Top Optical Communication Testing

SparkFun XBee Explorer Dongle - Red

  • UART communication board, XBee interface, USB interface.
  • XBee USB Adapter is a UART communication board which supports XBee connectivity, features UART interface, USB interface, and onboard buttons/LEDs,....
  • Test XBee modules: onboard buttons/LEDs for easy testing. Program/Configure XBee modules: make it easy to program/configure the XBee modules....
  • USB to UART module: features CP2102, provides UART interface and power output interface, connect it to your system easily.
  • Note:The XBee/ZigBee modules and Core2530 (B) in the photos are NOT included..
Check Stock

Fiber Attenuator Singlemode Simplex LC/UPC Fixed 2dB

  • [MAIN PARAMETER]: LC/UPC Female to LC/UPC Male.
  • [MATERIAL]: The core material of the adapter is ceramics..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

Networx Fiber Optic Attenuator, Fixed - LC/UPC 20dB

  • [MAIN PARAMETER]: FC/UPC Female to FC/UPC Male.
  • [MATERIAL]: The core material of the adapter is ceramics..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

GUPRTO Circuit Tester Multimeter Automotive Tools car Tester oscilloscope Attachment Needle Tester Ammeter Tips cope Car Tools for Cars Multimeter

  • -Sharp stainless steel needle is extremely thin and hard, which can easily prick the cable sheath for measuring without spliting it..
  • -Use for auto maintainance, tele-communication testing, construction site testing and some other cable non-destructive testing..
Check Stock

KEYESTUDIO Microbit Sensor Breakout Board V2 I2C SPI Micro USB for BBC Micro:bit

  • Particularly design this keyestudio sensor expansion board V2 for micro:bit. breaks out all the PIO ports on the micro:bit control board into 3PIN interface (GND, VCC, Signal), easy to connect it with other sensor modules..
  • Extending some commonly-used serial communication interfaces into pin or female headers with 2.54mm pin pitch, such as I2C and SPI communication pins.Allows communication between micro:bit control board and other communication devices..
  • Two kinds method to power the micro:bit board, through a black DC jack (DC 7-9V) or a mciro USB port (DC 5V) on the shield..
  • Connection Diagram, Sample Code, Using Method and Resources are provided in our wiki page. Technical support is available via email or message..
  • Solder is very clean, everything is aligned nicely, all boards are well packed after function, voltage, current testing, protected in a beautiful box. Up to FCC and CE Standard: made from environmentally friendly components and materials..
Check Stock

Tricycle Dreams

  • Precise timing of a single person moving from the starting point to the end point.
  • Effective laser distance: 0-8m , Wireless communication distance: 500m.
  • Rated voltage and current: 5V 2A , Please use qualified power bank(The device needs three power banks).
  • When testing at close range, please ensure that the laser sensor and the display screen are 2 meters or more away from each other to prevent co-channel crosstalk between the antennas and cause communication errors..
  • Simple operation, plug the power cord into the USB port of the power bank, tap the reset button on the side of the screen for 1s to reset and start using.
Check Stock

Vortex Optics Viper HD 85mm Spotting Scope Reticle Eyepieces (MRAD)

  • Use this MRAD eyepiece to turn your Viper HD 85mm spotting scope into the perfect optical measuring stick for range work and spotter-to-shooter communication..
  • A fixed magnification of 33.5x gives you the power you need, and the eyepiece has a diopter ring and the ability to rotate the reticle to level it with the horizon line, allowing you to dial the eyepiece to your eye and shooting scenario..
  • XR and ArmorTek lens coatings keep your view through the HD optical system crystal clear..
  • Only compatible with Viper HD 85mm models..
Check Stock

uxcell 3dB FC Fiber Optic Attenuator, FC/UPC to FC/UPC Single Mode 9/125 Adapter

  • Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
  • [ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-15dB..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

uxcell ST Mechanically Variable Optical Attenuator, Single Mode/Multi-Mode 0-30dB Adjustable Fiber Optic Attenuator

  • Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
  • [ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

uxcell FC Mechanically Variable Optical Attenuator, Single Mode/Multi-Mode 0-30dB Adjustable Fiber Optic Attenuator

  • Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
  • [ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

uxcell SC Mechanically Variable Optical Attenuator, Single Mode/Multi-Mode 0-30dB Adjustable Fiber Optic Attenuator

  • Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
  • [ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

uxcell SC UPC Mechanically Variable Optical Attenuator, Single Mode/Multi-Mode 0-30dB Adjustable Fiber Optic Attenuator

  • Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
  • [ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock