Top Petrol Torch
ABN Oxygen & Acetylene Torch Kit – 10 Pc Welding Kit Metal Cutting Torch Kit, Portable Cutting Torch Set Welder Tools
- OXY ACETYLENE TORCH KIT: The ABN Oxygen Acetylene Torch Kit for Welding and Cutting is a 10 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.
- Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
- EASY TO USE: To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
- Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
- Move the torch tip slowly along the line of your cut until the metal has fully parted.
- CREATING A NEUTRAL FLAME: A neutral flame creates carbon dioxide that purges air from the heated metal for easier cutting and welding.
- To create a neutral flame, you must find the correct relationship of oxygen to acetylene.
- After adjusting the pressure and connecting the oxygen and acetylene tank systems to the brazing torch kit, open the acetylene gauge and light the torch.
- Begin opening the oxygen valve and continue adding oxygen until sharp cones are created at the tip of the portable torch.
Check StockEvolution (R300DCT+) - 12 in Concrete Saw (Aka Circular Saw, Angle Grinder, Chop Saw, Cut Off Saw, Demo Saw, Disc Cutter, Power Cutter) - 15A Motor, No Gas - 4-1/2 in Cut
- Huge Cut Capacity - The all-new Evolution 12 inch concrete cutting saw can cut up to 4-1/2 inch deep! That’s more capacity than most leading petrol-powered saws..
- High Torque Motor. Delivers consistent peak power and prevents the machine from stalling under heavy-load..
- Low Maintenance vs petrol-powered saws. No pull chords, no petrol and no servicing, saves you time and money..
- Dust Suppression - Dual sided water delivery makes this a true tradesman tool and is approved for site use in accordance with dust management regulations..
- Wheeled Skid Plate - Makes straight cuts at ground level effortless, and the metal skid plate protects the tool and lifts the blade off the ground so it can be put down with the blade spinning..
Check StockPropane Torch Head High Intensity, Mapp/Map Gas Torch with Self Ignition & Brass Nozzle, Brazing Soldering Torch for Propane MAPP MAP/PRO Tank
- 【Efficient Ignition】Our professional propane torch head design makes sure the push button igniter can work every time. Thousands of times of tests have proved the torch head igniter is durable..
- 【Stable Performance】Our torch head pressure regulator designs have special procedures. It makes mapp gas torch can be at a horizontal angle or even upside down. (It is not recommended to use upside down for a long time).
- 【Premium Material】Flame control knob easy to size flow. Flame lock keeps the flow in continuous use. The propane torch head comes with cast aluminum body construction, solid brass valve and brass burner tube, for stable performance and long-term use..
- 【Multipurpose Torch】Our propane torch head is fule by Propane, MAPP, Map-Pro cylinder with CGA600 threading.Heavy duty mapp gas torch great for keep on hand and use. The torch head for propane tank easily tailors flame for soldering copper pipes, welding, brazing, heat shrinkage, lighting, cooking and grill..
- 【Satisfied Service】Our torch head provides 30-Day full refund and 1-Year limited service. If you have any questions about mapp gas torch, please tell us, you will get an answer within 24 hours..
Check Stock1/4 inch Fuel Hose Line, Gas Petrol Fuel Line Fuel Line Assembly 3 Feet for Motorcycle Dirt Pit Bike ATV (Yellow)
- 【 Wide Application 】– Fits for most small engine, can be a perfect replacement fuel line and fuel filter for chainsaws, blowers, weedeater whackers trimmers and other engine machines.
- 【 Premium Abrasion Resistant Quality 】– This petrol fuel line is ideal for the transfer of petroleum products. Excellent fuel line for small engines. Great for carburetors! High Quality Petrol Fuel Line, Oil and Gas Resistant, Corrosion Resistant, Resists Swelling and Hardening, low temperature..
- 【Universal Fuel Line Design】– Universal fits for most motorcycle, such as for Honda, Suzuki, Yamaha, etc.Length: 1m / 39.37″/ 3.28 ft.
- Outside Diameter: 1/4 inch/7mm outside diameter.
- 【 1/4 inch Fuel Hose Line 】– The outside diameter of the petrol fuel line hose is 1/4 inch/7mm.
- 【 What You Will Get 】– We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care! If you have any issue about the item, please contact us by e-mail, we will try our best within 24 hours to reply.
Check StockABN Oxygen Acetylene Hose 1/4 Inch B Fittings Twin Welding Hose Oxy Acetylene Torch Hose Cutting Torch Hoses, 25 Foot
- GET THE JOB DONE: The ABN 25 Foot Acetylene / Oxygen Torch Hose Twin Pack is designed to transport oxygen and acetylene gases to your welding torch or cutting equipment for your metalworking projects.
- Twin oxygen and acetylene torch hoses are flame retardant and suitable for indoor and outdoor use in your home, mechanics shop, or on any job site.
- PERFECT SIZE FOR YOUR NEEDS: 25 foot torch hose length (7.6m) allows you to safely keep the tanks away from the torch tip while servicing your vehicle.
- Oxy Acetylene torch kit gas hose features a 1/4-inch (6mm) inner diameter (ID) and 1/2-inch (13mm) outer diameter (OD) and has a maximum pressure of 300 PSI (20.7 Bar) to supply optimal flow rate.
- FITS YOUR WELDING TORCH AND REGULATOR: Twin welding torch hose includes standard B fittings on both ends (4 threaded fittings total) to connect to your existing regulator or cutting torch kit.
- Make sure that your regulator and oxy acetylene cutting torch handle are "B" size (9/16 inch - 18) air hose fittings to ensure exact fitment.
- KEEP LINES DISTINGUISHABLE: Red and green twin hoses provide a color-coding system to hook up to your regulator and oxy torch kit safely.
- One rubber hose includes right-handed fitting threads, and the other welder hose includes left-handed ....
Check Stock(2 Pack) Petrol Gel Food Grade Equipment LubricantNSF (2/4 oz. Tube)
- Authorized by USDA as a lubricant for Use where incidental contact with food may occur, USDA rated h-1, FDA approved.
- Technical white grease, impervious to water, will NOT taint, operating temperature 0-185 degrees.
- Petrol-gel is the purest of lubricants, made with odorless, tasteless high viscosity Index paraffin base oil.
- Petrol-gel is compounded with appropriate food grade additives to meet the performance demands for all Recommended applications.
Check Stock6 Pack Metal Citronella Torches DIKAIDA,Light Torches Garden for Outside 60 inch Flickering Flame Citronella Outdoor Light Torch,Metal Torches for Outside, Camping Patio Pathway Table Torch(Jet Black)
- 【6 Pack torches for outside】Includes 6 citronella torches outdoor,6 torch head, 6 long lasting fiberglass wicks,6 pole,6 metal snuff caps,6 bottom metal nails,used to insert the ground to stabilize the pole,24 screws,18 stakes,1 installation manual.If filled with lights torch fuel or citronella oil, it can be used for about 8 hours. Note,Please carefully review the installation steps on the Product Description page. No disturb the installation sequence of the long and short screws..
- 【Easy to Assemble】 Our Metal Citronella lights torches for outside is very easy to install. 6 pack outdoor citronella torches 65 inch are Just connect 6 short screws and 18 long screws with 3 longer piles, 1 torch ground pile and torch head respectively and tighten the torch screws. Torches for outside are made of high quality metal, durable and long life span. It can be disassembled and assembled, easy to use.its prefect choice for traveling, camping,christmas, party, patio, outdoor light use..
- 【Easy To Refill torch Funnel,No Need Any Tools】 we recommended this torch outdoor dancing flickering flames using a lights torches funnel when filling torches with torch oil. Please u....
Check StockForney - 85657 9FV TIG Torch
- TIG TORCH FLEXIBILITY-torch head adjusts to make any angle weld, ideally on thin materials.
- AIR COOLED TIG TORCH- size 9, single flexhead TIG torch with valve located on handle.
- COMPATABLE WITH FORNEY WELDERS- the 9FV TIG Torch holds a 125 AMP capacity with an electrode range of . 02 - 3/32". That can be used with a 200 amp Forney Welder or a lower amp welder with a size 25, DINSE connection.
- PRODUCE A HIGH QUALITY WELD-using Forney's TIG Torch on basic materials such as: stainless steel, titanium, magnesium, aluminum and copper.
- INCLUDES: 12. 5’ torch with 3/32” collet and tungsten electrode, size #6 nozzle, 5/8” connector and 36” gas hose.
Check StockLawnmower
- ❥❥❥ Widely Application: It is great for pumping fuel oils, petrol, diesel, lubricating oil, cooking oils and many other oils. BUT DO NOT pump....
- ❥❥❥ Main Function: With this hand crank pump, you can pump oil quickly and easily from barrels and oil drums and small tanks. Keep this pump in....
- ❥❥❥ Use Tips: Add some oil that requires pumping into the pump to prime it before you start to pumping oils. Lubricate the pump with grease is....
- ❥❥❥ Specifications: Main Material: Aluminum Alloy. Inlet Diameter: 3cm / 1.18in. Outlet Diameter: 2.5cm / 0.98in. Length: 124cm / 48.81in.....
Check StockTractor Maintenance Log Book: Tractor Repair ,Servicing and Maintenance Logbook| Routine Inspection Log For Farmers and Company (Volume 13)
- Odorless, tasteless high viscosity Index paraffin base oil.
- Technical white grease, impervious to water, will NOT taint.
Check StockEngine Fuel Injector Removal Tool Puller for Land Rover Range Jaguar 5.0L V8
- Injector Removal Tool Puller for Land Rover 5.0 3.0.
- Easy Remove Fuel Injector: Usually, Injectors on vehicles are very tough to pull in general , but this tool could easy remove fuel injector, Improve efficiency, save a lot of time, it's possible to remove injectors from a Range Rover without it, is a must tool for remove fuel injector.
- Application: This fuel injector remover tool compatible with Land Rover/Jaguar 3.0 5.0 petrol engine, fit for Jaguar X150, XK Series, X250(XF) and XJ models (V8 5.0lt petrol engines). fit for Land Rover Discovery 4, new Range Rover, Range Rover Sport (V8 5.0lt petrol engines), replace OEM 310-197.
- Exceed OEM Design: Our fuel injector remove tool improved on the basis of OEM, our design more easy to use, give auto repair engineers a better experience.
- Quality Guarante: This fuel injector remover tool made of high qualuty steel, high hardness and strong endurance to ensure that it is still intact after high-strength impact, and we offer lifetime warranty..
- Tips: Before use, please tighten the nut at the end of the slider to prevent it from slipping off during use.Hold slight downward pressure on the locking clasp as u use the slide hammer to pop the injector free,that will get better results.
Check Stockravs Refillable Butane Torch, Pure Copper Soldering Torches with Adjustable Precision Flame, Blow Torch for Welding, Resin Art, Dental and Crafts. Industrial Torch Lighters - Butane Gas Not Included
- [Compact and Portable Design] RAVS pure-copper propane torch lighter with a lightweight body, ergonomic handle which is the best design that offers ease of use and convenience. With piezo press ignition, The mini torch provides immediate and fast ignition. A sturdy and detachable base made of copper will allow the kitchen torch lighter to stay without falling, free hands..
- [Safe and Durable] Our butane heat gun goes through rigorous 3rd party testing to make sure that the cigar lighter meets industry safety guidelines. The dab torch is made of pure copper material, sturdy and durable. The creme brulee torch with a High temperature-resistant thickened insulating ceramic ring provides safety and durability in use. A long angled nozzle of the hand torch for dabs keeps your hand safely away from the flame..
- [Refillable and Easy to Use] The flame regulator and ignition button are within the reach of your thumb which allows one-handed operation. The Flame of the cooking torch is adjustable, you set the size of the flame as per your project requirement. And the micro torch built-in Leak-proof Inflation valve for easy refilling. It usually takes 15 seconds for full refillin....
Check Stock