full refund within 30 days. Don’t hesitate to contact us if you have any questions..
Check Stock

Troy Bilt Complete Pump Head Assy for RMW and SRMW Pumps AR42518

  • ...features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Skip the Oil Change: This pump features a maintenance-free crankcase so you never have to change the oil. It is manufactured from fully anodized die-cast aluminum for protection against corrosion.
  • Extended durability: A Thermal Relief Valve (TRV) protects the pump from overheating while in bypass mode. The TRV releases small amounts of hot water and intakes cooler water to prevent overheating and extend the life of the pump.
  • Get the right pump for your machine: this pump is designed for gas-powered pressure washers with horizontal engines. Its SAE bolt pattern, hardware, and standard connections make it a great fit for many brands and models of power washers.
Check Stock

Maxmoral 10PCS Plastic One Way Air Pump Check Valves Non-Return Aquarium Fish Tank Air Pump Stop Valve Accessories Black

  • Made of high quality material,durable,not easy to aging,ensure long service life..
  • Function:Protect you air pump by preventing aquarium water from back siphoning during a power outage..
  • Easy to install,the check valve can be used for most aquarium air pumps..
  • Great one way check valve for aquarium air pump,effective protection for your air pump,can be equipped with your fish tank for a long time..
  • Package included:10pcs Black Aquarium air pump check valves..
Check Stock

attwood Sahara MK2 800 GPH 12-Volt Automatic Bilge Pump

  • 800 GPH, 12V, Fuse size: 4A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
  • The easiest, most reliable automatic bilge pump ever designed.
  • The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
  • Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
  • Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
  • Universal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its category.
  • SteadySwitch: Buoyancy control reduces cycling, draining the bilge not the battery.
  • No Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridge.
  • Improved Motor Cooling/Heat Dissipation: Prevents overheating that may cause failures, such as blown fuse, leaking, etc..
  • Includes straight outlet and check valve.
Check Stock

Sink Soap Dispenser Extension Tube Kit 47' with Check Valve, No Need to Fill The Little Bottle Again!

  • MAKE YOUR LIFE EASIER: With 47" sink soap dispenser extension tube kit, use the big bottle directly, no need to refill small bottles anymore..
  • HIGH QUALITY: Food-Grade silicone soap tube is soft and elastic, check valve make it easier to pump out the soap..
  • EXCELLENT DESIGN: We supply 4 multiple caps to fit most soap and lotion containers. A check valve and pp ball keep soap primed at the top of the tube!.
  • EASY TO USE: With the long hose, skipping the messy process of refilling the soap dispenser. The check valve and pp ball will keep soap always primed in your soap dispenser, so you don’t waste time pumping..
  • WHAT YOU GET:4 bottle stoppers to fit most soap containers, a check valve connect two tubes, a pp ball and 2 fastening bolts.NO SOAP DISPENSER PUMP INCLUDED..
Check Stock