Top Pcb Terminal Connector

Jienk 5Pcs 6-Pin 300V 10A 5.08mm Pitch PCB Mount Screw Terminal Block Connector for 28-12AWG Cable

  • 【Product Name】 6 Pin, Plug-In 5.08mm/0.2" PCB Terminal Block.
  • 【Rated Voltage】300V, Rated Current：10A.
  • 【Easy to Use】No soldering required. Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. Save you from solder trouble, no need to purchase expensive tool. Great time and money saver..
  • 【Application】: PCB terminal is widely used in electronic equipment, such as small electronic watches, calculates, general computer, communication electronics equipment automatic control system, domestic appliance and warning devices, etc..
Check Stock

DEVMO 28 Pins Jamma Harness Cabinet Wire Wiring Loom for Arcade Game PCB Video Board Machine Video Consoles Jamma Pandora Box 4 5 6

  • ★Jamma Harness with 2x28pins 56 Pin connector that can be used for standard Jamma Arcade cabinet (Machines) and PCBs. 5 Foot Length..
  • ★All wiring uses 22AWG ,Cheaper harnesses will only use 24AWG or 26AWG. The problem is if the resistance of wire is too high, it can cause a significant power loss before the DC voltages even reach the JAMMA PCB..
  • ★Fast connection to power supply with attached terminal forks for all voltages (+5VDC, +12VDC, -5VDC, GND).
  • ★Video signals connect through included standard monitor connector..
  • ★Full Grounding Loop for all those joystick/button micro-switches on your control panel..
Check Stock

1769-OA16 Compact I/O 16 Point Output Module 1769OA16 1 Year Warranty

  • Pitch 3.81mm/0.15" screw terminal block..
  • Terminal block: wire range 26-16AWG, strip length 5mm, Metric M2 slotted screw..
  • FR-4 fiber glass PCB, dual copper layers..
  • Module Dimensions: 83mm x 87mm x 45mm (W x L x H)..
Check Stock

LuoQiuFa10 Set 6-Pin 5.08mm Pitch Male Female PCB Screw Terminal Block

  • Dimensions:Pin Distance 5.08 mm/0.2 inches.
  • Total dimensions: about 31 x 22 x 15 mm (length * width * height).
  • Package Content : 10 Set x PCB Terminal Block.
Check Stock

10 Set 4-Pin 5.08mm Pitch Male Female PCB Screw Terminal Block

  • Pin Number : 4P Pin Distance : 5.08mm/0.2".
  • Male Dimension : 16 x 7 x 7mm/ 0.6" x 0.3" x 0.3" (L*W*H).
  • Female Dimension : 16 x 10 x 16mm/ 0.6" x 0.4" x 0.6" (L*W*H).
  • Package Content : 10 Set x PCB Terminal Block.
Check Stock

ARCELI Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA 2560 R3 DIY Soldered

  • PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
  • Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass..
  • Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs..
  • Note: This is not original Arduino product.it only a substitute accessories from ARCELI.
Check Stock

Open Terminal Connector Crimping Tool Kit,2.8mm 3.5mm 3.9mm 4.8mm 6.3mm 24-14 AWG Crimper SOMELINE for Use on Molex 2.13mm 2.36mm AMP - TE CONNECTIVITY Connectors,Male Female Spade and Ring Terminal

  • ✅ 【Adjustable Crimping Tool】With an automatic adjustment ratchet mechanism, an adjustable locking device, and the function of releasing pressure points. crimper tool is designed to crimp 24-14 AWG non-insulated open barrel, OEM-style terminals and wire splices It provides the perfect crimping service for the connector you buy..
  • ✅【 Crimping Pliers Capacity】Crimping tool has a wide range of crimping capacity. It’s capable of crimping 2.8mm, 3.5mm, 3.9mm, 4.8mm and 6.3mm pitch open barrel terminals from Molex Standard .093"/MX150/MLX Crimp Terminal , AMP - TE CONNECTIVITY Mate-n-Lok/FASTON Connector etc..
  • ✅ 【Type and Size】The terminal block is made of copper, which has high conductivity, oxidation resistance and durability, enough to meet the needs of most DIY projects. 240 wire crimp terminals (TAB 2.8mm, 4.8mm, 6.3mm spade connectors and insulating sleeves) for 24-14 AWG cable. A portable storage box is provided for easy storage and sorting of cable terminations..
  • ✅【Ring Terminal】Brass ring terminals, commonly used for cycling battery connections and ground connections, connecting aftermarket switches, ignition coils, ground wires, and similar items that require screws or bolts..
  • ✅【Widely Application】The combination of crim....
Check Stock

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

20Amp 2x10 Position Barrier Terminal Block Distribution Module for AC DC

  • 20 Amp 48V 2x10 Position Barrier Terminal Block Distribution Module for AC DC. You can chose input from Barrier terminal block, Banana jack or DC....
  • Rated current 20 Amp(input from barrier terminal block). Input from banana jack maximum current 6 Amp. Input from DC power jack maximum current 5 Amp.....
  • Barrier terminal blocks: pitch 7.62mm, screw Metric M3(thread diameter 3mm). Banana jacks: standard 4mm jack. DC power jack: for 5.5mm x 2.1mm plug..
  • Packing list: 1x Terminal block distribution module. 1x Red banana plug. 1x Black banana plug. 11x Red spade terminal connectors (support wire 0.5 to....
Check Stock

420pcs Non-Insulated Ring Terminals & Fork Connector Kit 22-16/16-14/12-10 Gauge Wire Lugs Battery Cable Terminals Wire Crimp Connectors High Temperature T2 Pure Non-Insulated Copper Connector

  • Ring Terminal & Fork Connector Kit Material: T2(99.9% Purity) Copper.As a wire crimp connector, it has strong conductivity and is not easy to corrode.
  • ELECALL selects 18 types of wire connector. Group by ring and fork with three suitable wire type. Model OTA-B: "A" means the wire square(mm²) that this ring terminal or fork connector can hold, "B" means the inner diameter of the ring or fork for screw..
  • Non insulated ring terminals high quality gurantee: producted under UL standard；High corrosion resistance；silver welding wire thickness: Comply with international standard,High temperature battery terminal connectors resistant heavy ring connector.Copper content ≥ 99%, conductivity ≥ 96%, high conductivity, ductility and corrosion resistance,It's a good helper for wire connection.
  • Fork Connector(AWG22-16)-0.12"-30pcs (AWG 22-16)-0.16" -30pcs (AWG 22-16)-0.2" -20pcs Fork Connector (AWG14-12)-0.12" -30pcs (AWG14-12)-0.16" -30pcs (AWG14-12)-0.2" - 20pcs (AWG14-12)-0.25" - 20pcs Fork Connector (AWG12-10)-0.2" -15pcs (AWG12-10)-0.25" ----- 15pcs.
  • Ring terminal(AWG22-16)-0.12"-30pcs (AWG 22-16)-0.16" -30pcs (AWG 22-16)-0.2" -20pcs Ring terminal (AWG14-12)-0.12" -30pcs (AWG14-12)-0.16" -30pcs (AWG14-12)-0.2" - 20pcs (AWG14-12)-0.25" - 20pcs Ring terminal....
Check Stock