Top Plastic Fitting

Holdup Hip-Clip Style Under-Ups with the Patented Composite plastic Gripper Clasps (Black 1 1/2')

  • 1 1/2" wide all black trucker style patented undergarment suspenders with black strong composite plastic Gripper clasps.
  • Hidden soft black suspenders made to wear under any loose fitting shirt with shorts or pants.
  • Attaches with just 2 no-alarm patented composite plastic black clasps.
  • Super soft dense weave 1 1/2" wide elastic straps with smooth Hook and Loop (no bulges) length adjustment system.
  • Side-clip all black trucker comfortable hidden suspenders worn under any loose fitting shirt or blouse.
Check Stock

Class A Customs | One (1) RV Fresh and Gray Water 30 Gallon Tank | T-3000

  • ...ew photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..
Check Stock

Joywayus 3/8\ Tube OD Brass Ferrule Fittings Compression Sleeves Brass Compression Fitting(Pack of 50)

  • Size:3/8" Tube OD. Package included: 50pcs Compression Ferrule Sleeve. It is packed in plastic box to avoid product damage..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
  • 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Jevrench 3/4 Inch PVC Bulkhead Fitting, Durable Threaded Bulkhead Water Tank Connector for Rain Barrels, Aquariums, Water Tanks, Tubs, Pools (3/4 Inch, 1PCS)

  • ☘️BULKHEAD FITTING SIZE: bulkhead fitting is 3/4 inch FHT（refers to The bulkhead female thread size）, connector size is 53x 47 mm/2.1 x 1.85 inch, The lock nut is reverse threaded with 4 mm thick silicone gasket that will adjust to the shape of the round barrel, the right size can meet most of your needs and they will work well..
  • ☘️EASY TO INSTALL: The bulkhead fitting is easy to operate and quick to install, first drilling 1-1/2 inch holes in the tank for installation, assembling the bulkhead and hose adapter together, suitable for home, commercial and industrial use.
  • ☘️STRONG AND DURABLE: The bulkhead fitting adapter is made of high quality PVC, which is colorfast and durable, and lasts longer than ordinary plastic fittings，and it comes with a clear silicone gasket for better sealing performance..
  • ☘️ESSENTIAL TOOL: PVC Bulkhead Fitting fits most rain barrels, water tanks, ponds, or aquariums, it is durable and convenient..
  • ☘️OUR SERVICE: We will always put customer satisfaction at the first. If there are any problems with our PVC bulkhead fitting, please contact us and we would be very happy to solve your problems..
Check Stock

Mars 11917

  • Panel-mounted, barbed fitting allows tube connection on the side of a barrier.
  • Fitting connects to tubing on one end and a female connector on the other.
  • Acetal copolymer plastic for low moisture absorption and high tensile and flexural strength.
  • Buna-N O-ring elastomer seal for long cycle life and repeatable, leak-free connection.
  • Single-barb for increased pull-off resistance compared to three-barb styles.
Check Stock

Camco 11360 24"ID Plastic Drain Pan

  • Durable plastic pan will not rust, corrode or crack.
Check Stock

UltraPure 3403410 1/4\ MPT x 3/8\ Tube Ozonator Compression Fitting

  • Sleeve for a tube compression fitting. Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube.
Check Stock

HVAC Master Flow 60 in. x 30 in. Drain Pan with PVC Connector - 26 Gauge 26DDP60x30

  • PLASTIC DRAIN PAN FOR HVAC SYSTEMS: Perfect for collecting condensate from cooling and evaporator coils to prevent damage in any indoor location where overflow from the HVAC equipment drain pan occurs.
  • DURABLE CONSTRUCTION: Made of ABS plastic with rolled edges, reinforced corners, and a ribbed bottom for strength and rigidity.
  • SEAMLESS DESIGN: Constructed without seams to ensure there is no leakage or rust, even with continued use.
  • PVC FITTING INCLUDED: 3/4" diameter PVC discharge fitting is included with each pan for your convenience.
  • IDEAL SIZE: Measuring 24" x 24" and 2" in depth, this drain pan is the perfect size for your A/C unit.
Check Stock

Viagrow Hydroponic Flood and Drain Ebb and Flow Kit

  • ·         Each kit is made from 100% virgin plastic and is BPA free.
  • Can be used for hydroponics, Tidal irrigation, Aeroponic, aquaponics, flood and drain and drip irrigation systems.
  • Comes with one ½ inch outlet fitting, two gaskets, one ¾ fitting, two gaskets, two screens and three flood drain extension pieces..
Check Stock

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

  • ... +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

SKYFOOST 4 Pcs PVC Bulkhead Fitting, 3/4 Inch Male 1/2 Inch Female Water Tank Connector with Plugs, Bulkhead Tank Fitting with 2 Rubber Ring Stablizing for Rain Barrels, Aquariums, Water Tanks (4)

  • ...ur bulkhead fitting 3/4 inch is a must-have tool for breezy, rustic Irrigation work. This professional bulkhead fitting is robust, durable, and It even comes with a plug to help you seal the water tank. Each bulkhead fitting barbed quality PVC material, which is colorfast and durable, and lasts longer than ordinary plastic fittings, and comes with two thick silicone gaskets for better sealing performance..
  • EASY INSTALLATION WATER TANK FITTINGS: Get outstanding results with our PVC bulkhead fittings. Each PVC bulkhead fittings tool takes the hassle out of the rain barrels, water tanks installation, and renovation. First, you need to drill a 25-26mm hole for installation and then assemble the Water Tank Connector and plug connector, cover the plug to prevent dirt and dust from entering the water tank, and keep it clean..
  • SUITABLE FOR CORNER OF YOUR GARDEN: We trust in a product that will not only get the job done but also do the job best. This PVC bulkhead fitting 3/4 inch is the perfect tool for sealing rain barrels. The bulkhead tank fitting can install in water tanks, storage buckets, and rain barrels, suitable for household, commercial and industrial use. It will ....
Check Stock

Certified Appliance Accessories Ice Maker Water Line, 6 Feet, PVC Core with Premium Braided Stainless Steel

  • ✔COMPATIBILITY: Compatible with water filter system or reverse osmosis with 1/4" or 3/8" plastic water line. Fits for iSpring, APEC Water Systems, Whirlpool, Express Water Reverse osmosis system, And Frizzlife MP99, Culligan, Brondell, Aquasana Water filtration system..
  • ✔MULTI-USAGE: Provides pure water from your RO system or water filtration system to your ice makers, refrigerators, water coolers, fridge dispensers and more. The T fitting allows the system to function for both application with no loss in performance..
  • ✔COMPLETE ICE MAKER WATER LINE KIT: 20feet NSF certified 1/4" tubing, TWO set compression fitting nut, 1/4" Tee fitting and 3/8" Tee fitting allow you to connect to both 1/4" and 3/8" water line water purifier system or RO system..
  • ✔TOOL-FREE INSTALLATION: Push-in quick connect fittings offer easy DIY installation with no tools required..
  • ✔HIGH QUALITY COMPONENTS & 100% SATISFACTION: Superior high strength quick connect fittings and adapters ensure long lasting and a guaranteed leak free experience..
Check Stock