Top Oil Pump Gear Shim

OEMTOOLS 24389 1.4 Gallons (5.3L) Manual Fluid Extractor, Fluid Extractor Pump, Oil Extractor Vacuum, Auto Oil Extractor

  • Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid evacuator pump.
  • Easy Oil Change: No more crawling under cars for oil changes.
  • This topside oil extractor pump pulls oil from the dipstick tube, allowing you to stay right side up the whole time.
  • Move Fluid with Less Mess: An automatic shutoff valve and single piece construction are the cleanliness dream team, helping you keep the fluid off your floor.
  • Longer Reach: A 5 foot long flexible main suction hose connects to the improved 41 inch long dipstick hose adapter or to the 17 inch long suction hose adapter for plenty of reach.
  • Pump for Joy: The manual extraction pump quickly evacuates up to 1.4 gallons (5.3L).
  • Get fast, easy, and effective fluid extraction with no compressed air required.
Check Stock

Aluminum 15 to 55 Gallon Drum Pump Rotary Hand Liquid Transfer Heavy Duty Rotary Barrel Pump Hand Drum Pump for Kerosene Gasoline Oil Fuel Diesel Hydraulic Fluid

  • Hand Drum Pump: The overall height of the pump is 51inch, the length of the oil outlet pipe is 39 inch, and the inner diameter of the oil outlet is 1.1" (28mm). oil outlet pipe can be adjusted to fit 15 to 55 gallon drums. Tip: only for oils. Note: Do not use it to pump water,it is not suitable..
  • Quality Aluminum: Our drum pump is made of high-quality all aluminum material, which is highly anti-corrosion and anti-rust, durable and lasts longer. Our 55 gallon drum pump supports clockwise transfer handle instead of counterclockwise transfer handle..
  • Applicable Type of Oil: Extractable liquid: Diesel oil, kerosene, engine oil, hydraulic oil, Gear oil, edible oil (but not edible grade). Liquids that cannot be extracted: Gasoline, water, urea, acid-base liquid, corrosive liquid, chemical liquid, edible liquid, etc. cannot be extracted..
  • Great Filter: Our hand liquid transfer drum pump distribution has a fine filter. You only need to install it at the bottom of the suction tube, which can effectively separate the oil dirt and oil, so as to ensure that pure oil is pumped..
  • Good Sealing: 3 piece segmented suction tube, easy to adjust the length of suction tube according to the actual situation, and easy to store and carry at the same time.suction tube with screw....
Check Stock

TuhooMall Fluid Extractor Syringe Pump,200cc Fluid Extractor,Fluid Extraction and Fill Pump,200cc Fluid Extractor Filling Syringe Pump Manual Suction Vacuum Fuel Car Automotive Transfer

  • Fluid Extractor and Filler:Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more..
  • Lock Design: 200cc extraction and fill pump,just push the hose into the end of the pump and it is locked into place automatically. So you never have to worry about it pulling off or blowing off when you use the pump to fill things..
  • Include:The extraction and fill pump includes two a 7-Inch by 1/4-Inch (outer diameter) hose extension for deep reach and small diameter applications, locking cap on end of hose and a 7.5-Inch/19-Centimeter clear hose..
  • Easy to Use: 200cc fluid extractor syringe pump designed for leak-free extraction of a variety of caustic mechanical liquids. Includes extension syringe hose for easy extraction through filler necks and reservoirs. And it disassembles for easy cleaning and maintenance..
  • Application:This 200CC/200ML/0.21QT/7OZ fluid extractor syringe vacuum pump is designed to be chemical and oil resistant. Ideal for extracting or changing engine oils or fluids in automobiles, boats, farm equipment, industrial gear boxes, motor vehicles, motor bikes, RV's,lawn mowers, golf carts and more..
Check Stock

Vevitts 80w Oil Change Extractor Pump 12V Oil Extractor Pump for Changing Diesel Fluid Scavenge Suction Oil Transfer Pump Kits for Jet Ski, Truck, RV, ATV, Boat (Red)

  • 【Instructions for use】1. Please pay attention to the direction of the inlet and outlet, the positive and negative poles and the locking hose lock before use.
  • 2. Please start the vehicle and heat the engine oil to 40-60 degrees for about 5 minutes, otherwise, the oil change pump may have low suction or get stuck. 3. CAN NOT be used to extract water, gear oil (too viscous) or flammable liquid (fuel, gasoline,kerosene,etc.)..
  • 【Complete Diesel Change Pump Kit】The oil transfer pump is mini but powerful. With 4.6ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
  • 【12V 80w Oil Extractor Pump】Oil change pump, a great helper for quick and clean oil changing and transfer, all parameter is verified by multiple test. Diesel Flow Rate: 3.5L/min, Engine Oil Flow Rate(40-60℃): 1L/min, Inlet Tube Length: 1.2m/47.2in, Outlet Tube Length: 1.4m/55.1in, Voltage: 12V, Maximum current: 5A..
  • 【Premium Quality】We use pure copper for motors.Good conductivity, corrosion resistance and rust resistance, effectively avoid leakage or short circuit. Instead of manual operation, it can help you change oil quickly and cleanly....
Check Stock

GPI - L5116 High Viscosity Oil Pump 16 QPM 115V/230AC Oil Transfer Pump for Viscous Fluids that Features a 0.75” Ball Valve Nozzle 8 Foot Hose 3 Foot Power Cord with Three-Prong Plug 142100-01

  • DURABLE ALUMINUM HOUSING: Our gear oil transfer pump is for high viscosity fluids and lubricants. Engineered with the lightweight cast aluminum....
  • HEAVY-DUTY OIL PUMP: The L5116 is specially designed for use with new oil (up to 90 wt), waste oil, hydraulic fluid, antifreeze, or other....
  • EXTENDED MOTOR LIFE: The smart thermal protection design extends the motor life of our heavy-duty oil pump with the versatility to handle a variety of....
  • EASY-TO-USE: Accompanied by a pre-installed 3 foot power cord with a three-prong grounded NEMA plug, this oil pump greatly reduces assembly and....
  • 1-YEAR WARRANTY: Built with high-quality parts, this CSA approved hydraulic oil transfer pump comes with a 1-year manufacturer’s warranty that gives....
Check Stock

Mercruiser Engine Oil Change and Sterndrive Gear Lube Maintenance Kit

  • Fits all Mercruiser sterndrive GM engines (except 4.3L V6 without remote oil filter).
  • Includes Water Separating Fuel Filter 35-802893T & Oil Filter 35-866340K01.
  • Includes 2-4-C Marine Grease 92-802859A1.
  • Includes SAE 25W-40 Marine Engine Oil 92-8M0078628 and 92-8M0078627.
  • Includes 3 Quarts High Performance Gear Lube 92-858064K01 with Washers and Gear Lube Fill Pump.
Check Stock

VICRING Fluid Extractor 200CC Oil Extractor Pump Manual Suction Vacuum Made Plastic Automotive Fluid Syringe Pump Car Fuel Transfer 7oz Syringe Type Oil Pump

  • [HIGH QUALITY AND LEAK-FREE]VICRING Oil extractor pump is made of high quality plastic material, which is robust, strong and long-lasting. Fluid extractor exterior has a clear and distinct scale for easy checking of the liquid balance.Oil transfer pump has a capacity of 200cc..
  • [FREE ALL CONCERNS ABOUT CHANGING FUEL] VICRING Oil fluid extractor is designed with a double rubber ring, which is not easy to leak oil. Oil transfer pump is suitable for power steering, coolant, oil change, rear axle rear grease change, and even for transferring high viscosity fluids..
  • [NOT EASY TO FALL OFF]VICRING Fluid extractor interface is designed with a snap so that the extension rod will not fall off easily, and with two extension rods attached, the residual oil at the bottom can be simply pumped out. The back cover of the fluid extractor pump is removable so that the remaining oil inside can be cleaned after use..
  • [EASY TO USE EVEN FOR BEGINNERS] Use the simple syringe-type actions of liquid delivery Oil Extractor syringe bottles (gearbox, brakes, steering, differential extraction dispensers) to quickly and cleanly in and out (extraction or....
Check Stock

LYCARESUN 15 to 55 Gallon Drum Pump, Aluminum Barrel Pump Hand Liquid Transfer, Hand Siphon Barrel Pump, Hand Drum Pump for Gasoline Oil Fuel Diesel, Kerosene, Hydraulic Fluid

  • Adjustable Drum Pump: It consists of 3 segmented suction tubes, the total height of the pump is 51 inch, easy to adjust the length of suction tube according to your need. The outlet pipe can be adjusted to fit 15 to 55 gallon drums..
  • Quality Assurance: Our roller pump is made of high-quality aluminum materials, with high anti-corrosion and rust prevention capabilities, and is durable. Each set has been tested before reaching the sales standard..
  • Filter: Each drum pump set is equipped with a filter. Just install it at the bottom of the oil suction pipe to effectively purify the oil and filter out impurities..
  • Good Sealing Performance: The oil suction pipe is threaded, not easy to wear, with high hardness, good connection performance, strong sealing, and effective prevention of oil leakage..
  • Scope of Application: Liquids that cannot be extracted: acid-base liquids, corrosive liquids, gasoline, water, urea, chemical solutions, edible liquids, etc. Extractable liquids: engine oil, hydraulic oil, gear oil, diesel oil, kerosene, edible oil (but not edible grade)..
Check Stock

SMOTIVEPRO Engine Oil Extractor Pump Brake Fluid Extraction Syringe Vacuum Filling and Extracting Pump Capacity 500CC

  • SUPERIOR MATERIALS:The Syringe oil extractor pump made of high quality, solid, durable material, Built-in dual rubber pads, fit the piston closely to avoids leakage,Thicken wall enhances high strength and provides long service life..
  • Extra tubes and Different Capacity for Choice: Extra tubes make extra length for jobs in hard to reach places and won't have to worry about spillage during use. Different Size Brake fluid extractors provide best Choice on the Capacity:0.5Liter/1.5Liter.
  • Extraction and Infusion of Liquid: Simple syringe-type action using the manual fluid pump can dual-way extract and fill fluid by differential extractor dispenser quickly and easily. Ideal for emptying or filling up the master tank and other reservoirs, extracting brake fluid from the tank and adding new oil before flushing the brake fluid to the brake caliper..
  • Widely Application: Ideal for extracting or changing engine oils or lubricants in ATV's, boats, farm equipment, industrial gear boxes, motor vehicles, motor bikes, RV's, etc. Applicable to engine oil, gear oil, gearbox oil, including chemical resistant oils,brake fluid, diesel fuel, coolants, hydraulic systems and water, etc..
Check Stock

Happybuy 10152 PSI Hydraulic Electric Pump 750W Double Acting Hydraulic Driven Pump 110V 7L Solenoid Pedal Hydraulic Power Pack Cylinder Hydraulic Pump

  • Efficient Motor: Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 2Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.6L/min - 5L/min..
  • Large Capacity Tank: With a hydraulic pump tank, 7L capacity, the hydraulic power pack is efficient. A visible window for monitoring the inside. The pump uses the 15 - 46 anti-wear hydraulic oil. It features compact size, lightweight, simple structure, and ease of use..
  • Accurate Pressure Gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the pump is working at any time. From 7Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
  • Effective Oil Volume: Manage this double-acting hydraulic gear pump by the solenoid valve. The high-pressure oil pipe is of high quality and durability. Control two with double pipes..
  • Various Application: The manual hydraulic pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency..
Check Stock

Mxmoonant 12V Oil Transfer Pump, 3.2GPM Self Priming Oil Change Extractor Pump, Fuel Transfer Pump with Hoses for Diesel Kerosene Marine Boat Truck

  • [STRONG SUCTION & LOW NOISE] This electric gear oil pump has a self-priming range of up to 3m/10ft, and the max flow is up to 3.2GPM/12LPM. When the machine is working normally, the sound is around 55-60db. In addition, it is also equipped with shock-proof rubber mounting feet, which can greatly reduce the working noise..
  • [HOSE INSTALL] This fuel transfer pump is small in size and easy to carry, making it convenient to install in various directions in a limited space. The port diameter is 3/8’’ (10mm), which can meet most of the hoses on the market. Of course, if you don’t have the right accessories for a while, we also include a one-meter black oil hose and two fixing clips, which can help you transport in time and bring you a better experience..
  • [TRANSFER & CHANGE] This oil change pump has a vacuum self-suction function, which is generally used in the liquid replacement and transfer of large trucks, engineering vehicles, harvesters and small refueling equipment, including diesel, engine oil, lubricating oil, kerosene and other high-viscosity oily liquids.【Tip】Except gasoline petroleum fuel..
  • [OVERHEAT PROTECTION] This oil transfer pump has a built-in overheating protector. And if there is an abnormality such as overheating and overload,....
Check Stock

Happybuy Hydraulic Pump Electric Double Acting Manual Valve Hydraulic Pump 10000 PSI Electric Hydraulic Power Unit for Home and Commercial Using (Double Acting)

  • Efficient Motor: Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 2Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.9L/min - 5L/min..
  • Large Capacity Tank: With a large fuel tank capacity, 8L, the hydraulic power pack is efficient. A visible window for monitoring the inside. The pump uses 16th hydraulic oil. It has the advantages of compact size, lightweight, simple structure, and ease of use..
  • Accurate Pressure Gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the hydraulic pump is working at any time. From 2Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
  • Effective Oil Volume: Manage this double-acting hydraulic gear pump by a lever which has a rubber cap in one end for a comfortable grasp and use. Control two equipment at the same time, pretty efficient. The oil pipe coupling is fitted with a PT3/8” thread..
  • Various Application: The manual hydraulic pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. ....
Check Stock