Top Pilot Bits

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • ...it For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Bits secured with pin Never Come Loose from shank. Drill countersink set with logo brand name laser printed on each countersink bit quick change 1/4" hex shan....
Check Stock

Yakamoz 5Pcs Taper Drill Countersink Set 1/4 Hex Shank Countersinks with Tapered Point Pilot Drill Bits for Woodworking

  • Quick change 1/4" hex shank for power drill, 7/64", 9/64", 11/64", 3/16", 7/32" HSS taper drill bits ideal for installing screws..
  • Use these countersinks to drill the pilot hole and countersink hole in one step..
  • 4-Flute cutter countersink and tapered drill bit provide superior speed and ideal finish..
  • Adjustable countersink along taper drill to get proper pilot hole depth for different length screws..
  • Made of High Speed Steel (HSS) drill bits with alloy steel countersinks, good cutting performance on hardwoods and composites and long life use..
Check Stock

Sabre Tools 5/16 Inch Cobalt Drill Bits – 5pcs Drill Bits for Metal, M35 Cobalt Metal Drill Bit Set, Pilot Point Tip – Heavy-Duty Drill Bits for Steel, Hard Metal, Cast Iron (5/16" x 4-1/2")

  • What You Get: This drill bit set for metal includes 5 – 5/16 Inch x 4-1/2 Inch bits of the same size..
  • A Must in Your Tool Box: This cobalt drill bit set is designed to surpass your expectations in terms of durability and performance, ensuring fast and easy penetration through hard metals..
  • Heavy-Duty Material: Our drill bits for hardened steel feature a heavy-duty construction made with M35 cobalt, which has excellent durability and superior resistance against abrasion and high heat..
  • Pilot Point Tip: These cobalt drill bits feature a pilot point tip that prevents slipping and can help increase drilling speed while ensuring smooth and easy penetration through hard metals..
  • Wide Range of Applications: Our cobalt drill bits for hardened steel are suitable for hard metals, stainless steel, cast iron, steel, titanium alloy, hard plastics and more, and a wide range of applications such as repair, construction, or woodworking..
Check Stock

3pc Vix Bit 3,5,9 Hex Shank by VICK TOOL CO

  • Set Includes 3 Size Self-Centering Pilot Bits.
  • Drill Pilot Holes for #3, 4, 5, 6, 8, 9 and 10 Wood Screws.
Check Stock

This Heart of Mine

  • Set of 21 jobber length drill bits includes inch sizes 1/16" through 3/8" in 1/64" increments.
  • High-speed steel (HSS) provides hardness for wear resistance.
  • Black oxide finish reduces bit wear while promoting chip and coolant flow on ferrous material.
  • Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging.
  • Extra thick web for increased strength and rigidity compared to standard drill bits.
Check Stock

DEWALT Drill Bit, Pilot Point, Industrial Cobalt Alloy Steel, 3/8-Inch (DWA1224)

  • Drill bit has maximum speed and life in stainless steel and other hard metals.
  • Pilot point and split tip design of drill bits for wood, metal and plastic starts on contact and eliminates bit walking.
  • Heavy-duty Cobalt Alloy Steel of DEWALT drill bits delivers 4 times more life than black oxide..
Check Stock

Eagles 4PCS Self centering Hinge Drill Bits for Door Cabinet + 5PCS HSS Woodworking Countersink Drill Bit Set with Free Wrench for Pilot Holes

  • 【Unique Combinate】This Woodworking drill set included 4pcs Self centering Drill Bits, 5pcs HSS Countersink Drill Bit and free Quick Change Hex Shank.
  • 【Precision Drilling】Center drill bit accurately drill pilot holes in hinges, handles, drawer slides, and other hardware, ensure the screws are straight and flush for proper hardware installation.
  • 【Wood chips are automatically discharged】 Sawdust will be automatically drained from both sides of the holes, without drill blocked,you don’t have to remove wood chips , effectively increasing your work.
  • 【Woodworking Countersink Drill Bits set】 Woodworking Chamfer, can drill the countersink hole and counter bores pilot hole and keep both on the same axis.after the screw is screwed on, the screw cap is below the plane of the board!.
  • 【Adjustable】Drilling length can be adjusted for #5 #6 #8 #10 #12 screws length simply by use a wrench to remove or adjust the setscrew..
Check Stock

WORKPRO 15-Piece Router Bits Set, 1/4-Inch Shank Tungsten Carbide Router Bits for Woodworking, Solid Woods, Hard Woods, Chipboard, MDF, DIY, and Carpenter

  • 【VERSATILE ROUTER TOOL SET】The set includes 1/4 inch router bits set, that is dovetail bit, mortising bit, panel pilot bit, cove bit, 4* straight bit (1/8'', 1/2'', 1/4'', 5/8''), roman ogee, 2* cove box bit (R1/4'', R1/8''), 45-degree chamfer, flush trim, confer round, 90-degree "V" grooving bit and storage case.
  • 【SHARP&DURABLE】Carbide router tips head, precisely machined, sharp, and heat-resistant, last 80-90 percent longer than HSS bits. With two cutting edges, the router bits set surpass single-edge bits in making smooth cuts. The inclined angle facilitates the removal of wood chips.
  • 【SAFE FOR USE】These bits with plenty of metal behind each cutting edge.
  • Anti-kickback design prevents kickback caused by fast feeding and deep bites. What's more, the 1/4 inch shank bits provide greater stability and less vibration during operation.
  • 【EASY TO STORE&CARRY】Storage case with identification for easy access and organization. The case also helps protect the router bits while on the travel or during working time.
  • 【WIDELY APPLICATION】Effective for edging, trimming, veining, and grooving all types of wood.
  • perfect for door panels, picture frames, plywood, and other carpeting projects. Suitable for the hobbyist and for light work.
Check Stock

Mophorn 980W Magnetic Drill Press with 1-1/3 Inch (35mm) Boring Diameter Magnetic Drill Press Machine 2700 LBS Magnetic Force Magnetic Drilling System 680 RPM Portable Electric Magnetic Drill Press

  • Maximum Travelling Distance: 4.92"/125mm. Besides, our magnetic drill can only be used with hollow boring bits, and annular bits less than 0.3"/8 mm in diameter..
  • Useful Accessory Kit: We provide you a rust-proof stainless steel cooling pot with the capacity of 21.36 Cubic Inch/350ml and a pilot pin. The pilot pin can remove screws and assist in the installation & removal of bits..
  • 10,000N Magnetic Force: The powerful two-stage magnet can generate 10,000 N of holding force, ensuring the drill press machine will not move in the work. Thanks to its Electromagnet base, our magnetic drill press anchor itself securely during use through its solid iron bottom..
  • Thoughtful Designs & Cooling System: This ergonomic design handle provides comfortable grip in operation and transport. These 3 extended crank handles are coated with nonslip rubber for laborsaving operation. Coolant tank, dustproof air inlet, and exhaust air holes are designed for cooling the magnetic drill press during overheating..
  • Various Applications: This versatile magnetic drill press is immensely suitable for industrial and steel fabrication, ship or bridge building, railway manufacture, wind power generation, power-plant construction, home improvement, equipment insta....
Check Stock

FTG USA Replacement Tapered Countersink Drill Bit Set 3 Pc (#10) 3/16' Countersink Bit Same Size Bit Replacement Only, Countersink Replacement Drill Bit FTG Maximum Torque Wood Bits Secured with Pin

  • ...ck change 1/4" hex shank. Counter sinker drill bit replacement set, drill bits secured with pin, professional FTG drill countersink set Maximum Torque. Packaging set combination unique design protected by US Copyright Office.
  • Replacement countersink drill bits with pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. All FTG countersinks hex drill bit sets with tapered countersink bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink replacement drill bits designed as to work as wood drill bits. All same size replacement tapered drill bit for drill countersink.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 drill bit replacement set. Countersink replacement bits set with tapered drill bits. Top Quality 11/64 inch tapered and double flute drill bit.
  • HSS M2 Grade 6542 the most popular High-Speed Steel, for its high toughness, and good cutting edge retention. FTG 2345P countersink replacement drill bit set for drill bits with countersink.
  • STORAGE CONTAINERS for this set available below, at section " Make it a bundle". Replacement counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG U....
Check Stock

BOSCH SP515 5 Piece Hex Shank Countersink Drill Bit Set with #6 #8 #10 and #12

  • VERSATILITY: Bosch hex shank countersink bits feature adjustable depths and provide precise, clean pilot holes in wood, plastic and composite materials.
  • 3 in 1: Drill, Countersink and Counterbore in one step.
  • UNIVERSAL FIT: The Bosch SP515 countersink set fits all Bosch and competitive brands drill/drivers.
  • USE WITH: For use with Allen wrench (included in set).
  • the hex shanks fit 3/8 in. and 1/2 in. corded and cordless drills.
  • ACCESSORIES: Replaceable bits offered (sold separately).
Check Stock