Top Oil Pump Tube

MSR Expedition Field Service Kit for Camping and Backpacking Stoves Dragonfly Kit

  • Each kit includes: Jet & Cable Tool, O-Rings, Pump Cup oil, Safety Pin, Pump Seal, Air Tube, Fuel Tube and Filter, Shaker Needle, Fuel Tube Bushing,....
  • Dragonfly Service Kit also includes: DragonFly Flame Spreader, DragonFly G-Jet, DragonFly K-Jet, Fuel Line Filters, Cool Fuel Tool.
Check Stock

Electric Siphon Pump, Hand Fuel Transfer Pump Battery Powered, Gas/Oil/Fuel/Gasoline/Water/Liquid Transfer Siphon Pump (Red)

  • 【Portable Handheld Water Pump】Move liquids safely and easily with this convenient handheld pump. It is non-toxic, tasteless, easy to use, durable and so on..
  • 【Ease to Use】Has an red switch at the top to start the electric Syphon pump. Each set comes with a circle ring. Increase firmness on the hose..
  • 【Easy to Carry and Store】Electric siphon pump length: 63cm/24.8inch. Tube length: 56cm/22inch. Lightweight, Portable manual oil pump kits, easy to carry and storage..
  • 【Battery Powered】This battery powered pump will save you the headache and mess when you need to pump gas, water, oil, and other light solvents.(Package does not include batteries).
  • 【Wide Application】This portable handy transfer pump can be used for gas, water(not for drinking), oil and other non-corrosive liquids. This durable transfer pump can use in garage, aquarium, home, yard, basement, bathroom and so on..
Check Stock

Oil Transfer Pump Extractor, Electric Oil Pump Fast Oil Change Transmission Fluid Extractor Pump, 12v 60w Diesel Fluid Scavenge Suction Pump for Changing Oil, Boat, Tubes, Truck, RV, ATV, Riding Mower

  • QUICKEST, CLEANEST OIL CHANGE EVER! - Oil Pump for Oil Change. Helps bleed diesel engines after filter change essential tool. Suck up to pump, good to go! Just get the motor warm. Turn it off and turn on the oil pump extractor. Its that easy. It drains to the last drop. Makes your oil changes that much quicker and cleaner. Worked great to suck out old brake fluid, differential fluid, gear oil, transmitting fluid..
  • POWERFUL SUCTION OIL FUNCTION- This high efficient battery powered oil extractor pump is easy to pump various fluids and oils. Easy to put together, all the hoses came with it. You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery, ran the small hose down the dipstick tube and turned it on, and press the button. Simple On/Off Power Switch, easy to use. Great for a quick oil change..
  • DIFFICULT OIL EXTRACTION NO MORE - The 12v Oil Change pump extractor are very easy to use and makes a top down oil change so easy. Ideal diesel fluid oil transfer pump extraction equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore..
Check Stock

OEMTOOLS 24389 1.4 Gallons (5.3L) Manual Fluid Extractor, Fluid Extractor Pump, Oil Extractor Vacuum, Auto Oil Extractor

  • Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid evacuator pump.
  • Easy Oil Change: No more crawling under cars for oil changes.
  • This topside oil extractor pump pulls oil from the dipstick tube, allowing you to stay right side up the whole time.
  • Move Fluid with Less Mess: An automatic shutoff valve and single piece construction are the cleanliness dream team, helping you keep the fluid off your floor.
  • Longer Reach: A 5 foot long flexible main suction hose connects to the improved 41 inch long dipstick hose adapter or to the 17 inch long suction hose adapter for plenty of reach.
  • Pump for Joy: The manual extraction pump quickly evacuates up to 1.4 gallons (5.3L).
  • Get fast, easy, and effective fluid extraction with no compressed air required.
Check Stock

HORUSDY Portable Power Battery Pump, 2.2GPM, Water & Fuel Transfer Pump

  • DURABLE RUBBER MANUAL HAND SIPHON PUMP - This syphon pumps is super easy to use, you just put the fuel transfer hoses in where you want them and pump the hand pump and it draws out all the fluid. This gasoline siphon pump made it effortless to empty out my gas tanks. So worth the purchase and it'll pay for itself in the gas savings alone in one season!.
  • QUICK FUEL TRANSFER - The siphon pumps the oil from one container to another easily, and is meant to go down into a fuel tank without an anti-siphon filter. The gas syphon is great for stealing a bit of gas for your lawn mower when you need it, you just push the tube down, start pumping the bulb and fuel starts to flow, the same as with the old way of sucking on the tube but this is much safer..
  • HEAVY DUTY HOSE - The gasoline siphon hose tube is able to get into small spaces. Siphon tube is nice and thick so no easy break/crushing. Siphon hand pump is made of a thick silicone outer frame. Make sure you put the long hose into the liquid you want to pump out and the short tube on the end of the rubber ball where you want to send the liquid. The tank height must be at least 30 inches or higher than the receptacle..
  • NO MORE MESS WHEN TRANSFERING LIQUIDS ! - This siphon gas pump transfer allows you ....
Check Stock

BLACKHORSE-RACING LS Billet Aluminum Oil Diverter Barbell & Oil Bypass Valve Plug & Oil Pickup Tube Hold Down Kit Compatible with GM Gen III & IV LS Engines

  • ★A 1/4-20 threaded hole in the end of the Barbell for easy removal. No more digging and prying.
  • ★Material：CNC Billet 7075 billet aluminum material for long lasting durability.
  • ★Easy to install: use the existing extra hole on the oil pump.To be sure your oil tube sits flush on the oil pump so the O-ring can do its job,....
  • ★Fitment: LS1-2-3-6-7-9-LQ4-LQ9-4.8L-5.3L-6.0L-6.2L L92 LS4 L99 LSA and more.
  • ★Package Includes:1x Oil Diverter Barbel,1xOil Bypass Valve Plug ,1x Oil Tube Hold Down,Includes High Strength 10.9 Bolt,As the picture shown.
Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 3:1 Fast Flow Rate 7.4gpm / 28lpm for SAE130 Oils/Fluids

  • PUMP SPECS - This Air Operated (Pneumatic) Double Action Oil Transfer Pump has a High Flow rate of a Max 7.4GPM / 28LPM.
  • A Max Air Inlet Pressure of 5-8BAR / 70-115PSI.
  • An Air Motor Effective Dia. of 63mm 2.5" inch.
  • An Air Consumption (per minute) at 8BAR / 140L at 115PSI / 5.0CFM.
  • Air Inlet Connection of 1/4" inch and Oil Outlet Connection of 3/4" inch Male.
  • A Long Pump Life of 840k Liters / 221k+ Gallons.
  • EFFICIENT DESIGN and CAPABILITIES - Our Transfer Pumps are Double Action and Self Priming designed, delivering fast and precise flow rates.
  • This Smart design uses fewer parts for less pump wear and tear, making it is easy to use and maintain.
  • This pump is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE130 grade oil.
  • PROPER USE and SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
  • This pump can be barrel, cart or wall mounted.
  • A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
  • Follow manual for setup and always use the proper add....
Check Stock

Z Whip LS Oil Pump Pickup Tube Girdle Pipe Hold Down Brace Support Billet Bracket MADE IN THE USA Compatible with GM Chevy LS Series Engines LSX LS1 LS3 LS2 LQ4 LS6 LQ9 5.3L 6.0L 6.2L

  • Compatible with all LS Series Engines 1997-2014 (GEN. III/IV small block chevy).
  • The factory oil pickup tube on LS engines is only secured by one bolt. This can potentially lead to a poor seal on the oil pump. Our Billet aluminum Oil pump girdle solves the issue by placing a clamp on both sides of the tube, securely holding it in place..
  • DOES NOT fit any LS oil pickup tube with welded flanges (GM # 12608593, Holley 302-1 and similar tubes). DOES NOT fit pickup tubes with two screw holes on their flange (Holley 302-2 tube and similar tubes)..
  • Proudly made in the USA from Aerospace Grade Billet Aluminum.
  • We are an AS9100D and ISO 9001:2015 Certified Manufacturer. Parts we produce fly at 30,000 feet where failure is not an option..
Check Stock

LYCARESUN 15 to 55 Gallon Drum Pump, Aluminum Barrel Pump Hand Liquid Transfer, Hand Siphon Barrel Pump, Hand Drum Pump for Gasoline Oil Fuel Diesel, Kerosene, Hydraulic Fluid

  • Adjustable Drum Pump: It consists of 3 segmented suction tubes, the total height of the pump is 51 inch, easy to adjust the length of suction tube according to your need. The outlet pipe can be adjusted to fit 15 to 55 gallon drums..
  • Quality Assurance: Our roller pump is made of high-quality aluminum materials, with high anti-corrosion and rust prevention capabilities, and is durable. Each set has been tested before reaching the sales standard..
  • Filter: Each drum pump set is equipped with a filter. Just install it at the bottom of the oil suction pipe to effectively purify the oil and filter out impurities..
  • Good Sealing Performance: The oil suction pipe is threaded, not easy to wear, with high hardness, good connection performance, strong sealing, and effective prevention of oil leakage..
  • Scope of Application: Liquids that cannot be extracted: acid-base liquids, corrosive liquids, gasoline, water, urea, chemical solutions, edible liquids, etc. Extractable liquids: engine oil, hydraulic oil, gear oil, diesel oil, kerosene, edible oil (but not edible grade)..
Check Stock

LUMAX LX-1336 Red Plastic Bucket Pump with Flex Hose and Non-Drip Nozzle. 5-6.5 Gallon (20-25 L) Capacity. Self-Priming, Push-Down Action Pump. Discharge Capacity: 3 Fluid Ounces per Stroke.

  • Push-down action pump that fits 5 gallon pails.
  • Precision buna-n seal that eliminates by-pass.
  • 50 inches flex hose has non-drip nouncezle.
  • 3 fluid ounce per strokeDescriptionThe plastic bucket pump with flex hose and non-drip nozzle is a plastic bucket pump with zinc-plated steel tube for transferring non-corrosive fluids of light to medium viscosity like, engine oil, gear oils, transmission fluid, automotive additives, machine oil, etc. It is a self priming, push-down action pump that fits 5 gallon pails, has a drain-back nozzle that prevents spills and accidents, a precision buna-n seal that eliminates by-pass, a nylon piston for durability, and a zinc plated, corrosion-resistant suction tube. It includes a 50 inches oil-resistant flex hose with non-drip nozzle, has a 1 inches inlet port, and a 1/4 inches outlet port. The discharge capacity is 3 ounce per stroke..
Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 1:1 Fast High Flow Rate 8.5GPM / 32LPM for SAE130 Oils/Fluids

  • SPECIFICATIONS - This Air Operated (Pneumatic) Double Action Oil Transfer Pump has a High Flow rate of a Max 8.5GPM / 32LPM.
  • A Max Air Inlet Pressure of 5-8BAR / 70-115PSI.
  • A Max Fluid Pressure of 8BAR / 115PSI. An Air Motor Effective Diameter of 63mm 2.5" inch.
  • An Air Consumption (per minute) @ 8BAR / 130L @ 115PSI / 4.7CFM.
  • An Air Inlet Connection of 1/4" and Oil Outlet Connection of 3/4" Male.
  • A Long Pump Life of 960k Liters / 253k+ Gallons.
  • EFFICIENT DESIGN and CAPABILITIES - Our Transfer Pumps are Double Action and Self Priming designed, delivering fast and precise flow rates.
  • This Smart design uses fewer parts for less pump wear/tear, making it is easy to use/maintain This pump is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE80 grade oil.
  • PROPER USE & SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
  • This pump can be barrel, cart or wall-mounted.
  • A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
  • Follow manual for setup and always use the proper additional equi....
Check Stock

EONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox

  • Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
  • Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
  • Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
  • Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
  • Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check Stock