Top Pipe Fitting Welder

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

boost/vacuum gauge silicone coupler adapter - Car Turbocharger Pipe Fitting Universal Turbocharger Silicone Boost Pipe Hose Nipple Turbo Vacuum VAC Gauge Fitting TDI

  • Wide Application---The turbocharger pipe fitting is suitable for a 4mm inner diameter pipe. 100% brand new aftermarket Boost Pipe Fitting that has never been used.
  • For Boost Gauge---This boost hose nipple fitting allows you to fit a boost gauge or any other type of instrument where vacuum or boost pressure is required.
  • Superior Quality Aluminum Alloy---The turbo boost pipe hose nipple is made of high quality aluminum alloy and durable to use. The manufacture of the fitting meets the strict quality requirements.
  • Easy Installation---The turbocharger mounting kit is easy to install, simply drill a 8mm hole in your silicone boost pipe and push the nipple through the hole (from the inside), put on the sealing o-ring, washer and tighten down with the nut.
  • Quality Assurance---As a professional seller, we provide high quality products and considerate services. Every product must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.
Check Stock

ANDELI TIG Welder MOS Tube Multifunctional Cold Welding Machine with Hot/Cold/TIG Pulse Cold TIG Welding Machine （110/220V） TIG-250MPL

  • 【Multifunctional tig welder】TIG, Pulse, COLD function. the welding speed is fast, the welding process is the best.This is optimized to deliver a....
  • 【COLD】ANDELI Cold Welder Realize real cold welding, Reducing deformation, little discoloration. The color of stainless steel welding bead is....
  • 【Applicable Material】Ordinary thin steel, carbon steel, stainless steel, iron and etc. Suitable for homehold DIY and general maintenance work..
  • 【Delivery Package】110/220V TIG-250MPL, ground clamp 2m, COLD torch WP-9F 4m, TIG torch WP-17F 4m, gas pipe 3m, nozzle*20, collet*20, house....
  • 【Safety】CE certification, Efficient customer service team, if you encounter problems when receiving the goods, you can contact us for free....
Check Stock

Oatey 30863 Heavy Duty Solvent Cement, 8 Oz, Can, Liquid, Clear

  • Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure.
  • Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements.
  • Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure.
  • Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD).
  • Thick formula fills gaps in large diameter pipe and loose fitting joints.
  • Recommended for potable water, pressure pipe, conduit and DWV.
  • Recommended application temperature 40°F to 110°F / 4°C to 43°C.
Check Stock

ANDELI Cold Welding Machine 110V/220V TIG-250MPL TIG Welder MOS Tube Multifunctional With Hot/Cold/TIG Pulse Cold TIG Welding Machine

  • 【Multifunctional tig welder】MOS Tube Multifunctional With Hot/Cold/TIG Pulse Cold TIG Welding Machine,the welding speed is fast, the welding....
  • 【Cold welder】The core cold welding technology,exquisite weld bead, the welding point temperature is low, the deformation is small, the color of....
  • 【Delivery Package】110/220V TIG-250MPL, ground clamp 2m, COLD torch WP-9F 4m, TIG torch WP-17F 4m, gas pipe 3m, nozzle*20, collet*20, house....
  • 【Intelligent adjustment】Screen Digital intelligent display,storage store the welding parameters,parameter capable for adjustment when welding.
  • 【Applicable Material】Ordinary thin steel, carbon steel, stainless steel, iron and etc. Suitable for homehold DIY and general maintenance work..
Check Stock

2Pcs Silver Streak Welder Pencil with 48PCS 2.0mm Silver Round Refills in 4 Boxes,Mechanical Carpenter Pencils Metal Marker with Built-in Sharpener for Steel,Pipe Fitter Welder,Construction Woodworker

  • Enough quantities replace:The package contained 2 pieces of welders pencil and 48 pieces silver round refills in 4 boxes,it’s enough to meet your daily need and replace..
  • Illuminate metal marker:The 2 mm round silver refills can lay out an illuminate marker that is not easily erased compared with other pen,and the reflective marking can make a visible sign on metal for welder.
  • Unique design:Each welder pencil has a built in sharpener,when you want to sharpen the tip of the pen,you can sharpen it directly,and the top has a clip that can be fixed on clothing,it’s not easy to fall off..
  • Make up for mistakes:When you accidentally draw the wrong line,you can wipe it with damp cloth,and the silver marking line will disappear soon,and you can draw the right line again.
  • Wide Range of Application:These mechanical pencils are suitable for pipe fitter welder,construction steel woodworker,architects designers,students,office workers,etc,be care about suitable for all deep colour materials,but not suitable for pure white.
Check Stock

iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings

  • CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
  • CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
  • Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
  • To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
  • The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.
Check Stock

LEGO Minifigures Series 11, Grandma

  • repair a broken deck plate fix cracked pipe.
Check Stock

No Flux Given - Funny Welder Tee Shirt For Welding Dads

  • NO FLUX GIVEN - Funny Welder Tee Shirt For Welding Dads , Boyfriends. PERFECT GIFT for dad, mom, husband, wife, girlfriend or boyfriend. Great gift for Christmas, Birthday, Valentine's Day, Father's Day, Mother's Day, Anniversary, Wedding, Graduation!.
  • Perfect welding gift idea for someone looking for welder hats, welder live the dream, welder off duty, welder ornament, welder retro, welder rockstar, welder stickers, welder shirt, welder t shirts, welder tshirts, welder t shirt..
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

Brooklyn Pipe Flange - 16 Pack 3/4' Black Floor Flange Cast Iron Pipe Fittings | Our 3/4 Inch Pipe Flange | Industrial Pipe Flanges | Decorative Pipe Fitting Fit for Steampunk Furniture

  • 3/4 INCH FLOOR FLANGE - Our Brooklyn Pipe floor flange is a great choice for all your DIY needs. This decorative flange is the perfect pipe fitting to take your project to the next level. These fittings are for DIY projects only, they are not rated to carry gas nor water..
  • INDUSTRIAL DECOR- Our 3 hole black floor flange is 2.75" inches in diameter and provides a unique look for all projects. Whether you're looking for an industrial, steampunk, vintage, retro, factory look, our flange will fit perfectly into your project..
  • SUPPORT AMERICAN BUSINESS – Brooklyn Pipe is a small business headquartered in New York. We would really appreciate the opportunity to show you what makes Brooklyn Pipe the #1 top rated pipe fitting brand. We always go the extra mile for our awesome customers!.
  • NO CHINA STAMP - Our forged malleable iron flange doesn't have the word "CHINA" stamped into the flange which is another reason why Brooklyn Pipe stands out in the pipe fitting products that are on the market. Our 3 hole flange is just as strong as the competition but simply looks better!.
  • QUALITY CONTROL - We’ve partnered with world class steel factories and hire licensed inspectors to review our Brooklyn Pipe products prior to being packaged. Rest assured you are getting to....
Check Stock

PVC- 4 way L/T 2' (Furniture Grade White)

  • DO NOT use these fittings for plumbing projects..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • All four outlets are non-threaded sockets.
  • 2" Fittings fit on 2" Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • Furniture Grade means this fitting has a non-marked, glossy finish..
Check Stock

1-1/2" 4-way Tee PVC Fitting Connector

  • Furniture Grade means this fitting has a non-marked, glossy finish..
  • DO NOT use these fittings for plumbing projects..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • 1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • All four outlets are non-threaded sockets.
Check Stock