Top Plasma Cutting Gloves

Dynaloop Plasma Cutter 50Amps, Dual Voltage 110V 220V Plasma Cutter Machine, 8-10mm Cutting Thickness,16Pcs Plasma Cutting Equipment (DC500D 110V220V)

  • 【Inverter plasma cutter】： DC500D has the function of Inverter technology high frequency arc initiation（50/60HZ）. This plasma cutter needs to touch the workpiece to arc, we suggest pilot arc function If you don't like to touch metal to arc..
  • 【Automatic voltage detection】：Plasma cutting machine can adapt to dual-voltage, whether access 110V or 220V circuit can be automatically identified, and displayed on the front panel, no manual adjustment..
  • 【Air Filter Pressure Regulator Combo】：Plasma cutting machines cut materials by compressing gas(Oxygen,air, inert and others depending on material being cut ), Air regulator inside the machine can lower or maintain air pressure and filter moisture and fine particles from the air to reach effective cutting..
  • 【Cutting Thickness】The plasma cutting machine can cut different thicknesses under different voltages. ✨110V: 35A, 30-50PSI (Quality cutting thickness is 6mm#60PSI(0.6Mpa).
  • Max cutting thickness is 10mm#60PSI( 0.6Mpa)).
  • ✨220V: 50A, 30-70PSI(Quality cutting thickness is 10mm#65PSI(0.65Mpa), Max cutting thickness 14mm#65PSI(0.6Mpa))..
  • 【Portable & Multi-purpose】20lb cutting machine can be carried anywhere to cut workpiece, suitable for cutting stainless steel, alloy steel, low ca....
Check Stock

WeldingStop 0.9mm Contact Tip IPT-60 PT-60 electrode drag shield retaining cup 30-40A plasma cutting nozzle 23pcs

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 10pcs Electrodes + Tips and 1pc Retaining Cup + 2pcs Drag Shield.
  • There are 23pcs plasma cutter IPT60 consumables in every package.
  • The diameter of tips are 0.9mm or 0.035 inches, plasma cutting current is about 30-40A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock

ICE-60T/TM Plasma Torch Electrode Tip 212724 219676 Drag Shield 212730 for Miller Spectrum 875 Cutter 35pcs

  • 35pcs Plasma cutting consumables kit equivalent to Miller Spectrum 875 cutter ICE-60T ICE-60TM plasma cuttin torch.
  • Plasma electrode x 10pcs, reference code 212724.
  • Plasma tip / nozzle x 20pcs, reference code 219676.
  • Plasma drag shield x 5pcs, reference code 212730.
  • This is plasma cutting torch aftermarket replacement item which manufactured by WS,not original.
Check Stock

Pack-42 WS OEMed KP2062-3B1 Nozzle Tip KP2063-1B1 Electrode KP2065-1 Drag Cup Fit Lincoln PRO-Cut Plasma Cutting Torch

  • The package will include 20pcs of Electrode, 20pcs of Tip and 2pcs of Drag Shield Cap.
  • There are 42 pieces plasma cutting torch consumables in the package, Electrode (KP2063-1B1), Tip/Nozzle(KP2062-3B1) and Drag Shield Cup(KP2065-1).
  • The electrodes, tips and other consumables are fitting in Lincoln PRO-CUT 55/80 plasma cutting torch, not PRO-CUT 25 Plasma Cutting Torch, or PCT20/80 Plasma Cutting Torch.
  • The diameter or this KP2062-3B1 Tip or Nozzle is 1.3mm or 0.053'', it also lack vortex / swirl device.
  • All the plasma cutter torch consumables are aftermarket kits and replacement parts, NOT Brand or Original.
Check Stock

Reboot Plasma Cutter 45 Amp IGBT Inverter RBC4500 AC 220V Air Plasma Cutting 1/2 Clean Cut 15MM Max Cutting High-Frequency Duty Cycle for Aluminum Stainless Mild Steel Copper Iron

  • [Cutting Thickness] Plasma Cutter 20-45A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V,air pressure 60PSI....
  • [Blowing Back] Plasma cutting Torch Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and....
  • [Generator Supported] this plasma cutter 45amp works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V.
  • [Wildely Application and Low Cost] this plasma cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • [Warranty] buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local....
Check Stock

WeldingStop Plasma Consumables Fit Miller Spectrum 3080 Cutter ICE-80CX Torch 212724 Electrode 212726 Tip Drag Shield 212730 PKG/25

  • The electrodes and tips in the list can be used on Miller Spectrum 3080 Plasma Cutter ICE-80CX Torch (Torch Ref. Number: 216300, 218044).
  • This list contains 10 x 212724 Plasma Electrode.
  • And 10 x 212726 Plasma Tip / Nozzle + 5 x 212730 Plasma Drag Shield Cup.
  • The Nozzles or tips plasma cutting current need under 80A.
  • All the plasma cutting torch consumables for ICE-80CX torch are Replacement Parts, NOT Miller Original Kits.
Check Stock

Plasma Cutter 110&220V 45Amp 1/2\ Clean Cut 3/5'' Max Cut Plasma Cutting Machiner,HF IGBT Inverter Portable Plasma Cutting Equitment for Aluminum Alloy Mild Steel Cast Iron

  • ...rials than standard DC plasma cutters. Cuts faster with less distortion in the workpiece.It is easy to ignite arc by adopting HF arc ignition.With IGBT inverter technology, It is long life and efficient higher than most machine. It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • ✅【Cutting Thickness】20-50A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V. 20-35A DC output: 1/3" ideal clean cutting and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation..
  • ✅【Wildely Application】This plasma cutting machine available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work,repair/maintenance,metal processing,manufacture ect,lightweight and portable,also suitable home DIY and industrial projects ..
  • ✅【Setup Simple】Automatic Dual Voltage Transfer / Dual Frequency (110/120 V 220/240 V 50/60Hz),With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional. Air post time adjust function, the adjustment range is 1-15seconds ,this function allow user adjust the time for post air to cool torch head effectivel....
Check Stock

WeldingStop 9-0093 9-0096 Plasma Electrode Tip for Thermal Dynamics CutMaster 42 Cutter SL40 Torch PK-40

  • These plasma electrodes and tips can fit Thermal Dynamics CutMaster 42 Cutter and SL40 Plasma Cutting Torch.
  • There are total 40pcs of plasma cutting SL40 torch conusables in the package.
  • The plasma electrodes and tips are replacement parts, NOT Thermal Dynamics Original plasma consumables.
Check Stock

Plasma 600 Cutting Torch Electrode 120573 Tip 120826 Nozzle Drag Shield 120828 Replacement Parts 12pcs

  • These plasma cutting electrodes & Tips can fit in PMX 600 Cutter Torch, Hand Cutting Drag Shield Process.
  • List contains 5 x 120573 Electrode and 5 x 120826 Tip / Nozzle and 2 x 120828 Drag Shield Cap.
  • The code just for reference, this NOT means that the plasma kits are original parts.
  • The plasma consumables are replacements, NOT original!!!.
  • You will get 12pcs of plasma kits for 600 series torch consumables, for hand held plasma torch.
Check Stock

IPT 60 Consumables Kit 0.9mm for Everlast PowerPlasma 50S/60S PowerPro 205S/256S Plasma Cutter 10pcs

  • Plasma swirl ring ref code: 60028 / IVF0601.
  • Plasma swirl ring can fit Everlast PowerPlasma 50S / 60S plasma cutters and PowerPro 205S / 256S plasma cutters IPT-60 / PT-60 torch.
  • You can get one (1) piece plasma cutting swirl ring with this price.
  • These palsma cutting consumables are aftermarket parts, not Origianl.
Check Stock

IPT-60 Torch Swirl Ring IVF0601 for Everlast PowerPlasma 50S/60S PowerPro 205S/256S Plasma Cutter 5pcs

  • Plasma swirl ring ref code: 60028 / IVF0601.
  • Plasma swirl ring can fit Everlast PowerPlasma 50S / 60S plasma cutters and PowerPro 205S / 256S plasma cutters IPT-60 / PT-60 torch.
  • You can get Five (5) pieces plasma cutting swirl ring with this price.
  • These palsma cutting consumables are aftermarket parts, not Origianl.
Check Stock

Warfox Plasma Cutter 120/240V Dual Voltage Plasma Cutting Machine, Max Cutting Thickness 14mm, Clean Cutting Thickness 10mm in 65PSI (CUT50D 120/240V)

  • Plasma Cutter, 120V/240V 50A plasma cutter with IGBT inverter technology, long life and efficient higher than mosfet machine. IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • Plasma cutting machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumable's working life.
  • Max cutting thickness 14mm ,10mm quality cutting thickness in 240v@65PSI 50A.
  • Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm.
  • Accessories included:4M PT31 cutting torch, 2.5M Earth clamp,5pcs tips, 5pcs electrodes, 2 meters air hose, 4pcs hose clamp, 1adaptor, 1 manual.Air regulator,air filter,air gauge are fixed at machine.
  • The cutting machine can cut carbon steel, stainless steel, steel and other materials. It is an indispensable machine in your tool room.
Check Stock